• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.142-148
• /
• 2018

To improve the performance of a launch vehicle, kerosene, a launch vehicle fuel, undergoes a densification process. Liquid nitrogen injection cooling is an effective densification method which has a simple system and is inexpensive. During the cooling process, however, nitrogen may dissolve in the kerosene, possibly resulting in changes to fuel properties. Therefore, it is essential to measure and eliminate the amount of dissolved nitrogen in the kerosene. In this study, the vacuum extraction principle is introduced to measure the content of dissolved nitrogen in the kerosene. In addition, the experimental results, which used a designed/manufactured nitrogen sampling device, are described. From the results, the validity of the nitrogen sampling device and the dissolved nitrogen measurement/elimination methods was demonstrated.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1045-1050
• /
• 2014

$N_2O$(Nitrous Oxide) is known as the third major GHG(Green House Gas) following $CO_2$(Carbon Oxide) and $CH_4$(Methane). The GWP(Global Warming Potential) factor of $N_2O$ is 310 times as large as that of $CO_2$ because $N_2O$ in the atmosphere is very stable, and it becomes a source of secondary contamination after photo-degradation in the stratosphere. Investigation on the cause of the $N_2O$ formation have been continuously reported by several researchers on power sources with continuous combustion form, such as a boiler. However, in the diesel engine, research on $N_2O$ generation which has effected from fuel components has not been conducted. Therefore, in this research, author has investigated about $N_2O$ emission rates which was changed by nitrogen and sulfur concentration in fuel on the diesel engine. The test engine was a 4-stroke direct injection diesel engine with maximum output of 12 kW at 2600rpm, and operating condition of that was set up at a 75% load. Nitrogen and sulfur concentrations in fuel were raised by using six additives : nitrogen additives were Pyridine, Indole, Quinoline, Pyrrol and Propionitrile and sulfur additive was Di-tert-butyl-disulfide. In conclusion, diesel fuels containing nitrogen elements less than 0.5% did not affect $N_2O$ emissions in the all concentrations and kinds of the additive agent in the fuel. However, increasing of the sulfur additive in fuel increased $N_2O$ emission in exhaust gas.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.2
• /
• pp.75-83
• /
• 2014

The present study estimated nitrogen budget of South Korea including nitrogen oxides (NOx) in 2011. Emission sources of NOx were calculated with the higher contributors, such as vehicles, businesses, power plants, based on the IPCC and EPA reports. Moreover, nitrogen budget was separated for city, agriculture livestock and forest. Input and output were chemical fertilizer, crop uptake, fixation, irrigation, compost, leaching, volatilization, imported food, denitrification, runoff, and so on. Annual nitrogen input were 1,692,650 ton/yr and output were 837,739 ton/yr which were increased from 2010 budget. In 2011, NOx emissions by vehicles, power plants, and businesses were 308,207 ton/yr, 601,437 ton/yr, and 469,946 ton/yr, respectively. Including nitrogen oxide, total nitrogen input and output in 2011 was calculated as 5,652,366 ton/yr and 1,425,371 ton/yr, respectively.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.293-294
• /
• 2000

실내 이산화질소의 주요 오염원으로는 취사 및 보조난방기구 등의 연료 연소와 실외의 이산화질소가 환기 및 공기의 흐름에 의한 실내로 유입되는 경우를 들 수 있다. 이산화질소는 부식성이 있는 강한 산화 가스로써 대기중에 존재하면 숨이 막히고 자극적인 코를 찌르는 냄새를 유발한다. 일반적으로 호흡에 의해 이산화질소 노출농도의 80∼90%가 체내로 흡수될 수 있으며, 많은 연구에서 2ppm 이상의 이산화질소 농도가 건강한 성인의 폐기능을 약화시키거나 상당히 변화시킬 수 있다고 밝혀졌다(WHO, 1987). (중략)

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.139.2-139.2
• /
• 2011

산업혁명 이후 계속된 산업화로 이산화탄소, 메탄, 이산화질소와 같은 온실가스의 대기 중 농도가 지속적으로 증가하고 있다. 세계 각국은 화석연료 고갈 및 기후변화에 대처하기 위해 대체연료에 대한 연구가 활성화되고 있는데 특히, 폐유 재생과 폐기물의 발생 및 처리 문제를 극복하기 위해 많은 노력을 기울이고 있다. 본 시험은 폐유를 정제한 정제연료유와 유화정제연료유의 물성을 석유제품인 중유와 비교 분석하였다. 유화정제연료유는 폐유 중 중금속, 회분 및 슬러지 등을 제거한 후 유화제 등을 넣어 생산된 제품으로 연구를 수행하였다. 본 논문은 이에 대한 전반적인 내용을 언급하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.3
• /
• pp.207-214
• /
• 2009

Crossover of nitrogen from cathode to anode is inevitable in typical membranes used in PEM fuel cells. This crossovered nitrogen normally accumulates in the hydrogen recirculation system at anode side channels. Excessive buildup of nitrogen in the anode side lowers the relative hydrogen concentration and finally affects the performance of fuel cell stack. So it is very important to analysis the nitrogen gas crossover at various operating conditions. In this study, characterization of nitrogen gas crossover in PEM fuel cell stack was investigated. The mass spectroscopy (MS) has been applied to measure the amount of the crossovered nitrogen gas at the anode exit. Results show that nitrogen gas crossover rate was affected by current density, anode and cathode stoichiometric ratio and operating pressure. Current density, anode stoichiometric ratio and anode operating pressure do not affect nitrogen crossover rate but anode exit concentration of nitrogen. Cathode pressure and stoichiometric ratio largely affect the nitrogen crossover rate.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2227-2230
• /
• 2008

Crossover of nitrogen from cathode to anode is inevitable in typical membranes used in PEM fuel cells. This crossovered nitrogen accumulates in anode recirculation system and excessive buildup of nitrogen in the recirculating anode gas lowers the hydrogen concentration and finally affects the performance of fuel cell stacks. In this study, characterization of nitrogen gas crossover was investigated in PEM fuel cell stacks. The mass spectroscopy (MS) has been applied to measure the amount of the crossovered nitrogen at the exit of anode. Results show that anode and cathode stoichiometric number ($SR_c$) have a big effect of nitrogen crossover.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.11a
• /
• pp.41-45
• /
• 1999

연소 중에 발생하는 주요 공해물질 중의 하나가 질소산화물(NOx)이며 석탄의 연소에서는 타 연료를 사용하는 연소와 비교하여 많은 양의 질소산화물이 생성된다. 이러한 현상은 석탄에 결합되어있는 연료 중 질소(fuel-N)의 산화에 기인한 것이다. 석탄 연소 시 fuel-N에 의하여 생성되는 질소산화물은 전체 질소산화물의 75%이상, 때에 따라서는 95%까지 점하는 결과를 보여 준다.(중략)

• Journal of the Korean Institute of Gas
• /
• v.4 no.2 s.10
• /
• pp.20-26
• /
• 2000

In this experimental study, we examined gas engine characteristics of a small high-speed engine in various ways. And we studied performance of natural gas, hydrogen gas and gasoline fuel engines, as emission characteristics and process of combustion. For the purpose of preventing back-fire occurred in case of high-speed and high load in hydrogen engine, we controlled air quantity by installing throttle valve in gas fuel engine. We performed experiment by mixing nitrogen to hydrogen fuel. As a result, we could find out characteristics which of a high speed small engine by applying gas fuels.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.4
• /
• pp.1022-1032
• /
• 1990

본 연구에서는 기체연료 연소시 산소부화연소의 적용에 대한 연구를 시작하는 단계에서 상용 프로판을 산소부화연소 시킴으로써 첨가된 산소에 의한 반응시간의 단 축과 공급 공기량중의 질소량 저감에 희한 연소가스중의 NO농도를 측정하고, 이에 따 른 화염장의 온도 및 연소가스중의 $O_{2}$ 및 N$_{2}$농도를 측정하여 그들의 상관관 계를 가지고 NO의 배출특성을 고찰함으로써 기체연료의 산소부화연소에 따른 효율적인 에너지 이용을 위한 연소장치개발과 오염물질 저감대책에 기초자료를 제공하는데 그 목적이 있다.