• Journal of Auto-vehicle Safety Association
• /
• v.13 no.4
• /
• pp.92-98
• /
• 2021

Recently hydrogen fuel cell buses have been deployed for the public transportations. In order to introduce buses fueled by hydrogen successfully, the research results of hydrogen bus safety should be discussed and investigated significantly. Especially, Korean government drives research in terms of various applications of hydrogen energy to replace the conventional fuel energy resources and to improve the safety evaluation. Thus it is necessary to examine vehicle crashworthiness under side impact loadings. This study was focused on the simulation result evaluation of full bus model and simplified bus model with hydrogen fuel tank module and mounting system located below floor structure due to the significance of bus side impact accidents. The finite element models of hydrogen bus, fuel tank system and side impact moving barrier were set up and simulation results reported model performance and result comparison of two side impact models. Computational results and research discussion showed the conceptual side impact framework to evaluate hydrogen bus crashworthiness.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.104-107
• /
• 2005

This survey was conducted to know the post-harvest bulk treatment system for barley, The tendency of barley-bulk treatment in 4 RPC was gradually increased up to 4,458 ton in 2001, but after that time, the amounts was decreased 1,0731on in 2003. There was the big difference on the circulated and the continued systems that was the kinds of drying system they use. The barleys, the harvest and the conveyance method was different on RPCs. Naked barley was only treated, and $90\%$ barley was harvested by the consignment in J RPC, otherwise unhulled barley was treated, and there did not used the consignment in S RPC. Small and mulit combine was used to harvest, and the ratio of bulk was up to $90\%$ in J RPC, but small combine was only used and ratio of bulk was at most $5\%$ in S RPC. It was sell by 1kg in polished and 40kg unpolished barley around year in J RPC, but it was sell by bulk to september in S RPC.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.363-367
• /
• 2005

Latching valves are operated like solenoid valves by open/close command and they maintain final open or close commend without electric power source, so they are widely used in propulsion system of satellite and launch vehicle requiring reliability and being subject of restriction of power. This paper present design and test procedure of latching valve using permanent magnet polarized solenoid, which is developed for 45N Hydrazine propulsion system, to estimate feasibility of design and manufacture of latching valve.

• Membrane Journal
• /
• v.30 no.2
• /
• pp.79-96
• /
• 2020

Secondary energy conversion systems have been briskly developed owing to environmental issue and problems of fossil fuel. They are basically operated based on electro-chemical systems. In addition, ion exchange membranes are one of the significant factors to determine performance in their systems. Therefore, the ion exchange membranes in suitable conditions must be developed to improve the performance for the electro-chemical systems. These ion exchange membranes can be classified into various types such as cation exchange membrane, anion exchange membrane and bipolar membrane. Their membranes have distinct characteristics according to the chemical, physical and morphological structure. In this review, the types of ion exchange membranes and their fabrication processes are described with main characteristics. Moreover, applications of ion exchange membranes in newly developed energy conversion systems such as reverse electrodialysis, redox flow battery and water electrolysis process are described including their roles and requirements.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.4
• /
• pp.287-297
• /
• 2014

For several decades, many countries operating nuclear power plants have been studying the various disposal alternatives to dispose of the spent nuclear fuel or high-level radioactive waste safely. In this paper, as a direct disposal of spent nuclear fuels for deep geological disposal concept, the rod consolidation from spent fuel assembly for the disposal efficiency was considered and analyzed. To do this, a concept of spent fuel rod consolidation was described and the related concepts of disposal canister and disposal system were reviewed. With these concepts, several thermal analyses were carried out to determine whether the most important requirement of the temperature limit for a buffer material was satisfiedin designing an engineered barrier of a deep geological disposal system. Based on the results of thermal analyses, the deposition hole distance, disposal tunnel spacing and heat release area of a disposal canister were reviewed. And the unit disposal areas for each case were calculated and the disposal efficiencies were evaluated. This evaluation showed that the rod consolidation of spent nuclear fuel had no advantages in terms of disposal efficiency. In addition, the cooling time of spent nuclear fuels from nuclear power plant were reviewed. It showed that the disposal efficiency for the consolidated spent fuel rods could be improved in the case that cooling time was 70 years or more. But, the integrity of fuels and other conditions due to the longer term storage before disposal should be analyzed.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.451
• /
• pp.22-31
• /
• 2014

온실가스 다량 배출로 인한 지구온난화 현상은 많은 분야에서의 변화를 요구하고 있다. 특히 온실가스 배출의 주원인으로 꼽히고 있는 발전 등 에너지산업 분야의 경우 그 요구는 매우 거세다. 과거에는 경제성장이라는 측면만 고려하면 됐지만, 지금은 기후변화 대응을 위해 환경을 최우선적으로 고려할 것을 주문하고 있기 때문이다. 문제는 현재 전 세계적으로 약 20%에 이르는 인구가 전기 에너지를 사용하지 못하고 있다는 점이다. 즉 향후 에너지를 사용하고자 하는 신규 소비자는 더욱 늘 것이고, 산업의 발전으로 인한 에너지 소비 역시 큰 폭으로 증가할 수밖에 없다. 문제가 굉장히 어렵지만 해결책도 분명 존재한다. 결론적으로 말해 온실가스 배출을 최소화하면서도 에너지 효율은 높인 기술을 개발하면 되는 것이다. 그리고 이미 세계 각국은 청정에너지 기술개발을 위해 다각도의 노력을 펼치고 있는 상황이다. 그렇다면 세계 각국은 미래 에너지시장을 선도할 청정에너지 기술로 어떤 것을 꼽고 있을까. 이 질문에 대한 대답은 지난 5월 서울에서 개최된 '제5차 클린에너지장관회의(CEM, Clean Energy Ministerial)'에서 제시된 바 있다. CEM은 한국, 미국, 영국, 독일, 중국, 일본 등 세계 에너지의 70%를 사용하는 주요 국가의 관계 장관들이 모여 클린에너지 공급 확대와 에너지효율 향상을 위한 구체적 액션플랜을 논의하는 자리다. 2010년 미국에서 첫 회의가 열렸고 아랍에미리트, 영국, 인도에 이어 한국은 5번째로 CEM을 개최했다. 특히 이번 CEM에서는 회원국들의 의견을 모아 10대 청정에너지 혁신기술을 최초로 선정, 발표했다. CEM은 "향후 10년 간 에너지 시장의 변화를 선도할 유망 기술을 선정한 것으로 IEA 등 국제기구와 주요국 기술 로드맵을 기준으로 해 23개 회원국 회람을 거쳐 최종 확정하게 됐다"고 배경을 설명했다. 이번에 선정된 10대 청정에너지 혁신기술은 ${\triangle}$초고압직류송전 ${\triangle}$에너지저장장치 ${\triangle}$바이오연료 ${\triangle}$마이크로 그리드 ${\triangle}$탄소포집 및 저장 ${\triangle}$초고효율 태양광 발전 ${\triangle}$해상풍력 ${\triangle}$신재생에너지 하이브리드시스템 ${\triangle}$빅데이터 에너지관리시스템 ${\triangle}$지열 시스템이다. 이와 관련해 산업통상자원부 윤상직 장관은 "이번에 선정된 10개의 기술은 최근의 기술적 정책적 추세가 잘 반영된 결과"라고 평가했다. 특히 윤 장관은 "중앙집중형 공급원에서 분산형 전원으로의 변화, 에너지 효율향상의 중요성, ICT와 융 복합 추세 등 우리나라의 상황에서 시사하는 바가 크다"며 "현재 수립하고 있는 '제3차 국가에너지기술 개발계획'에 이러한 기술적 추세를 반영하겠다"는 의사를 표명했다. 향후 10년 간 에너지시장의 변화를 선도할 10대 청정에너지 유망기술을 자세히 소개한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.187-192
• /
• 2019

Hybrid power storage system with emergency power function for demand management and power outage minimizes the investment cost in the building of buildings and factories requiring emergency power generation facilities, We propose a new business model by developing technology that can secure economical efficiency by reducing power cost at all times. Normally, system power is supplied to load through STS (Static Transfer Switch), and PCS is connected to system in parallel to perform demand management. In order to efficiently operate the electric power through demand forecasting, the EMS issues a charge / discharge command to the ESS as a PMS (Power Management System), and the PMS transmits the command to the PCS controller to operate the system. During the power outage, the STS is rapidly disengaged from the system, and the PCS becomes an independent power supply and can supply constant voltage / constant frequency power to the load side. Therefore, it is possible to secure reliability through verification of actual system linkage and independent operation performance of hybrid ESS, By enabling low-carbon green growth technology to operate in conjunction with an efficient grid, it is possible to improve irregular power quality and contribute to peak load by generating renewable energy through ESS linkage. In addition, the ESS is replacing the frequency follow-up reserve, which is currently under the charge of coal-fired power generation, and thus it is anticipated that the operation cost of the LNG generator with high fuel cost can be reduced.

• Environmental and Resource Economics Review
• /
• v.23 no.4
• /
• pp.583-615
• /
• 2014

Including the rolling black out in 2011, Korea has suffered from rapid increase of electricity consumption and demand forecasting failure for last five years. In addition, because of the Fukushima disaster, high fuel prices, and introduction of new generation sources such as renewables, the uncertainty on a power supply strategy increases. Consequently, a stable power supply becomes the new agenda and a revisino of strategy for new power generation sources is needed. In the light of this, we appraises the sixth basic plan for long term electricity demand and supply considering the changes of foreign and domestic conditions. We also simulate a strategy for the new power generation sources using a portfolio analysis method. As results, a diversity of power generation sources will increase and the share of renewable power generation will be surged on the assumptions of a cost reduction of renewable power sources and an increase of fuel costs. Particularly, on the range of a risk level(standard deviation) from 0.06 and 0.09, the efficient frontier has the most various power sources. Besides, the existing power plan is not efficient so that an improvement is needed. Lastly, the development of an electricity storage system and energy management system is necessary to make a stable and efficient power supply condition.

• Membrane Journal
• /
• v.26 no.6
• /
• pp.432-448
• /
• 2016

In the last decade, various types of energy harvesting and conversion systems based on ion exchange membranes (IEMs) have been developed for eco-friendly power generation and energy-grid systems. In these membrane-based energy systems, high ion selectivity and conductivity properties of IEMs are critical parameters to improve efficiency of the systems such as proton exchange membrane fuel cells, anion exchange membrane fuel cells, redox flow batteries, water electrodialysis for hydrogen production, and reverse electrodialysis. This article suggests variable approaches to overcome trade-off limitation of polymeric membrane ion transport properties by reviewing various types of composite ion-exchange membranes including novel inorganic-organic nanocomposite membrane, surface modified membranes, cross-linked and pore-filled membranes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1225-1234
• /
• 2013

According to the importance of greenhouse gas emissions, it grows day by day, the goverment is promoting to prepare the specific policy implementation to enhance building energy-saving design standars as the development agenda. In this study, the statistical analysis was performed by Descriptive statistics, Regression analysis, and Hypothesis testing to collect to generate and storage energy usage data in real time to settle parameter setting to affect energy consumption under energy-guzzling apartment not single building. This study is expected to be utilized as the basis for the optimum energy-saving design of the future of the building or facility energy costs rise and the demand for energy-efficient and stable management.