• Land and Housing Review
• /
• v.7 no.3
• /
• pp.131-136
• /
• 2016

The aim of this study was to improve the performance of hybrid energy harvesting block merge the vibrations and the pressure developed in the previous study. The power generation performance of the energy block improved in this manner was measured and compared with the energy performance of the products previously developed. In previous models, the center has placed a piezoelectric, the two sides had arranged a vibration applying electromagnetic inducing type. Improved model was disposed three in a row of three unit modules for one block. We change the design in the following way. That is, a unit module has been placed the upper piezoelectric body, the lower portion were arranged three electron donation. In laboratory conditions, the power generation performance evaluation results of the improved energy block is as follows. Once when the vibration, power generation was determined to 1.066W. When compared with previous studies, and power generation performance is improved up to 235%. When the vibration in a row 5, power generation was determined to 1.830W. When compared with previous studies, the performance is improved to 177%. The purpose of developing a hybrid energy block is intended to produce electricity by the pressure and vibration when a vehicle passes through the energy block installed in the car park the mouth portion. Electricity produced will try to take advantage of for the purpose of operating a guiding beacon and LED signage in the parking lot entrance. Therefore, it is determined that there is a need in the experiment to compare the performance of the power generation in the field.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.273-273
• /
• 2011

현재 사용되고 있는 플로팅 게이트를 이용한 플래시 메모리 소자는 비례축소에 의해 발생하는 단 채널 효과, 펀치스루 효과 및 소자간 커플링 현상과 같은 문제로 소자의 크기를 줄이는데 한계가 있다. 이러한 문제를 해결하기 위하여 silicon nitride와 같은 절연체를 전자의 트랩층으로 사용하는 charge trap flash (CTF) 메모리 소자에 대한 연구가 활발히 진행되고 있다. CTF 메모리 소자의 전기적 특성에 대한 연구는 활발히 진행 되었지만, 수치 해석 모델을 사용하여 메모리 소자의 전하수송 메커니즘을 분석한 연구는 매우 적다. 본 연구에서는 수치 해석 모델을 적용하여 개발한 시뮬레이터를 사용하여 CTF 메모리 소자의 프로그램 동작 시 전하수송 메커니즘에 대한 연구를 하였다. 시뮬레이터에 사용된 모델은 연속방정식, 포아송 방정식과 Shockley-Read-Hall 재결합 모델을 수치해석적 방법으로 계산하였다. 또한 CTF 소자 프로그램 동작 시 트랩 층으로 주입되는 전자의 양은 Wentzel-Kramers-Brillouin 근사 법을 이용하여 계산하였다. 트랩 층에 트랩 되었던 전자의 방출 모델은 이온화 과정을 사용하였다. 게이트와 트랩 층 사이의 터널링은 Fowler-Nordheim (FN) tunneling 모델, Direct tunneling 모델, Modified FN tunneling 모델을 적용하였다. FN tunneling 만을 적용했을때 보다 세가지 모델을 적용했을 때가 더 실험치와의 오차가 적었다. 그 이유는 시뮬레이션 결과를 통해 인가된 전계에 의해 Bottom Oxide 층의 에너지 밴드 구조가 변화하여 세가지 tunneling 모델의 구역이 발생하는 것을 확인 할 수 있었다. 계산된 결과의 전류-전압 곡선을 통해 CTF 메모리 소자의 프로그램 동작 특성을 관찰하였다. 트랩 층의 전도대역과 트랩 층 내부에 분포하는 전자의 양을 시간에 따라 계산하여 트랩 밀도가 시간이 지남에 따라 일정 값에 수렴하고 많은 전하가 트랩 될 수록 전하 주입이 줄어듬을 관찰 하였다. 이와 같은 시뮬레이션 결과를 통해 CTF 메모리의 트랩층에서 전하의 이동에 대해 더 많이 이해하여 CTF 소자가 가진 문제점 해결에 도움을 줄 것이다.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.3
• /
• pp.495-508
• /
• 2005

Moving objects are spatiotemporal data that change their location or shape continuously over time. Their location coordinates are periodically measured and stored i3l the application systems. The linear function is mainly used to estimate the location information that is not in the system at the query time point. However, a new method is needed to improve uncertainties of the location representation, because the location estimation by linear function induces the estimation error. This paper proposes an application method of the cubic spline interpolation in order to reduce deviation of the location estimation by linear function. First, we define location information of the moving object on the two-dimensional space. Next, we apply the cubic spline interpolation to location estimation of the proposed data model and describe algorithm of the estimation operation. Finally, the precision of this estimation operation model is experimented. The experimentation comes out more accurate results than the method by linear function.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.65-73
• /
• 1987

An efficient plate bending finite element has been developed using higher-order inplane displacement profiles of the plate. The 6-noded, 21-d.o.f. triangular element including shear deformation effect has been derived from the plate-like continuum by the Galerkin's weighted residual method. Square plate examples were tested with selected element meshes and several aspect ratios for their static behavior under uniformly distributed load. The result of the example tests indicated consistently good performance of the present higher-order plate bending element in comparison with the thin and thick plate solution and other existing finite element solutions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.12 s.243
• /
• pp.1586-1596
• /
• 2005

In this paper, a structural damage identification method (SDIM) is developed to identify the line crack-like directional damages generated within a cylindrical shell. First, the equations of motion for a damaged cylindrical shell are derived. Based on a theory of continuum damage mechanics, a small material volume containing a directional damage is represented by the effective orthotropic elastic stiffness, which is dependent of the size and the orientation of the damage with respect to the global coordinates. The present SDIM is then derived from the frequency response function (FRF) directly solved from the equations of motion of a damaged shell. In contrast with most existing SDIMs which require the modal parameters measured in both intact and damaged states, the present SDIM may require only the FRF-data measured at damaged state. By virtue of utilizing FRF-data, one may choose as many sets of excitation frequency and FRF measurement point as needed to acquire a sufficient number of equations for damage identification analysis. The numerically simulated damage identification tests are conducted to study the feasibility of the present SDIM.

• Computational Structural Engineering
• /
• v.9 no.4
• /
• pp.127-134
• /
• 1996

This paper is about a progressive fracture analysis of concrete by boundary element method. From both displacement boundary integral equation and traction boundary integral equation of solids with cracks, a boundary integral equation for crack problem is derived. For the analysis of progressive fracture of concrete, fracture process zone is modelled based on Dugdale-Barenblatt model with linear tension-softening curve. By using the boundary element modeling, the progressive fractures of concrete beam and compact-tension specimens with various loading conditions are analyzed and compared with experiments. The analysis results show that the technique in this paper can predict the maximum strength and the nonlinear behavior of concrete including post-peak behavior.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.5
• /
• pp.587-597
• /
• 2001

The structural system that discreterized continuous shells is frequently used to make dome-type structures and these structures show the unstable phenomena by snap-through or bifurcation when a load level reaches certain critical value. The characteristic structural behaviour of a cable dome shows a strong nonlinearity and very sensitive according to the initial imperfection. In this study the shape finding problem by applying initial tension stress is investigated and using this the unstable phenomena of perfectly shaped and initially imperfected shape model by external forces are examined to grasp the unstable behavior of cable dome using the Geiger-type model.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.5
• /
• pp.538-546
• /
• 2008

In this paper, the constitutive equation is developed to analyze the characteristics of strain-induced plasticity in the range of low temperature of 316 stainless steel. The practical usefulness of the developed equations is evaluated by the comparison between experimental and numerical results. For 316 stainless steel, constitutive equations, which represent the characteristics of nonlinear material behavior under the cryogenic temperature environment, are developed using the Bodner's plasticity model. In order to predict the material behaviour such as damage accumulation, Bodner-Chan's damage model is implemented to the developed constitutive equations. Based on the developed constitutive equations, 3-D finite element analysis program is developed, and verified using experimental results.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.3
• /
• pp.201-209
• /
• 1984

In order to examine the effect of initial spray condition on the spray combustion mode and flame characteristics, theoretical analysis was carried out to predict combustion mode and flame structure for various initial distribution of droplets in spray. A system of conservation equations of spray flame in two dimensional axisymmetric for two phase flow was solved by a discrete element method for n-Butylbenzen (C$_{10}$ $H_{14}$). As a results of present study, there are two principal group combustion modes that may occur independently for various initial group combustion numbers in a spray burner. These group combustion modes are termed as an external and internal group combustion mode. The critical group combustion number between the internal and external group combustion mode and the flame characteristics of those flame are also predicted. These results may be used as a basic data in the designing of new combustors as well as proper operating conditions for spray burners.s.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.4
• /
• pp.413-419
• /
• 2011

The nano-size hoenycomb structures have the higher ratio of the surface to the volume than macro-size honeycomb structures, and they can maximize the functionality of the electrical and chemical catalyst. The mechanical behaviors of the nano-sized structures are different from ones of the macro-size structure, and it is caused by the surface effect. This surface effect can be investigated by the atomistic simulation; however, the prediction of mechanical behaviors of the nano-sized honeycombs are practically impossible due to excessive computational resources and computation time. In this paper, by combining the bridging method considering the surface stress elasticity model with homogenization method, the mechanical behaviors of the nano-sized honeycombs are predicted efficiently.