• Journal of the Korean Society for Railway
• /
• v.14 no.4
• /
• pp.383-389
• /
• 2011

Until now, in planning and constructing KTX and the Express Way, the connectivity and transfer between these facilities have not been considered. In this study the effect of mode choice behavior by connecting KTX and the Express Way is analyzed through estimating Multinomial Logit Model and Binary Logit Model. The SP and RP surveys to develop these models were carried out and the data were selected from the passengers using the KTX station, Express Bus Terminals and Rest Areas in the Express Way. To test the effect of connectivity and transfer in the field, the case study for Dongtan KTX station was carried out. According to the results, connecting the KTX station and the Express Way has the effect of increasing the demand by 30%. And this is caused by saving about 120 minutes of traveling time from Seoul to Pusan. This study shows that the connectivity and transfer can increase the efficiency of transportation system and the improvement in the mobility and accessibility will maximize the usages of these two facilities.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2D
• /
• pp.99-103
• /
• 2010

It is necessary to improve transfer impedance of express bus terminal users in order to increase the usage of public transportation. This study constructed a model for calculating transfer impedance based on bodily sensational transfer time in express bus terminal and calculated transfer impedance on major express bus terminals in Korea. The study results show that the addition of 100 meter exterior walking distance increases 3 minute travel time, 100 meter interior walking distance increases 5 minute travel time, 100 stairways increase 13 minute travel time, and escalators decreases 3 minute travel time. The calculated transfer impedance based on bodily sensational transfer time in this study can be utilized as objective criteria to compare transfer conditions of different bus terminals and to prioritize them for facility improvement. The calculated transfer impedance also can be used as facility guidelines for designing a new transit center.

• Transportation Technology and Policy
• /
• v.4 no.1
• /
• pp.67-82
• /
• 2007

• Transportation Technology and Policy
• /
• v.4 no.1
• /
• pp.103-114
• /
• 2007

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.2
• /
• pp.332-342
• /
• 2012

The current research aims at classifying the bus stops as transfer center in order to establish the rational bus transfer systems. Existing research typically identifies characteristics of demands for bus stops and land use surrounding the bus stops and classifies and profiles the bus stops. A common problem with this type of research is that the results with cross-sectional characteristics of land use and bus stop usage do not capture the details of trip chain, the fundamental characteristics of the trips with transfer. This paper therefore examines bus stop classifications with such variables as transport mode chains, intermediate stop chains and timing chains. The analysis on the data collected on Monday 20 April 2009 for passengers of Gyeong-gi bus results in a clear classification among bus stops in terms of such trip chain variables. The research would provide useful information for the decision support of transfer stops location choice and infrastructure design.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.519-525
• /
• 2012

This study suggests 3 different elements to develop a rail station-influenced area effectively. Above all, several typical models of TOD (Transit Oriented Development)are suggested. They consider the land use types around a rail station, characteristics of a rail station whether it serves a single line or multiple lines. a method of developing a rail station-influenced area. Secondly, the optimal level of service is suggested for connection facility and access modes. Finally, the allocation criteria of on-and-off facility to provide convenient transfer activity.

• Journal of Korean Society of Transportation
• /
• v.22 no.2 s.73
• /
• pp.27-39
• /
• 2004

The purpose of this paper presents realistic policy alternative about recent tendency to decrease of subway-users and diminution of use efficiency which are serious problems of Busan Subway. Several policy alternatives have been studied until now, such as subway transfer impedance solution plan, introduction of subway to transfer fare discounting policy, and etc.. But, those policy alternatives are difficult to carried out, because they are less effective and overburden to financial aspect. Therefore, I made use of research on subway utilization to presuppose service improvement, as an alternative, in the transfer fare discounting system between bus and subway which might be powerful influence over subway-users. To verify this proposed study, I took advantage of Stated Preference(SP) where I estimated fare revenue and effects on fluctuation of subway-users with nested logit model based on research results. Suitable alternatives are as follows: First, If municipal government carries out transfer fare discounting policy without shortening in-vehicle time and out-of-vehicle time transfer fare, it is reasonable to discount transfer fare 50% off on the assumption of financial support as much as \6.700 million annually. Secondly, in case of application of multi-factors at a time, transfer fare discounting and in & out vehicle time, it is preferred to have no charge for transfer option with financial support as much as expected income-loss \5,600 million.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.89-98
• /
• 2013

In recent years, it was recognized that aurban policy paradigm of sustainable urban growth management and transportation policies have been shifted : from the era of automobile-oriented policy to the era of public transport policy. Against this backdrop, the introduction of the multi-modal transfer center is very consequential. Therefore, it is necessary for the introduction of wide-area and local-centric transfer facilities, as well as the center of the country-led national backbone transfer center. This study was applicable at the multi-modal transfer center plans to introduce guidelines to provide transit facilities, considering the regional and functional characteristics to classify the types of multi-modal transfer center. The final types of multi-modal transfer center were classified into six, and by considering the combination of the criteria to be classified. The multi-modal transfer center type classification based on the case analysis of the types of facilities at domestic and abroad. If the data of multi-modal transfer are accumulated continuously, can expect a more reliable type classification.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1D
• /
• pp.11-15
• /
• 2010

It is necessary to improve transfer impedance of Urban Rail Station station users in order to increase the usage of public transportation. This study constructed a model for calculating transfer impedance based on bodily sensational transfer time in Urban Rail Station stations and calculated transfer impedance on major Urban Rail Station stations in Korea. The study results show that the addition of 100 meter exterior walking distance increases 2 minute travel time, 100 meter interior walking distance increases 3 minute travel time, 100 stairways increase 4 minute travel time, and escalators decreases 1 minute travel time. The calculated transfer impedance based on bodily sensational transfer time in this study can be utilized as objective criteria to compare transfer conditions of different Urban Rail Station stations and to prioritize them for facility improvement. The calculated transfer impedance also can be used as facility guidelines for designing a new transit center.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.17-23
• /
• 2009

Due to the rapid increase of vehicles on the street, Korean society is facing worsening traffic congestions and air pollutions. Also, the oil price pickup has led to increasing need for the use of public transportation. In particular, transfering among public transportation may be a main factor for riders who are commuting for a long distance journey. In order to ensure such connectivity, transfer stations have been actively built in Korea. However, it would be necessary to shift those vehicles, from cars to public transportations by enhancing the users' satisfaction with public transportation through strategies for minimizing the users' waiting cost by building an efficient connective system between transportation modes as well as the preparation of aforementioned transfer stations. Therefore, this study aimed to develop an algorithm for minimizing transferring passengers' waiting costs based on service intervals of linked buses within the transfer facilities. In order to adjust the service interval, we calculated the total costs, involving the wait cost of transfer passengers and bus operation costs, and produced an allocation interval, that would minimize the costs. We selected a KTX departing from Seoul station, and a No. 6014 bus route in Gwangmyeong city where it starts from the Gwangmyeong station in order to for verifying the model. Then, the transfer passengers' total waitting cost was reduced equivalent to the maximum of 212 minutes, and it revealed that the model performed very effectively.