• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.1
• /
• pp.41-51
• /
• 2007

Differential equations and their solutions were formulated to describe the deflection of the tapered, nonuniform thickness and width's temple, clamped at one end while the perpendicular force is acting on the other end which is freely suspended. The model was derived based on laws of continuity at every point inside the elastic medium that the deflection, tangent slope, bending moment, shearing force must be continuous within the medium. The model is found to be in good agreement with measurements on the beta titanium temple with the correlation 0.992 and p=0.999(Chi test). Therefore it is possible to predict the effect of various temple parameters such as elastic modulus, thickness, width on the deflection of the temples being considered.

• Journal of Korea Water Resources Association
• /
• v.53 no.1
• /
• pp.29-43
• /
• 2020

The purpose of this study is to propose the design criteria and detailed design model by reviewing the issues related to geometry, formation process, destruction process, hydraulic function, restoration and ecological function of the step-pool from the existing research results, to apply the step-pool sequences to river restoration. Based on the analysis and review results, the design criteria for the structure and size of the step-pool are presented as ratio of the step spacing and the channel width, ratio of the unit step slope and channel slope, and ratio of step height and the particle size. To ensure structural stability of the step, stability analysis method of overturning based on the keystone theory was proposed as a design criterion. As a detailed design concept, a layout model was proposed by applying the imbricating structure of keystones and arch stones to the planar, longitudinal and transverse configurations of the step-pool.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.6
• /
• pp.409-413
• /
• 2013

In this paper, we device stress-diffusion full coupling multiscale analysis method for battery electrode simulation. In proposed method, the diffusive and mechanical properties of electrode material depend on Li concentration are estimated using density function theory(DFT) simulation. Then, stress-diffusion full coupling continuum formulation based on finite element method(FEM) is constructed with the diffusive and mechanical properties calculated from DFT simulation. Finally, silicon nanowire anode charge and discharge simulations are performed using the proposed method. Through numerical examples, the stress-diffusion full coupling method shows more resonable results than previous one way continuum analysis.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.12
• /
• pp.5-14
• /
• 2019

Recently in Korea, researches on seismic analyses for high-rise buildings in a large city have been increasing because earthquakes have occurred. However, the ground conditions are not included in most of seismic researches and analyses on a high-rise building. Also the influence of the predominant period of a seismic wave is not considered in reality. Therefore, in this study, the influence of the predominant period of a seismic wave on the dynamic behavior of high-rise buildings was analyzed based on the complete system model which can consider the grounds. For this purpose, 2D dynamic analyses based on a linear time history analysis were performed using MIDAS GTS NX, a finite-element based program. Dynamic behavior was analyzed in terms of horizontal displacements, drift ratios, bending stresses, and building weak zones. As a result, in overall, the dynamic response of a high-rise building become bigger as the predominant period of a seismic wave become longer. It was also found that the predominant period had a greater influence than other parameters, ground conditions and peak ground acceleration.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.365-368
• /
• 1998

본 연구는 음소 단위의 CHMM(Continuous Hidden Markov Model)을 이용한 Voice Dialing System을 위한 연속 음성인식에 관한 내용이다. 연구실 환경에서 음성으로 전화를 걸기 위하여 전국 지역명과 연속 숫자음 인식을 수행하였다. ETRI 445 데이터를 사용하여 초기의 모델은 ML(Maximum Likelihood) 추정법을 이용하여 작성하였고 적응화를 위해 최대 사후 확률 추정법을 사용하였다. 음성으로 다이얼링을 수행하기 위하여 문맥자유문법을 이용하여 제한적이나마 대화체문장으로 수행할 수 있도록 하였다. 그리하여 숫자음에 대하여 5인의 화자에 대하여 4연속 숫자음에 대하여 96%의 인식률을 보이고 있으며 7연속 숫자음에 대하여도 약 91%의 결과를 보여주고 있다. 문장으로도 음성 다이얼링을 수행하였을 경우 문장내에 단어와 숫자음에 대하여 약 80%의 인식률을 보였다.

• Computational Structural Engineering
• /
• v.8 no.3
• /
• pp.75-78
• /
• 1995

The boundary element analysis has been attempted for investigating the singular stress at the interface edge of infinitely layered structure. The subdomain technique has been employed and the analysis model has been divided into two subdomains, which are respectively homogeneous elastic zones. The boundary element equation has been formulated using the equilibrium and continuity conditions at the common interface. The numerical results of example problem has been presented.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.1
• /
• pp.37-47
• /
• 2007

The shield tunneling method has been increasingly employed to minimize environmental damages and civil complaints in the populated and developed area. A lining segment, which is a main structure of the shield tunnel, consists of joints. Conventional foreign and domestic design data have been commonly used for design practices without a specific verification of structural analysis models, design load, and the effect of soil characteristics on the performance of lining segment. In this study, the suitability of existing analytic models used for the design of shield tunnel lining segment has been evaluated through a comparison between analytical and numerical solutions. Based on the evaluation of their suitability performed in the study, a full-circumferential beam jointed spring model (1R-S0) is proposed for design practices by considering user's convenience, the applicability of field conditions and the accuracy of analysis result. By using the proposed model, the parameter analysis was performed to investigate the effects of joint stiffness, ground rigidity, joint distribution and the number of joints on the behavior of lining segment. Parameters considered in the investigation have been appeared to affect the behavior of lining segment. Among those parameters, joint stiffness has been appeared to have the most significant effect on the bending moment and displacement of lining segment.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.619-621
• /
• 2005

햅틱 장치를 이용한 변형체의 실시간 시뮬레이션은 가상현실을 구축하기 위한 중요한 기술의 하나로서 최근에 크게 각광받고 있다. 본 연구에서는 햅틱 장비와 변형체의 정확한 인터페이스를 구축하기 위하여 변형체의 물리적 특성을 고려한 연속체적 모델인 유한요소법을 통한 선행해석을 수행한다. 변형체와 햅틱 장치의 상호작용 과정에서 발생하는 변형과 반력을 사용자에게 실시간으로 제공하기 위하여 선행해석 결과를 이용한 변형체의 정적 시뮬레이션을 구현한다. 이와 함께 햅틱 장치와 접촉이 이루어지는 부분의 변형을 보다 자연스럽게 표현하기 위하여 적응적 유한요소법인 s-adaptive 방법을 적용하였으며 햅틱 장치와 접촉이 끝난 후의 변형체가 평형 상태로 돌아가는 과정을 모사하기 위하여 Newmark scheme을 통한 동적 시뮬레이션을 구현한다. 또한 최적화 행렬 연산 함수인 BLAS와 LAPACK을 이용하여 행렬 연산을 빠르게 수행하고 효율적인 메모리 사용 추구한다.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.1000-1005
• /
• 2007

본 논문에서는 실물체의 3차원 모델을 복원하기 위해 거리영상 카메라에서 획득된 3차원 점군에 대한 온라인 정합 기법을 제안한다. 제안하는 방법은 거리영상 카메라를 사용하여 연속된 거리영상과 사진영상을 획득하고 문턱값(threshold)을 이용하여 물체와 배경에 대한 정보를 분류한다. 거리영상에서 특징점을 선택하고 특징점에 해당하는 거리영상의 3차원 점군을 이용하여 투영 기반 정합을 실시한다. 초기정합이 종료되면 사진영상간의 대응점을 추적하여 거리영상을 정제하는 과정을 거치는데 대응점 추적에 사용되는 KLT(Kanade-Lucas-Tomasi) 추적기를 수정하여 초기정합의 결과를 대응점 탐색에 이용함으로써 탐색의 속도와 성공률을 증가시켰다. 특징점과 추적된 대응점에 해당하는 3차원 점군을 이용하여 거리영상의 정제를 수행하고 정합이 완료되면 오프라인에서 3차원 모델을 합성하였다. 제안한 알고리듬을 적용하여 2개의 실물체에 대하여 실험을 수행하고 3차원 모델을 생성하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.287-292
• /
• 2007

In general, the response of bulk material is independent of its size when it comes to considering classical elasticity theory. Because the surface to bulk ratio of the large solids is very small, the influence of surface can be negligible. But the surface effect plays important role as the surface to bulk ratio becomes larger, that is, the contribution of the surface effect must be considered in nano-size elements such as thin film or beam structure. Molecular dynamics computation has been a conventional way to analyze these ultra-thin structures but this method is limited to simulate on the order of $10^6{\sim}10^9$ atoms for a few nanoseconds, and besides, very time consuming. Analysis of structures in submicro to micro range(thin-film, wire etc.) is difficult with classical molecular dynamics due to the restriction of computing resources and time. Therefore, in this paper, the continuum-based method is considered to simulate the overall physical and mechanical properties of the structures in nano-scale, especially, for the thin-film.