• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.181-187
• /
• 2008

Recently, alternative fuels are drawing more attentions due to the increasing need for lower emission characteristics and fuel consumption rate in automotive engines. The GTL(gas to luquid) is the one of most favored candidates. It has higher cetane number(more than 75) and almost negligible sulphur and aromatic contents. Therefore, enhanced emission characteristics are expected even in the application in diesel engines without any modification. In this study, the cylinder pressure and heat release, emission characteristics with fuel injection timings are compared between diesel and GTL fuel in the single cylinder diesel engine. Noticeable reduction in PM, THC and CO emission are observed due to lower sulphur and aromatic contents in GTL. Also, the ignition delay decreased due to higher cetane number of GTL, which slightly decreased the amount of NOx emissions. With the retards of main injection timing, NOx decreases more for the case of GTL, while the level of THC and CO emissions still remains lower than the case of diesel. Therefore, there is much room for the control of injection timing for NOx reduction without sacrificing THC and CO emissions. With the retards of main injection timing, Small size distribution of PM became lager and there amount increased. But from all conditions, size distribution of PM for the case GTL was lower than Diesel.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.29-34
• /
• 2009

Recently, we have a lot interest in a sudden rise of oil prices and a change weather for the earth warmming, so, development of new alternative fuels need in order to spare fossil fuel and reduce exhaust emissions for air pollution prevention. Biodiesel, which can be generated from natural renewable sources such as new or used vegetable oils or animal fats, may be used as fuel in diesel engine of compression ignition engine. In this paper, the combustion characteristics between neat diesel oil and biodiesel blends(10 vol.% biodiesel and 20 vol.% biodiesel) were tested using four stroke, direct injection diesel engine, especially this biodiesel was produced from soybean oil at our laboratory. This analysis showed that cylinder pressures, the rate of pressure rises and the rate of heat releases were decreased as the blending ratios of biodiesel to diesel oil increased because of lower heating value of biodiesel in spite of increased oxygen content in biodiesel.

• Journal of Astronomy and Space Sciences
• /
• 제12권1호
• /
• pp.112-122
• /
• 1995

1995년 7월에 발사될 무궁화호 통신위성이 원지점 모터 분사의 오차로 인해 예정된 지구정지궤도진입에 실패했을 경우를 가정하였다. 원지점 모터 분사시에 연료 저장 상태의 불균형, 추력축의 회전 등으로 인하여 원지점 모터 분사가 잘못되어, 통신위생이 정지 궤도 요소 충 궤도 경사각이 $0^{\circ}$가 아닌 지구 통주기 궤도를 도는 상황을 모의실험하였다. 이 때, 궤도 의 진화과정을 섭통론을 통해 분석하였고 이심율과 경사각의 변화를 조사하였다. 궤도 경사각이 $0^{\circ}$가 아닌 지구동주기 궤도를 도는 통신위성이 8자 궤적을 그리게 되면 빔 지향점도 위성의 이동에 따라 움직이는데 이 문제를 해결하기 위해 위성의 roll각을 조정하여 빔 지향점을 고정시킬 수 있는 알고리즘을 무궁화호에 적용시켰다. 그리고 승교정과 강교점을 통과할 때 일어나는 펀파면의 회전 현상도 통신 효율에 큰 영향을 주는데, 편파변의 회전 현상을 줄일 수 있는 yaw각 조정방법올 역시 무궁화호에 적용했다.

• 수산해양기술연구
• /
• 제22권1호
• /
• pp.41-48
• /
• 1986

Ifis recommended that the injection rate should be accurate and reliable in the input data of the performance simulation in diesel engine. Matsuoka Sin improved W. Bosch's injection ratio measurement system. Matsuoka Sin reduced length of the test pipe and set the orifice. However, it was not measured accurately to measure the injection ratio due to reflection wave. In the present thesis, the improved measurement system with combination of the conventional W. Bosch type injection ratio measurement system and Matsuoka Sin type corrected W. Bosch type was practically made. The location of orifice and throttle valve was modified and set one more back pressure valve in order to reduce the effect of reflection wave. The results according to injection condition of multi-hole nozzle are following: 1. Measurement error of injection ratio measurement system in this thesis was $\pm$ 1 %, therefore, its reliability was good. 2. The form of injetion ratio is changed from trapezoidal shape to triangle shape with increase of revolution per minute when injection amount is constant. 3. In the case of constant rpm, the initial injection ratio is almost constant regardless of the amount, meanwhile the injection period becomes longer with increase of the amount. 4. The injection pressure of nozzle isn't largely influenced with injection ratio in the case of constant injection amount and rpm, otherwise the initial injection amount is increased by 3-4% when the injection pressure is low. 5. The injection ratio isn't nearly influenced with back pressure.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권1호
• /
• pp.8-12
• /
• 2015

비에스테르화 바이오 디젤유는 에스테르화 공정을 거치지 않기 때문에 공정에 드는 비용이 절감되며 경유에 5%로 혼합하여 전자제어 분사식 디젤엔진에 사용할 경우 에스테르화 바이오 디젤유보다 경유에 더 유사한 성능을 나타내었다. 이러한 연구를 바탕으로 경유에 5% 혼합된 비에스테르화 바이오 디젤유를 전자제어 분사식 디젤엔진에 적용하기 위해서는 성능 최적화가 필요하다. 본 연구에서는 비에스테르화 바이오 디젤유의 성능 최적화를 위한 기초 실험으로 연료소비율, 질소산화물 및 도시평균유효압력을 반응치로 정하고 제어 가능한 6가지 인자에 대해서 그 영향력을 평가하고자 부분요인배치법을 이용하여 25%와 50%의 부분 부하에서 실험을 수행하였다. 그 결과 6가지 인자 중 분사시기 및 커먼레일압력이 가장 큰 영향을 미쳤고 각 부하에서 영향의 크기는 다르게 나타났다.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.4729-4735
• /
• 2014

적극적인 환경보호를 위해 그동안 상대적으로 소홀하였던 오프로드 엔진에 대한 배기가스 배출 규제가 강화되고 있다. 본 연구에서는 NOx와 PM 배출물 특성을 고려하여 오프로드 디젤 엔진의 강건 설계를 수행하였다. 이를 위하여 실험계획법에 따라 배출물 NOx와 PM의 측정 실험을 수행하고 다구찌 기법으로 망소 SN 비를 산출하고 분산 분석을 수행하였다. NOx와 PM 배출량에 영향을 미치는 제어 인잘로 인젝터 홀 수, 연료 분사 시기, EGR 율을 선택하였으며 각 제어 인자에 대하여 2 또는 3 수준을 고려하여 직교 배열표를 작성하였고, 이에 근거하여 실험을 수행하였다. 망소 SN 비를 산출하고 델타 통계량을 계산하였다. 저부하 운전 조건에서는 분사 시기가 NOx 배출량에 가장 큰 영향을 미치며, EGR 율이 PM 배출량에 가장 큰 영향을 미치는 결과를 얻었다. 제어 인자들에 대한 신뢰수준은 90% 이상이었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권4호
• /
• pp.60-77
• /
• 1992

The effects of exhaust gas recirculation(EGR) on the characteristics of exhaust emissions and specific fuel consumption have been investigated using an eight-cylinder, four cycle, direct injection diesel engine operating at several loads and speeds. The experiments in this study are conducted on the fixed fuel injection timing of $38^{\circ}$ BTDC regardless of experimental conditions. In conclusion, it is found that $NO_{x}$ emission is markedly reduced with the drop of burnt gas temperature at high speeds and loads especially as the EGR rate increases, while the soot particulate rises with EGR rate and load at a given engine speed, especially high loads. The reduction of exhaust emissions within the Korea heavy duty diesel engine emission standards can be roughly achieved by the optimal EGR rate without degarding the specific fuel consumption, based on the correlations between exhaust emissions.

• 한국분무공학회지
• /
• 제16권2호
• /
• pp.97-103
• /
• 2011

The electronically controlled diesel engine was converted to dual fuel engine system. Test engine was set up for investigating the power output, thermal efficiency and emissions. ND 13-mode tests were employed for the engine test cycle. The emission result of dual fuel mode meets Euro-4 (K2006) regulation and the engine performance of dual fuel engine was comparable to the performance of diesel engine. To estimate economical efficiency, test vehicles have been operated on a certain driving route repeatedly. Fuel economy, maximum driving distance per refueling and driveability were examined on the road including free ways. Developed vehicle can be operated over 500 km with dual fuel mode and shows 80% of diesel substitution ratio. Driveability of dual fuel mode is similar with that of diesel mode.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.397-404
• /
• 1994

Smoke is emitted in diesel engines because fuel injected into the high-temperatured and high-pressured combustion chamber burns with its mixture with insufficient oxygeny. In consideration of air pollution, above all, it is necessary to illuminate the cause of smoke emission in diesel engines. The smoke emission, which is characteristic of diffusion combustion in diesel engines, results from pyrolysis of fuel not mixed with air. Therefore the smoke emission is dependent on diffusion combustion quantity, which is in turn controlled by engine parameter. The study aims at making clear and interpreting the interdependence of smoke emission in diesel engines with heat released within combustion chamber, camparing diffusion combustion quantity according to each engine parameter (air fuel ratio, injection timing, and engine speed), and showing the relation between smoke emission and fraction of diffusion combustion through experiment.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.18-27
• /
• 2000

The spray models incorporated into the GTT code were tested for free spray, spray in swirling flows and the sprays impinging on a flat wall. And the validity of the models has been confirmed by comparing the calculated results with the experimental data. Using this code, the spray behavior in the diesel combustion chamber have been numerically analyzed for variation of nozzle diameter. Also, the effects of nozzle diameter in diesel combustion was investigated experimentally by measuring the performance in a D.I engine. This study provides the information for the spray characteristics and emissions with variation of nozzle diameter. As a result, it has shown that decreasing nozzle diameter resulted in improving smoke and specific fuel consumption in a middle speed range.