Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지
DOI QR코드

DOI QR Code

Selection of Factors for Performance Optimization on Non-esterified Bio-diesel Fuel Using Fractional Factorial Design

부분요인배치법을 이용한 비에스테르화 바이오 디젤유의 성능 최적화를 위한 인자 선정

  • Jung, Sukho (Department of Mechanical Systems Engineering, Pukyong National University) ;
  • Koh, Daekwon (Department of Mechanical Systems Engineering, Pukyong National University)
  • Received : 2014.09.30
  • Accepted : 2015.01.06
  • Published : 2015.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

Non-esterified bio-diesel fuel saves cost by no esterified process and its performance was more similar to diesel oil than esterified bio-diesel fuel when the fuel blended 95% diesel oil and 5% it was used on diesel engine with electronic control system. A performance optimization is necessary for application of non-esterified bio-diesel fuel blended with diesel oil 95% on the latest diesel engine. In this study, test using fractional factorial design was accomplished at 25% and 50% partial load in order to evaluate influence of controllable 6 factors on responses such as specific fuel consumption, nitrogen oxides and coefficiency of variation of indicated mean effective pressure as basic experiment for performance optimization of this fuel. It is cleared that the injection timing and common rail pressure of 6 factors are mainly effective and its effect level is different according to load.

비에스테르화 바이오 디젤유는 에스테르화 공정을 거치지 않기 때문에 공정에 드는 비용이 절감되며 경유에 5%로 혼합하여 전자제어 분사식 디젤엔진에 사용할 경우 에스테르화 바이오 디젤유보다 경유에 더 유사한 성능을 나타내었다. 이러한 연구를 바탕으로 경유에 5% 혼합된 비에스테르화 바이오 디젤유를 전자제어 분사식 디젤엔진에 적용하기 위해서는 성능 최적화가 필요하다. 본 연구에서는 비에스테르화 바이오 디젤유의 성능 최적화를 위한 기초 실험으로 연료소비율, 질소산화물 및 도시평균유효압력을 반응치로 정하고 제어 가능한 6가지 인자에 대해서 그 영향력을 평가하고자 부분요인배치법을 이용하여 25%와 50%의 부분 부하에서 실험을 수행하였다. 그 결과 6가지 인자 중 분사시기 및 커먼레일압력이 가장 큰 영향을 미쳤고 각 부하에서 영향의 크기는 다르게 나타났다.

Keywords

References

  1. Y. T. Oh, "A study on the usability of used vegetable oil as a diesel substitute in diesel engine," Transactions of the Korean Society of Mechanical Engineers B, vol. 22, no. 4, pp. 481-488, 1998 (in Korean). https://doi.org/10.22634/KSME-B.1998.22.4.481
  2. S. H. Jung, M. Ishida, S. Yamamoto, H. Ueki, and D. Sakaguchi, "Enhancement of NOx-PM trade-off in a diesel engine adopting bio-ethanol and EGR," International Journal of Automotive Technology, vol. 11, no. 5, pp. 611-616, 2010. https://doi.org/10.1007/s12239-010-0073-6
  3. S. D. Lee and S. H. Jung, "Comparison of combustion characteristics between esterified and non-esterified bio-diesel oil on CRDI diesel engine with turbocharger," Journal of the Korean Society of Marine Engineering, vol. 37, no. 1, pp. 53-58, 2013 (in Korean). https://doi.org/10.5916/jkosme.2013.37.1.53
  4. G. Daiko industry research, Trend of Technology Market in Bio Fuel and Friendly Environmental Vehicle, BIB, Seoul, p. 85, 2011 (in Korean).
  5. S. H. Jung, M. S. Kim, S. H. Jang, D. K. Koh, and S. K. Ahn, "Analysis of combustion characteristics of bio diesel fuel in a DI diesel engine using PXI and LabVIEW," Journal of the Korea Society for Power System Engineering, vol. 8, no. 2, pp. 18-23, 2004 (in Korean).
  6. M. S. Kim, H. C. Doh, D. K. Koh, and S. K. Ahn, "A study on droplet distribution of bio diesel fuels using immersion sampling method," Journal of the Korea Society for Power System Engineering, vol. 10, no. 4, pp. 5-10, 2006 (in Korean).
  7. S. D. Lee, K. H. Kim, H. S. Lee, and S. H. Jung, "Optimization of NOx emission with blends of bio-diesel oil and diesel fuel using design of experiments," Journal of the Korea Society for Power System Engineering, vol. 17, no. 6, pp. 150-156, 2013 (in Korean). https://doi.org/10.9726/kspse.2013.17.6.149
  8. M. Pandian, S. P. Sivapirakasam, and M. Udayakumar, "Investigation on the effect of injection system parameters on performance and emission characteristics of a twin cylinder compression ignition direct injection engine fuelled with pongamia biodiesel-diesel blend using response surface methodology," Journal of Applied Energy, vol. 88, pp. 2663-2676, 2011. https://doi.org/10.1016/j.apenergy.2011.01.069
  9. T. Ganapathy, K. Murugesan and R. P. Gakkhar, "Performance optimization of Jatropha biodiesel engine model using Taguchi approach," Journal of Applied Energy, vol. 86, pp. 2476-2486, 2009. https://doi.org/10.1016/j.apenergy.2009.02.008
  10. S. Saravanan, G. Nagarajan, and S. Sampath, "Multi response optimization of NOx emission of a stationary diesel engine," Journal of Fuel, vol. 89, pp. 3235-3240, 2010. https://doi.org/10.1016/j.fuel.2010.05.015
  11. D. Jeong, J. Bang, and K. Min, "A study on the optimization of operating variables in a diesel engine by design of experiments," Proceedings of the 30th KSAE established memorial Conference 08-S0048, pp. 292-297, 2008 (in Korean).
  12. R. Saidur, M. I. Jahirul, M. Hasanuzzaman, and H. H. Masjuki, "Analysis of exhaust emissions of natural gas engine by using response surface methodology," Journal of Applied Sciences, vol. 8, no. 19, pp. 3328-3339, 2008. https://doi.org/10.3923/jas.2008.3328.3339

Cited by

  1. Optimization of blending oil with non-esterified biodiesel fuel using design of experiment at partial engine loads vol.18, pp.1, 2017, https://doi.org/10.1007/s12239-017-0008-6
  2. Analysis on Application Plan of Factorial Design in Relation to Responses for Electronically-controlled Diesel Engine vol.22, pp.1, 2018, https://doi.org/10.9726/kspse.2018.22.1.005
  3. 부분부하에서 비에스테르화 바이오디젤 5% 혼합유의 성능최적화를 위한 실험계획법 적용에 관한 연구 vol.20, pp.2, 2015, https://doi.org/10.9726/kspse.2016.20.2.051