• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.2
• /
• pp.231-238
• /
• 1993

A rules of fuzzy control is to represent an expert‘s and engineer‘s ambiguous control knowledge of system with some lingustic rules. This rule is very difficult to represent perfectly because expert‘s knowledge is not precise and the rule is not perfect. We propose the fuzzy reasoning and learning to upgrade precision of imperfect rules successively after system running. In the proposed method, the precision of the backward part of a fuzzy rule is improved by back propagation learning method. Also, the method reasons the compatibility degree of the forward part of fuzzy rule by associative memory method. This method this is successfully applied to design auto-parking fuzzy controller in which expert‘s technology and knowledge are required in the limited area.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.11a
• /
• pp.74-79
• /
• 1998

본 연구에서는 한국인'의 정서 연구에 적합한 시각자극의 표준화를 위해서 한국정서사진체계(Korean Affects Picture System: KAPS)의 제작을 수행하면서 얻어진 결과를 간략히 보고하고자 한다. 총 210개의 시각자극 사진을 선정하여 슬라이드로 제작하고, 충남대학교 남녀 대학생 442명 (20-25세)을 대상으로 의미변별척도와 기본정서 평정척도를 사용하여 주관적 정서반응을 측정하였다 의미변별척도 평정치의 요인분석 결과 18개의 양극성 형용사는 3개의, 정서차원, 즉 즐거움, 각성도, 지배성 차원으로 구분되었다. 이는 국제정서사진체계 (IAPS)의 시각자극을 사용하여 미국인을 대상으로 수행한 연구 결과 및 한국인을 대상으로 수행한 연구 결과와 잘 일치하고 있다. KAPS에 포함되는 시각자각 수는 연구가 계속됨에 파라 지속적으로 확대되며, 실험방법 및 각자의 사진에 대한 세 차원(즐거움, 각성도, 통제력) 및 비연속 기본 정서(기쁨. 공포, 슬픔, 혐오, 놀람, 분노)에 관한 주관적 평정치를 포함하는 manual을 제작하여 정서연구자들에게 제공한다. 다른 연구자들에 의해서 얻어진 평정치 자료들도 계속해서 추가 보완될 것이다. 이를 통해서, 안으로 우리 나라에서의 정서 연구방법의 표준화 및 인구성과의 공유화를 위한 토대를 만들 수 있을 것으로 기대한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.2
• /
• pp.107-115
• /
• 2003

Nondestructive testing was carried out in order to evaluate the structural integrity and construction quality of the slurry wall of the underground LNG storage tank. 9 test points were selected, and the wall thickness, rebar spacing, and compressive strength of the slurry wall were evaluated by stress wave impact-resonance method, GPR, sonic velocity, and rebound testing, respectively. As results, the wall thickness, rebar sparing and estimated compressive strength satisfy the design criteria.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.50-60
• /
• 1998

This paper is concerned with the design of two residual control charts for real-time monitoring of the continuous flow processes. Two different control charts are designed under the situation that observations are correlated each other. Kalman-Filter based model estimation is employed when the process model is known. A black-box approach, based on Back-Propagation Neural Network, is also applied for the design of control chart when there is no prior information of process model. Performance of the designed control charts and traditional control charts is evaluated. Average run length(ARL) is adopted as a criterion for comparison. Experimental results show that the designed control chart using the Neural Network's modeling has shorter ARL than that of the other control charts when process mean is shifted. This means that the designed control chart detects the out-of-control state of the process faster than the others. The designed control chart using the Kalman-Filter based model estimation also has better performance than traditional control chart when process is out-of-control state.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.235-242
• /
• 1998

This study aims to detect and to reduce the multipath errors which are main errors source in high precious surveying such as GPS-aided aerial triangulation and Car Navigation. which reference receivers being fixed, when kinematic receivers move continuously, multipath is performed using smoothed code measurement and pure code measurement in the network. Through this methods, 3D RMS errors are reduced into about 30% in the single differential code solution to the kinematic receiver. This is based on the fact that the network adjustment are performed at multiple reference receivers, but positioning is carried out by the single differential methods between a reference receiver and a kinematic receiver. So it was supposed that this methods reduced the correlation errors including the atmospheric errors using the nearest receivers and can be mixed with another methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2093-2099
• /
• 2011

Speech signal and car noise signal such as muffler noise are segregated from the one which has both signals mixed using statistical method. To classify speech signal from the other in segregated signals, FFT coefficients were obtained for all segments of a signal where each segment consists of 128 elements of a signal. For several coefficients of FFT corresponding to the low frequencies of a signal, autocovariances are calculated between coefficients of same order of all segments of a signal. Then they were averaged over autocovariances. Linear equation was eatablished for the those autocovariances using the linear regression method for each siganl. The coefficient of the slope of the line gives reference to compare and decide what the speech signal is. It is what this paper proposes. The results show it is very useful.

• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.257-262
• /
• 2001

A Littman type tunable external-cavity diode laser system was developed. The laser output which is the Oth-order diffracted beam from a diffraction grating in an external cavity is a single longitudinal mode. Its FWHM was measured as less than 9 MHz. With the diode driving current of 140 mA and operating temperature of $25^{\circ}C$, the coarse tuning range of 3.475 urn was measured. A fine tuning experiment in which an external mirror was rotated by a PZT driven by a sawtooth wave was performed, and its tuning range of 0.042 urn was measured. sured.

• The Journal of the Korea Contents Association
• /
• v.10 no.1
• /
• pp.181-191
• /
• 2010

The number of subscribers of Broad & TV, Qook TV and My LG TV has been growing rapidly. It has been achieved at 1.7 million on August 2009. This study will focus on the viewing pattern of IP-VOD subscribers. For this research, we have interviewed 34 VOD users. According to the analyse, the VOD users prefer to watch free TV's programs, particularly variety programs, during 2 or 3 hours per view and 2 or 3 times a week. They use in general VOD service alone unlike the traditional TV viewers. Furthermore, There were single viewers who have used more than 8 hours continuously on weekend.

• Geophysics and Geophysical Exploration
• /
• v.5 no.1
• /
• pp.6-17
• /
• 2002

Refraction tomography was developed to interpret subsurface velocity structure easily in topographic conditions. It was applied to synthetic refraction data to find the factors for optimization of applicability of refraction tomography such as configuration of profiling and its length, spacing of geophones and sources and topographic conditions. Also, low velocity layer near VSP hole could be detected by joint inversion with refraction and VSP data. Continuity of subsurface velocity structure in two different spread lines for area of house land development was good in case of applying our algorithm and velocity structure was classified quantitatively to evaluate rippability for engineering works.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.186-192
• /
• 1998

This paper presents a high performance low switching PWM technique or the propulsion system of railway such as subway and high speed train. In order to achieve the continuous voltage control to six-step and s low harmonics with low switching frequency under 500Hz, the synchronous technique is combined with a space vector overmodulation and implemented by using DSP. Improved performance and a validation of proposed method are showed by the digital simulation and the experimental results using a 1.65MVA IGBT VVVF inverter and inertia load equivalent to 160 tons railway cars.