• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.62-69
• /
• 2008

This paper proposes linearization technique that the linearity is improved by controlling IMD between the drive stage and the output stage. From the experimental results of W-CDMA 4FA input signal, this amplifier has ACLR of -48dBc@5MHz offset at 50W average power. Proposed linearization technique provides predistortion effect for using drive amplifier without additional circuit, which is the significant in this paper that it makes up for the weak point of analog predistortion method and feedforward method.

• Journal of Genetic Medicine
• /
• v.7 no.1
• /
• pp.78-81
• /
• 2010

Pericentric inversion is not rare in humans and is usually benign. However, pericentric inversion can lead to production of an unbalanced recombinant and might be a cause of repetitive pregnancy loss. Pericentric inversion of chromosome 22 is rare and only a few cases have been reported. We report a case of inv(22)(p13q12) carrier who had history of repetitive pregnancy loss including three spontaneous abortions and one fetal hydrops in which the chromosomal complement was rec(22)dup(22q) inv(22)(p13q12)mat. The maternal inv(22) and fetal rec(22) were confirmed by fluorescence in situ hybridization using region-specific probes (TUPLE1 on 22q11.2 and ARSA on 22q13). Because the identification of inv(22) or rec(22) in conventional karyotyping might be easily overlooked, great attention and additional molecular tests are required for accurate diagnosis of inv(22) and rec(22).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.335-339
• /
• 1999

This Paper Proposes a circuit system that is capable of rejecting the zero phase voltage produced by a inverter, which transform do-ac power using high speed power semiconductor. It generates a rejecting voltage which has the same amplitude as, but the opposite phase to the zero phase voltage. The rejecting voltage is superimposed on the load line for rejecting of the zero phase voltage through a transformer. Simulation results show that the zero phase voltage applied to the load and ground current are eliminated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.134-139
• /
• 1993

역위상의 소음, 진동을 이용하여 원래의 소음, 진동을 제어하려는 능동제어 기법의 물리학적 기본원리는 매우 오래전부터 알려져 있었으며 특허의 형태 로 본 기술이 구체화된 것은 1934년 독일의 Lueg에 의해서였다. Lueg의 능 동제어 개념 중 단일주파수음의 제거, 자유공간에 놓여진 음원 및 복잡한 파 형에 대한 개념은 능동제어 분야에서 많은 연구의 기초가 되고 있다. 1980년 대에 들어서는 디지탈 신호처리기술의 놀라운 발전에 힘입어 계산속도의 장 벽이 제거되고 능동제어에 대한 보다 나은 모델과 방법수립이 가능해짐에 따라 소음진동제어 방법으로서 능동제어기술이 더욱 실용화되기에 이르렀으 며 최근에 들어서는 실험실에서의 연구개발 단계를 벗어나 국내외적으로 본 기술을 실제 현장에 적용하려는 실용화 노력이 여러 분양에서 진행되고 있 다. 본 고에서는 최근의 국내외 능동소음진동제어 기술 연구 개발 동향을 살 펴보고 현장적용의 문제점등을 검토함으로써 보다 효율적이고 현실적인 본 기술의 실용화 연구에 도움이 되었으면 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.6
• /
• pp.3-8
• /
• 1999

In this paper, we propose a new active noise control system that cancels the only noise signal from the mixture selectively. A blind source separation realized by a dynamic recurrent neural network is used as a preprocessor of the active noise control system and separates the desired signal and the noise signal. The active noise control system adaptively generates an anti-noise signal to remove the only noise signal separated by the blind source separation. Computer simulation results show that the proposed scheme is effective to construct a selective attention system.

• Computational Structural Engineering
• /
• v.3 no.3
• /
• pp.141-146
• /
• 1990

This study is on a seismic analysis of absorber rod in KMRR Reactivity Control Mechanism. The model being studied is two coaxial tubes(control absorber rod and flow tube) immersed in the water and partially coupled(overlap) by water gap. The hydrodynamic mass effects by the water in each surrounding conditions are considered in the model. The natural frequencies, stresses and displacements of the system due to Safe Shutdown Earthquake are computed in the cases of in-phase modes and out-of-phase modes of two coaxial tubes. The results show that maximum stresses are well below the allowable limit but the maximum displacements at the ends of both tubes are so much that the absorber rod contacts with the flow tube(or surrounding wall).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2541-2549
• /
• 2002

In order to study the vibration characteristics of fluid-structure interaction problem, two rectangular plates coupled with bounded fluid were investigated. Experimental modal analyses were carried out to extract the modal parameters of the system. Additionally. finite element modal analyses performed using a commercial computer code, ANSYS. The FEM solutions were compared with the experimental solutions to verify the finite element model. As a result, the comparison between the experiment and FEM results showed excellent agreement. The transverse vibration modes, in-phase and out-of-phase, were observed alternately in the fluid-coupled system. The thickness effect of the plates on the fluid-coupled natural frequencies and mode shapes was investigated for two different cases with the identical thickness and the unequal thickness. It was found that the coupled natural frequencies increase with the thickness for the identical plates regardless of the mode phase. The experimental and the finite element analysis results showed that the out-of-phase mode shapes were deviated from the symmetrical mode shapes in the plate transverse direction fur the unequal plate thickness case.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.839-844
• /
• 2003

The effect of water level on the free vibration of a partially water-filled two rectangular plates structure was investigated by experimental modal analysis and finite element analysis using ANSYS computer program. Modal parameters of two rectangular plates coupled with water were obtained by means of experiment and the FEM solutions were compared with the experimental solutions to verify the finite element model. As a result, the comparison between the experiment and FEM results showed excellent agreement. The transverse vibration modes, in-phase and out-of-phase, were observed alternately in the fluid-coupled system. The effect of water level and water gap size on the fluid-coupled natural frequency were investigated. It was found that the natural frequency of the partially water-filled two rectangular plates are not proportional to the water level, but depend on mode number of plates.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.12
• /
• pp.1243-1250
• /
• 2014

In this paper, a wideband DDS module covering the frequency range from 0.5 to 1.1 GHz was designed and fabricated. The clock frequency of the DDS was selected 2.4 GHz in order for 600 MHz output bandwidth. Multiple spurious cancelling signals having same amplitude and $180^{\circ}$ phase difference compared to the spurious were created at the additional path and added to the output signal within DDS for the spurious performance improvement. The fabricated DDS module showed better spurious performance than the commercial DDS one more than 10 dB and frequency tuning time was 340 ns below.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1055-1063
• /
• 2013

CTL cell that is one of the standard electromagnetic generation equipment can measure the characteristic of the electromagnetic susceptibility and the electromagnetic interference. In case of being input the same magnitude signal with the phase difference of 0o or the phase difference of 180o at two input ports of CTL cell to be the fundamental resonant frequency(TE011) of 2.20GHz, the characteristics of the electric field and the magnetic field at the uniform area were measured. And, it measured the electric field characteristic due to the variation of the input power, the test position and the input frequency under the dominant E-field and the dominant H-field of CTL cell. Using these mesuremed data, it examined the operation characteristic and the available frequency band of CTL cell.