• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.520-522
• /
• 2011

In this paper, the bearing strengths and fracture behaviors of the pin-jointed carbon fiber/epoxy composites were investigated through pin loading test. The composites were fabricated by a filament winding process, and two types of laminated patterns were considered. According to the results, type 1 pattern revealed a net-tension failure mode, whereas type 2 pattern exhibited a bearing failure mode. Also, acoustic emission energy of the type 2 pattern was higher than that of the type 1 pattern. Therefore, the type 2 pattern was found to be structurally safer than the type 1 pattern.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.175-180
• /
• 2020

In this study, we developed a micropattern technology in the shape of RFID TAG antenna using ultrasonic micropattern manufacturing system developed to enable micropattern technology. The ultrasonic tool horn in longitudinal vibration mode was installed in the micropattern manufacturing system to develop the ultrasonic press technology for the micropattern antenna shape of the RFID TAG antenna shape on the insulating sheet surface. The ultrasonic shaping technology was manufactured by applying the resonance design technique to a 60kHz tool horn, and by using the micropattern manufacturing system, the coil wire having a thickness of 25㎛ can be ultrasonically press-molded on an insulating sheet of 200㎛ or less. In ultrasonic press technology, the antenna shape having a minimum line width of 150㎛ could be molded without disconnection, peeling, or twisting of the coil wire.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.6
• /
• pp.814-820
• /
• 2008

Recently, researches on ontology-based pattern classification have been tried out in many fields. However, in most of the researches, the ontology which represents the knowledge about pattern classification is just referred during the processes of the pattern classification. In this paper, we propose ontology-based fuzzy classifier for pattern classification which is extended from the fuzzy rule-based classifier In order to realize the proposed classifier, we construct an ontology by conceptualizing the method of fuzzy rule-based pattern classification and generate ontology inference rules for pattern classification. Lastly, we show the validity o) the proposed classifier through the experiment of pattern classification on the Fisher's IRIS dataset.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.189-192
• /
• 2009

This paper presents comparison and analysis of various CFA patterns which are used in single sensor digital camera. There are several patterns which are already used, however, images are sometimes darker or brighter than what human see in real life. Also, images show some noise and blurring. To overcome this problems, many studies on the patterns have been discussed. We carry out experiment with seven patterns including the Bayer pattern. The bilinear method is selected for a interpolation method. The experimental result indicates that image quality is not affected by individual patterns and each pattern requires its own interpolation method.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.632-647
• /
• 2007

Lots of geographic phenomena have dynamic spatial patterns with time changes, and there have been lots of researches on exploring these dynamic spatial patterns. However, most of these researches focused on the static pattern analysis in a given period, rather than dealing with dynamic changes in the spatial pattern over time with the continual or cumulative perspective. For this reason, investigation of the inertia of spatial process in terms of temporal changes is needed. From this background, the purpose of this paper is to propose the methodology to explore the changes in spatial pattern cumulatively by considering the inertia of the spatial statistics over time, and to apply it to the case study That is, we introduce the new spatial statistic, and produce the z-values of the statistic using Monte Carlo Simulation, and then to explore the changes in spatial patterns over time cumulatively. To do this, the method to combine the J statistic with CUSUM statistic for exploring spatial patterns, and to apply it to the changes in the commercial landuse in Erie County, New York State. Through the proposed method for spatio-temporal Patterns, we could explore continual changes effectively in the spatial patterns reflecting the statistics by temporal spot cumulatively.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.63-71
• /
• 2011

Pattern recognition of a cucumber were conducted to detect directly the binary images by using thresholding method, which have the threshold level at the optimum intensity value. By restricting conditions of learning pattern, output patterns could be extracted from the same and similar input patterns by the algorithm. The algorithm of pattern recognition was developed to determine the position of the cucumber from a real image within working condition. The algorithm, designed and developed for this project, learned two, three or four learning pattern, and each learning pattern applied it to twenty sample patterns. The restored success rate of output pattern to sample pattern form two, three or four learning pattern was 65.0%, 45.0%, 12.5% respectively. The more number of learning pattern had, the more number of different out pattern detected when it was conversed. Detection of feature pattern of cucumber was processed by using auto scanning with real image of 30 by 30 pixel. The computing times required to execute the processing time of cucumber recognition took 0.5 to 1 second. Also, five real images tested, false pattern to the learning pattern is found that it has an elimination rate which is range from 96 to 98%. Some output patterns was recognized as a cucumber by the algorithm with the conditions. the rate of false recognition was range from 0.1 to 4.2%.

• 한국경영정보학회:학술대회논문집
• /
• 2007.11a
• /
• pp.322-327
• /
• 2007

최근 기업 환경이 복잡해지고 분산화 되어감에 따라 각 기업간의 그리고 부서 및 지점간의 프로세스 상호운용 및 협력이 중요한 이슈로 떠오르고 있다. 이러한 시점에서 기업간 비즈니스 프로세스와 메시지 등을 교류할 수 있는 상호운용성이 기업들에게 필수적인 요소로 고려되고 있다. 지금까지 많은 기술자와 연구자들에 의해 기업간 워크플로우 상호운용성을 해결할 수 있는 기술적인 노력이 꾸준히 이루어져 왔다. 기술적 문제의 해결도 중요하지만 이보다 우선적으로 해결되어야 될 것은 비즈니스 프로세스 상호운용성에 대한 개념적 모델링과 정확한 분석이다. 본 논문에서는 기존의 워크플로우 패턴들에 대한 연구들을 정리해 보여 줄 뿐만 아니라, 여러 기업간 비즈니스 프로세스가 상호운용될 시 충돌을 유발시킬 수 있는 패턴들을 제시할 것이다. 이러한 패턴들에 관한 연구는 여러 기업들이 복잡한 비즈니스 프로세스를 문제없이 효율적으로 상호운용할 수 있도록 도움을 주는 기본적인 정보가 될 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.168-171
• /
• 2003

Nano pattern structure is produced using the conventional injection molding and the MmSH method. Plastic parts using PC make used of the MmSH method is much better than the other about manufacture showed transcription of nano pattern. The conventional injection molding, transcription of plastic parts with nano pattern using HIPS showed better than PC. In the result, transcription of nano pattern improve when well liquidity and high temperature of mold surface.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.109-111
• /
• 2005

비즈니스 프로세스를 연구하는데 있어 최근의 이슈는 비즈니스 프로세스가 복잡화되고 대량화됨에 따라, 비즈니스 프로세스를 좀더 효율적으로 개선하고자 하는 데에 맞춰져 있으며, 이러한 동향에 힘입어 워크플로우 마이닝이라는 연구분야가 생겨나게 되었다. 이에, 본 논문에서는 워크플로우 패턴을 기반으로 한 워크플로우 마이닝 기법에 관하여 연구하고, 기술한다. 첫째로, 기본적으로 워크플로우 마이닝 기술과 그의 근원이 되는 워크플로우 로그에 관하여 간략히 설명한다. 그리고, 패턴기반 워크플로우 마이닝을 하기 위한 기본적인 워크플로우 패턴에 관하여 기술하고, 패턴 기반 워크플로우 마이닝을 하기 위한 기법으로 몇 가지 알고리즘을 제시한다.

• Annual Conference on Human and Language Technology
• /
• 1996.10a
• /
• pp.308-312
• /
• 1996

본 연구에서 말뭉치를 이용하여 기계 번역을 위한 한국어 문장 패턴을 추출하였다. 문장 패턴은 해당 언어의 기본 문법 구조를 가지고 있기 때문에 언어 습득을 위해서 유용하다. 기계 번역을 위해서는 기본 문법 구조뿐만 아니라 각 단어간의 의미 관계를 나타낼 수 있어야 한다. 본 연구는 품사 태깅 및 명사에 의미 소성을 태깅하여 한국어의 문장 패턴을 추출하였다. 추출된 문장 패턴은 구문분석시 애매성을 해소할 수 있으며, 동음다의어의 해석이 가능하며, 의미의 부정합 판정이 가능하다.