• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4D
• /
• pp.555-561
• /
• 2009

In lieu of section profile data, a fitting of the bored tunnel shape is more significant confirmation for maintenance of a tunnel. Before the permit on the completion of a tunnel, deformation of the completed tunnel with respect to the design model are considered. And deformation can be produced at continuously along the entire of the tunnel section. This study firstly includes an analysis of algebraic approach and test it with an observed field data. And then a number of methods, line search method, genetic algorithm, and pattern search methods, are compared with the 3D tunnel shape fitting. Algebraic methods can solve a simple circular cylinder type as like a railway tunnel. However, a more complex model (compound circular curve and non circular) as like a highway tunnel has to be solved with soft computing tools in the cause of conditional constraints. The genetic algorithm and pattern search methods are computationally more intensive, but they are more flexible at a complex condition. The line search method is fastest, but it needs a narrow bounds of the initial values.

• Computational Structural Engineering
• /
• v.6 no.4
• /
• pp.57-66
• /
• 1993

The p-version crack model based on integrals of Legendre polynomial and virtual crack extension method is proposed with its potential for application to stress intensity factor computations in linear elastic fracture mechanics. The main advantage of this model is that the data preparation effort is minimal because only a small number of elements are used and high accuracy and the rapid convergence can be achieved in the vicinity of crack tip. There are two important findings from this study. Firstly, the limit value, the strain energy of the exact solution, can be estimated with successive three p-version approximations by ascertaining that the approximations enter the asymptotic range. Secondly, the rate of convergence of p-version model is almost twice that of h-version model on the basis of uniform or quasiuniform mesh refinement for the cracked panel problem subjected to tension.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.185-193
• /
• 1997

The order of the stress singularity that occurs at the termination of an interface between materials exhibiting bilinear stress-strain response under plane strain conditions has been calculated, The governing equation of elasticity together with traction-free boundary condition and interface continuity condition defines a two-point boundary value problem. The stress components near the free edge are assumed to be proportional to r/sup s-1/, with solutions existing only for certain values of s. Finding these values entails the solution of an eigenvalue problem. Because it has been impossible to integrate the differential equations analytically, the integration has been performed numerically with a shooting method coupled with a Newton improvement scheme.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.2
• /
• pp.29-38
• /
• 1982

Nonlinear hydrological model containing the nonlinearity of effective rainfall, lag time and runoff is presented. In the evaluation of rainfall excess, the polynomial fitting method for total rainfall, 5 day antecedant rainfall and direct runoff is developed. In the application to actual watershed, the estimated model parameters of nonlinear lag model reflecting the nonlinearity of lag time are compared with the parameters, by both the fitting method and the correlation, model which are the modified version of the storage function model. The Successive Approximation Method in mathematical solution and Newton-Rhapson method in numerical solution are found to be superior to the conventional numerical graphic method in the analysis of nonlinear processes.

• KSBB Journal
• /
• v.9 no.5
• /
• pp.525-531
• /
• 1994

Tyrosinase has two types of enzymatic activities, cresolase catalyzing the hydroxylation of monophenol and catecholase catalyzing the oxidation of o-phenol. Gradual inactivation of the enzyme during the reaction is a barrier to be overcome for the commercial application of the enzyme. Tyrosinase was stabilized by modifying the lysine residue of the enzyme using glutaraldehyde. In addition to that, tyrosinase was also stabilized by adapting the continuous reactor system. In packed bed reactor quinone could be easily removed, so the stability of tyrosinase increased. Borate buffer retarded the reaction rate of catechol to quinone and consequently decreased the tyroslnase inactivation. Tyrosinase immobilizer on controlled pore glass showed significantly enhanced stability in a packed-bed reactor.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.145-156
• /
• 1993

An improved analysis model for material nonlinearity induced by elasto-plastic deformation and damage including large strain response was proposed. The elasto-plastic-damage constitutive model based on the continuum damage mechanics approach was adopted to overcome limitations of the conventional plastic theory, which can manage the anisotropic tonsorial damages evolved during time-independent plastic deformation process of materials. Updated Lagrangian finite element formulation for elasto-plastic damage coupling problem including large deformation, large rotation and large strain problems was completed to develop a numerical model which can predict all kinds of structural nonlinearities and damage rationally. Finally, a finite element analysis code for the 2-dimensional plane problem was developed and the applicability and validity of the numerical model was investigated through some numerial examples. Calculations showed reasonable results in both geometrical nonlinear problem due to large deformation and material nonlinearity including the damage effect.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.483-487
• /
• 2010

하천에서 물이 비교적 빠른 속도로 흘러가면 압력 변동, 하상의 조도, 하천내 구조물 등의 영향에 의해 수면이 끊임없이 변형을 일으키며 수면에 작은 물결(수면 파문)이 생긴다. 이러한 수면 파문은 유수에 의해 유수의 평균 유속으로 이류되며, 이 때문에 인간이 유수의 흐름을 시각적으로 인식할 수 있다. 이러한 표면 파문은 적절한 영상 분석을 하면 표면 유속 측정의 추적자로 이용할 수 있다. 본 연구는 유수 표면을 연속된 영상을 촬영하고, 일련의 영상을 시공간 영상(space-time image)으로 만든 뒤, 휘도 경사법(graylevel gradient method)으로 유속 벡터를 추출하는 새로운 방법을 제시하였다. 이 분석 과정은 기존의 입자 영상 유속계(PIV, Particle Image Velocimetry) 기법을 이용하는 방법보다 훨씬 간단하고 분석 시간도 크게 절약할 수 있다. 또한, 수면 파문의 전파에 따른 중력파의 영향을 시공간 영상의 처리 과정에서 잡음으로 간주하여 처리할 수 있다는 장점을 가지고 있다. 개발된 루틴을 표면 영상 유속계(SIV, Surface Image Velocimtery)에 구현하여 새로운 영상 유속계를 개발하였다. 시공간 영상 분속을 이용하는 새로운 영상 유속계를 실험실 수로의 영상 자료에 적용하여 그 정확도, 적용성, 장단점 등을 분석하였다. 제안된 방법에 의한 평균류 산정 결과는 물리적으로 타당하며, 저속 또는 저휘도에서의 분석 성능이 뛰어난 것으로 밝혀졌다. 다만, 이방향 흐름의 분석에서는 문제가 있는 것이 밝혀졌다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.1
• /
• pp.119-127
• /
• 1999

In this paper, a robust direct adaptive contrdler is presented in a linear time-invariant. Continuous systems with unmodeded dynamics and bounded disturbance using a rmdified control law and the adaptive law to Compensate for the drawback of ${\sigma}$-modification algorithm. The proposed algorithm is awlied to a plant with unrmdeled dynamics represented as a singular perturbation. Boundness of all signals in overall system is guaranteed with mathematical analysis. simulation results are presented the effectiveness foc the first-order plant even in the presence of unmodelled dynamics or bounded disturbance simulatneousIy.eousIy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.451-457
• /
• 2009

Most of objects in computer graphics may be represented by a form of mesh. The exact computation of vertex normal vectors is essential for user to apply a variety of geometric operations to the mesh and get more realistic rendering results. Most of the previous algorithms used a weight which resembles a local geometric property of a vertex of a mesh such as the interior angle, the area, and so on. In this paper, we propose an efficient algorithm for computing the normal vector of a vertex in meshes. Our method uses the conformal mapping which resembles synthetically the local geometric properties, and the mean value coordinates which may smoothly represent a relationship with the adjacent vertices. It may be confirmed by experiment that the normal vector of our algorithm is more exact than that of the previous methods.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.119-125
• /
• 2018

The particle based computational fluid dynamics (CFD) method, which follow Lagrangian approach for fluid dynamics, fluid particle behavior by tracking all particle calculation physical quantities of each particle. According to basic concept of particle based CFD method, it is difficult to satisfy continuum theory and measure influences from neighboring particle. Article number density and weight function were used to solve aforementioned issue. Difficulties continuum mean simulate non-continuum particles such as solid including granular and sand. In this regard, the particle based CFD method modified solid particle problems by replacing viscous and surface tension forces friction and drag forces. In this paper, particle interaction model for solid particle friction model implemented to simulate solid particle problems. The broken dam problem, which is common to verify particle based CFD method, used fluid or solid particles. The angle of repose was observed in the simulation results the solid particle not fluid particle.