• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.381-386
• /
• 2015

Environmental pollution and alternative energy has attracted increasing interest. The use of diesel engines is expected to increase in the world owing to their fuel economy. The problem of air pollution emissions from marine engines is causing a major concern in many areas. An alternative fuel was introduced as an environmentally friendly fuel to reduce the toxic emissions from conventional fossil fuels. Biodiesel fuel, which is a renewable energy is highlighted as environmentally friendly energy. This energy can be operated in regular diesel engines when it is blended with invariable ratios without making changes. In this study, a bio-diesel fuel was produced from waste cooking oil and applied to a marine diesel engine to examine the effects on the characteristics of combustion. Waste cooking oil contains a high cetane number and viscosity component, a low carbon and oxygen content. As a result, the brake specific fuel consumption was increased, and the cylinder pressure, rate pressure rise and rate of heat release were decreased.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.1
• /
• pp.1-8
• /
• 2013

The water-in-fuel droplets were applied to investigate the effect of mixing ratio between water and decane, ambient temperature, droplet size and spacing between droplets on ignition and micro-explosion in a heated chamber with high temperature. The ignition temperature of droplet was found lower as the droplet size was increased and the contents of water was decreased. The life time of droplet, however, decreases as the contents of water increases due to the micro-explosion. The occurrence of micro-explosion also increases as the size of droplets and the ambient temperature increase. The flame spread speed gets faster as the contents of water and the number of suspender decreases.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.247-247
• /
• 2010

본 연구는 주류 제조과정에서 발생하는 생전분발효 부산물을 펠릿(pellet)연료로 전환하는 과정에서 효율적인 방법에 대해 기술한다. 술을 정제하는 과정에서 발생하는 주박을 펠릿화하고 재생청정에너지인 폐자원의 효율성을 높이기 위한 방법을 제안한다. 술을 정제하고 남은 지게미를 주박(酒粕, 술지게미)이라 하고 흔히 부드러운 것을 단단하게 뭉친 알갱이를 펠릿이라 한다. 현재 펠릿화는 폐목재를 분쇄후 성형, 가공하여 목재펠릿을 만들어 상용화하고 있다. 목재펠릿은 성형, 가공하는데 비용이 주박보다 많이 들고 열량도 더 낮음을 확인하였다. 목재소에서 나온 나무(톱밥)와 주박을 열량측정기를 이용하여 측정한 결과로 나무는 약 1850 Kcal이고 주박은 약 1989 Kcal가 측정되었다. 나무는 일반 목재소 세 곳에서 채취한 것이고 주박은 막걸리, 약주 및 청주의 술지게미를 실험에 사용한다. 주류업체에서도 술을 정제하고 남은 주박을 처리하는데 많은 곤란과 비용이 든다. 또한 주박을 해양에 투척하여 처리해 왔으나 2012년부터 해양투기가 금지되어 더욱 처리에 곤란을 겪게 된다. 최근 주박을 토양개량제(비료)로 개발하여 사용하기도 하나 본 연구에서 제안하는 장점은 농산물을 재배해서 주류제조시 발생되는 주박을 펠릿화하여 연료로 사용하고 남은 재를 토양개량제로 사용하는 장점이 있다. 제품의 전체 라이프 사이클을 통해 환경으로 방출되는 모든 것을 가능한 한 0(zero)으로 하는 활동인 제로-이미션(zero-emision)이 된다. 이는 단순히 배출량만을 줄이는 것이 아니라 폐기물을 유용한 자원으로 활용한다는 측면이 가장 큰 이점이 된다. 주박의 효율성을 높이기 위해 주박을 종류별로 주박과 목재를 섞는 방법으로 열량을 측정하였다. 먼저 열량이 높은 순서로 막걸리 주박과 약주 주박의 비율을 1:1, 1:0.5, 1:0.2, 두 번째 막걸리 주박과 청주 주박의 비율을 1:1, 1:0.5, 1:0.2, 세 번째 막걸리 주박과 나무 톱밥의 비율을 1:1, 1:0.5, 1:0.2로 섞어서 열량을 측정하였다. 열량이 높은 순서는 세 번째(2015Kcal), 두 번째(1995Kcal), 첫 번째(1868Kcal)의 순이었다. 가장 열량이 높은 막걸리 주박과 나무 톱밥을 섞은 것이 가장 효율성이 높다. 주박 펠릿의 장점은 친환경적인 소재이고 지속적으로 재생이 가능한 에너지원이다. 더욱이 주박 펠릿은 발열량이 높고 다른 바이오매스 원료에 비해 청정하다는 큰 장점을 지니고 있다. 또한 사용에 소요되는 유지 관리비용을 최소화할 수 있고 자동화가 가능하여 사용에 편리하다. 가격면에서 화석연료에 비해 안정적이고 체적 또한 작아 이송의 큰 장점을 가지고 있다. 현재 펠릿의 경우는 목재펠릿이 제품화되어 있지만 주박을 이용하여 제품의 펠릿화를 통한 연료원으로 사용하는 경우는 전 세계 전무한 상태로 폐자원을 재사용하는 효율성이 제시된다. 향후 과제로 주박을 이용한 펠릿 연료원의 기술이 개발되고 기계적인 시스템을 개발하면 저탄소 녹색성장 신재생에너지 연료의 획기적인 미래형 에너지시스템이 될 것이다.

• 사료
• /
• s.62
• /
• pp.54-57
• /
• 2013

차랑 등의 수송연료인 휘발유나 경유에 일정비율을 식물에서 뽑아낸 신재생연료 즉 바이오 연료를 혼합하여 공급하도록 의무화하여 온실가스 배출을 줄이기 위한 신재생연료 혼합의무제도(RFS) 국내 시행방안과 관련한 공청회가 지난 2월 15일 서울교육문화회관에서 지식경제부 주최와 한국석유관리원 주관으로 개최됐다. 정부는 2020년까지 경유나 휘발유에 바이오 디젤 에탄올을 4~5% 섞게 하여 동 기간까지 온실가스 감축목표량 중 8~10%까지 달성한다는 계획을 세워놓고 있다. 하지만 녹색연대 등 민간단체들은 온실가스 감축 효과는 매우 불확실하며 특히 어떤 원료를 쓰느냐에 따라 오히려 기후변화를 악화시킬 수 있다는 주장과 산림훼손, 세계 곡물가 상승, 국내 유가 상승 등 많은 문제점들이 있음을 우려해 강하게 반대를 표명하고 있는 입장이다. 우리 협회에서도 곡물을 이용한 에탄올의 혼합의무가 시행되는 경우 옥수수 등 사료원료가격의 상승으로 가뜩이나 어려운 축산업의 경영상황을 더욱 약화시키게 될 것이 예견되는 바, 동 혼합의무제도의 시행을 적극 반대하는 대 국회 및 정부활동을 전개한 바 있다. 그 결과 지난 4월 17일 국회 지식경제위원회 법률심사소위원회에서는 신재생연료 혼합의무제도의 시행 시기를 2년간 유보하고 혼합의무연료에서 에탄올을 제외시키는 방안을 논의한 바 있어 향후 입법과정에 관심이 모아지고 있다. 이에 따라 본지는 이번 RFS의 국내 시행과 관련하여 어떠한 문제점들이 있는지 관련 업계 종사자의 글을 통해 알아본다.

• Journal of Power System Engineering
• /
• v.12 no.2
• /
• pp.12-17
• /
• 2008

Biodiesel fuel(BDF) which is easily produced from vegetable oils such as soybean oil and rice bran oil can be effectively used as an alternative fuel in diesel engine. But biodiesel fuel can affect the performance and emissions in diesel engine because it has different chemical and physical properties from diesel fuel. To investigate the combustion characteristics of biodiesel fuel as an alternative fuel for D.I. diesel engine, the experiments were carried out at the three-cylinder, four stroke D.I. diesel engine with T/C. Experimental parameters adopted a conventional diesel fuel and a blend of biodiesel fuel derived from soybean. As a result of experiments in a test engine, BSFC with blend of BDF resulted in higher than with diesel fuel. The ignition delay decreased with blend of BDF than with diesel fuel.

• Journal of Power System Engineering
• /
• v.13 no.6
• /
• pp.51-56
• /
• 2009

Recently, lots of researchers have been attracted to develop various alternative fuels in diesel engine. The use of biodiesel fuel(BDF) is an effective way of substituting diesel fuel in the long run. But biodiesel fuel can affect the performance and emissions in diesel engine because it has different chemical and physical properties from diesel fuel. In this study, to investigate the combustion characteristics of biodiesel fuel as an alternative fuel for D.I. diesel engine, experiments were carried out at the three-cylinder, four stroke D.I. diesel engine with T/C. As a result, shorter ignition delays were observed for the biodiesel blend cases relative to the diesel oil. The pick value of premixed combustion for the rate of heat release is increased with decreasing C.F.W. temperature.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.2
• /
• pp.122-129
• /
• 1995

This is an experimental study on the chassis dynamometer and high way road testing during a severe winter and summer season. Results obtained to compare with the ultrasonic fuel feeding system and conventional fuel system in diesel automobile engine. The results were as followers in case of the ultrasonic fuel feeding system. 1. In chassis dynamometer testing during given vehicle speeds, output were increased from 4.6 to 11.43%, brake specific fuel consumption were increased from 6 to 19%, smoke were decreased from 16.7 to 50%. 2. The running fuel consumption ratio in high way road test were decreased by 15.3% at a severe summer and 20.2% at a severe winter.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.6
• /
• pp.50-56
• /
• 1994

This is an experimental study on the performance characteristics of Diesel Automobile with ultrasonic fuel feeding system. For this purpose, ultrasonic fuel feeding system was made and atomization characteristics was measured. Base on this result, carried out engine dynamometer test to investigate the performance characteristics of diesel automobile with ultrasonic fuel feeding system in comparison with conventional diesel fuel injector. The results are as follows. 1) In the spray characteristics test, fuel particle sizes were decreased about 11%~21%. 2) In engine dynamometer test, -The power was increased about 5%~11%. -The thermal efficiency was improved about 6%~11%. -The specific fuel consumption was improved about 6%~19%. -The smoke concentration was decreased about 11%~50%.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.7
• /
• pp.609-615
• /
• 2015

In this study, the combustion and exhaust emission characteristics in a gasoline direct injection engine with variations of the bio-ethanol-gasoline blending ratio and the excess air factor were investigated. To investigate the effects of the excess air factor and the bio-ethanol blends with gasoline, combustion characteristics such as the in-cylinder combustion pressure, rate of heat release (ROHR), and the fuel consumption rate were analyzed. The reduction of exhaust emissions such as carbon monoxide (CO), unburned hydrocarbon (HC), and nitrogen oxides ($NO_x$) were compared with those of gasoline fuel with various excess air factors. The results showed that the peak combustion pressure and ROHR of bio-ethanol blends were slightly higher and were increased as bio-ethanol blending ratio is increased. Brake specific fuel consumption increased for a higher bio-ethanol blending ratio. The exhaust emissions decreased as the bio-ethanol blending ratio increased under all experimental conditions. The exhaust emissions of bio-ethanol fuels were lower than those of gasoline.

• Journal of Energy Engineering
• /
• v.19 no.1
• /
• pp.25-31
• /
• 2010

In this experimental research, it was studied to compare with pure gasoline and the fuels of RM50 (reformulated methanol fuel) for performance and exhaust emissions without reconstruction of engine systems. RM50 has a wider range of combustion limitation, which is one of the methanol's characteristics. This causes a stable driving state of RM50 in the experimental condition of unstable state and a low cycle by cycle variation which is used to determine the driving state. It is determined that fuel stability is better because cycle by cycle variation varies within 10%, therefore, driving characteristics is relatively good. In all conditions, RM50 has lower exhaust emissions of CO, HC, NOx than gasoline fuel, however, RM50's noise characteristics are 0.5~2dB higher at all condition, and in the result of the experiments of rubber fusion, it increases the utility possibility of RM50.