• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.61-66
• /
• 1999

반복 응력 상태 아래서 알루미나 세라믹의 피로 표면손상 누적현상이 분석되었다. 연속 미끄럼 접촉 시에 발생하는 응력 상태를 재현하기 위해서 동시에 작용하는 수직-수평 반복 압축하중 기법이 사용되었다. 알루미나 구와 평판의 접촉면에서 알루미나 미세 결정의 피로 파손에 의한 마모 입자 형성 기구가 관찰되었고, 반복하중의 횟수와 수직-수평 하중비가 커질수록 마모량은 증가하였다. 반복 접촉하중에 의한 표면손상 누적이 접촉 수직 변위 측정으로 정량화 되었다. 두 접촉 구조물의 강성 (하중-변위 선도의 기울기) 변화가 두 재질의 탄성계수의 변화로 표현되었다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.17-19
• /
• 2002

자외선 조사경화는 자외선조사에 의해 올리고머 등을 광중합/광가교하여 경화시키거나 섬유고분자의 표면을 처리하여 표면성질을 변화시키는 것으로 이를 이용한 섬유의 염색가공은 환경친화성, 에너지 절감, 높은 연속 생산속도, 고 해상도의 패턴 부여가능, 입체적인 구조물의 처리 가능, 장비의 소형화 및 설비면적의 감소 등 우수한 장점을 가지고 있어 차세대 첨단 염색가공기술로서 그 중요성이 부각되고 있다. [l] (중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.39-44
• /
• 1994

본 문에서는 조화기진력(harmonic force) 하에서 보조변수법을 적용한 연속법이 사용되어 선형구조물의 변위, 응력에 대한 치수 설계 민감도가 계산되었다. 또한 최적설계가 조화 하중의 경우에 시도되어 주어진 제한조건들을 만족하며 최소 중량이 계산되었다.

• Journal of KSNVE
• /
• v.5 no.1
• /
• pp.11-20
• /
• 1995

본 글에서는 건물 및 교량의 면진/제진 기술의 연구개발과 실용화 현황에 대하여 전반적으로 살펴보았다. 현재 면진/제진 기술의 연구는 매우 활발하게 진행 되고 있으며 여기서 그 전체를 서술하기는 어렵다. 고량의 면진/제진 기술은 새로운 내진기술로서 금후 고량의 다경간 연속화, 장경간화, 고교가화, 엄격한 용지조건 에서의 고량건설에 중요해질 것으로 생각된다. 현재 제진구조 시스템은 안전한 거주 셩의 관점으로부터 중소지진 및 강풍 등에 대한 외란대책으로서 실용화 기술이 진행 되고 있다. 실무적인 관점으로부터 주로 구동장치의 개발이 중심이 되고 있으며 이것에 의하여 제진구조 시스템의 성능이 결정된다고 해도 과언이 아니다.

• Proceedings of the KSEG Conference
• /
• 2004.03a
• /
• pp.11001-11050
• /
• 2004

불연속면 또는 단열은 암반 내의 역학적 분리면을 통칭하는 것으로서 암반 내의 작은 흠집이나 물리적으로 불균질한 곳이나 불연속면 주위에 응력이 집중되어 초래되는 변형의 결과이다. 불연속면은 정압, 지체구조적, 그리고 열적 응력 및 높은 수압에 반응하여 형성되며, 아주 미세한 것부터 대륙 규모에 걸쳐 다양한 크기로 발달한다. 불연속면은 연속체로서의 암반을 물리적으로 분리시키기 때문에 그 자체로서 역학적인 약대에 해당되고, 지하수의 유동 통로의 기능도 하기 때문에 지질공학, 지반공학 및 수리지질학 실무에서 매우 중요한 요소로 작용한다. 경제적으로 중요한 석유, 지열 및 수자원 저류체 역시 단열 암반 내에 형성된다. 불연속면은 오염물질의 이동과 분산을 제어할 뿐만 아니라 암반을 기초로 하거나 대상으로 하는 공학적 구조물과 굴착의 안정성에도 역시 영향을 미친다. (중략)

• Journal of the Korea Concrete Institute
• /
• v.25 no.4
• /
• pp.429-438
• /
• 2013

An object oriented numerical analysis program of axial-flexural elements and the step-by-step method (SSM) has been developed to analyze concrete long-term behaviors of structures constrained internally and externally. The results of the numerical analysis for simple and continuous prestressed (PS) concrete box and composite girders, pre-cast slab of continuous steel composite girder, and simple preflex composite girder show that the adjusting coefficient decreases by increasing constraint. The loss rates of pre-tension force were not sensitive but those of pre-compression force were increased rapidly by decreasing adjusting coefficient. This indicates that the design based on the loss rate of pre-tension can over-estimate the pre-compression force in a concrete section constrained internally and externally. The adjusting coefficients which satisfy results of the numerical analysis are 0.35~0.95, and it can be used as an index of constraint of concrete long-term deformation. The adjusting coefficient 0.5 of Bridge Design Specifications can under-estimate residual stress of PS concrete slab, and the coefficient 0.7 or 0.8 of LRFD Bridge Designing Specifications can under-estimate the loss rates of continuous PS concrete girders. The adjusting coefficient of hybrid structures should be less then 0.4.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.29-42
• /
• 1999

The SASW (Spectral-Analysis-of-Surface-Waves) method, which evaluates the stiffness structure of the subsurface and structures nonintrusively and nondestructively, has been successfully used in the civil engineering applications. However, the SASW method assumes that the subsurface or structures consist of horizontal multi-layers, so that the method has some difficulty in continuously evaluating the integrity of a tunnel lining and a pavement system. This difficulty prevents the SASW method from being used to generate a tomographic image of stiffness for the subsurface or structures. Recently, the GPR technique which has the advantage of continuously evaluating integrity of the subsurface and structures has been popular. This advantage of GPR technique initiated the efforts to make the SASW method, which is superior to GPR and other nondestructive testing methods due to its capability of evaluating stiffness and modulus, be able to do continuous evaluation of stiffness structure, and the efforts finally lead to the development of \ulcornerTomographic SASW Technique.\ulcorner Tomographic SASW technique is a variation of the SASW method, and can generate a tomographic image of stiffness structure along the measurement line. The tomographic SASW technique was applied to the investigation of lateral variability of a sand box placed by the raining method for the purpose of verifying its effectiveness. Tomographic SASW measurements on the sand box revealed that the investigated sand box has different shear stiffness along the measurement line, which gave a clue of how to make a better raining device.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.914-921
• /
• 2010

When industrial structures are constructed on soft ground, ground subsidence is occurred by problems of bearing capacity. To protect ground subsidence have to improve soft ground, and have to predict settlement estimation for reasonable construction. Artificial Neural Networks(ANN) is adopted for prediction of settlement of construction during the initial design. In the study, Artificial Neural Networks are applied to predict the settlement estimation of initial condition ground and ground improved by D.C.M method. Also, this study compares results of Artificial Neural Networks and results of continuum analysis using Mohr-Coulomb models. In result, settlements of initial condition ground decreased over 0.7 times. Also, by comparing ANN and continuum analysis, coefficient of determination was comparatively high value 0.79. Thought this study, it was confirmed that settlements of improvement ground is predicted using laboratory experiment data.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.1
• /
• pp.127-134
• /
• 2010

The dynamic instability for snapping phenomena has been studied by many researchers. Few paper deal with the dynamic bucking under the load with periodic characteristics, and the behavior under periodic excitation is expected the different behavior against STEP excitation. We investigate the fundamental mechanisms of dynamic instability when shallow EP(Elliptic Paraboliodal) shell of two degree of freedom are subjected to sinusoidal excitation with direct snapping and indirect snapping. By using Newmark-$\beta$ method, we can get the nonlinear response, and characteristics of the dynamic instability through the running response spectrum by FFT(fast Fourier Transform) and attractors are compared in the phase plane. Dynamic buckling loads are strongly influenced by the relationships between the natural frequency of structures and the dominant frequency of incident excitations.

• Composites Research
• /
• v.16 no.6
• /
• pp.16-22
• /
• 2003

This paper studied the AE(acoustic emission) characteristics of the laminated composite structures. The composite stiffened panels under the compressive loading emitted various AE signals when they buckled or changed the buckling modes. In addition, the failure initiated and propagation generated a lot of complex signals. From the continuous signal generation. we identified when the failures initiated and whether they propagated or not. The single lap joint of laminated plates under tensional load also generated AE signals when bonding region failed. The first failure occurrence and its propagation are monitored by generated AE signals. The characteristics of AE signals used in this analysis are cumulative hits, hit distribution, peak frequency of generated AE waveform and amplitude of signals. The analysis of AE signals shows that continuous increment of cumulative hits can be regarded as damage propagation and three dominant peak frequencies can correspond to typical failure modes in the laminated composites.