• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.12
• /
• pp.1062-1070
• /
• 2002

In this paper, variable radix-two multibit coding algorithm is presented and applied in the implementation of discrete cosine transform(DCT) and inverse discrete cosine transform(IDCT). Variable radix-two multibit coding means the 2k SD (signed digit) representation of overlapped multibit scanning with variable shift method. SD represented by 2k generates partial products, which can be easily implemented with shifters and adders. This algorithm is most powerful for the hardware implementation of DCT/IDCT with constant coefficient matrix multiplication. This paper introduces the suggested algorithm, it's proof and the implementation of DCT/IDCT The implemented IDCT chip with 8 PEs(Processing Elements) and one transpose memory runs at a tate of 400 Mpixels/sec at 54MHz frequency for high speed parallel signal processing, and it's verified in HDTV and MPEG decoder.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.465-468
• /
• 2001

MPEG-4 Parametric Coding 중 저 비트율로 음성신호를 부호화하는 HVXC(Harmonic Vector excitation Ending)의 복호화 모듈인 LSP 합성필터와 무성음 합성부, 유성음 합성부를 VHDL을 이용하여 구현하였다. MPEG-4 HVXC의 복호화 과정은 코드북을 이용하여 LSP 계수, VXC signal, 그리고 Spectral Envelop이 복호화 되어 각각 LSP 역필터, 무성음과 유성음 합성단을 통과하여 LPC계수와 유,무성음 여기신호로 변환된 후 LPC 합성필터링 과정을 거쳐 최종적으로 음성신호를 출력시킨다. LSP inverse filter에서 사용되는 cosine함수값을 위하여 Table based Approximation을 이용하여 적은 양의 Table 값을 사용하여 정확하고 고속의 cosine 연산을 수행하였다. VXC 복호화 과정에서는 신호의 중복성을 제거하는 Hidden Address in LSH 방법을 사용하여 코드북의 크기를 줄였다. 유성음 합성단에서는 IFFT 모듈을 이용하여 연산속도를 증가 시켰다. 최종적으로 위와 같이 구현된 시스템을 Simulation을 통해 Software 검증을 하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.4B
• /
• pp.479-490
• /
• 2001

본 논문에서는 제한된 필기 글꼴을 이용한 휴대형 정보기기용 온라인 문자 인식 알고리즘을 제안하였다. 한글과 영숫자를 동시에 사용하는 문자 인식은 애매성으로 인하여 인식율이 낮아지며, 이를 극복하기 위하여 모드 변환이나 영역 분리 등의 제약을 하게 된다. 본 논문에서 제안한 인식 알고리즘은 한글과 영문자, 숫자를 혼용하여 사용할 수밖에 없는 우리의 문자 환경에서 사용자의 평의성을 최대한 살려 입력 모드 전환이나 필기 영역 분리 등의 제약을 하지 않는 단일 알고리즘이다. 또한 역추적에 의하여 인식 과정에서 발생할 수 있는 미의식 또는 오인식을 보정할 수 있도록 한다. 제안한 알고리즘은 전체 알고리즘의 크기가 작으며 계산량이 적어서 메모리와 속도 등의 성능에 있어서 자원의 제약을 가질 수밖에 없는 초소형 휴대형 정보기기의 입력 장치로서 적합하도록 연구하였다. 실험 결과 영숫자 98%, 한글 97%의 인식율을 얻어 유용성을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.839-841
• /
• 2000

텍스처 정보는 정지 영상 뿐 아니라 동영상 분석에서도 많은 정보를 제공한다. 이러한 텍스처 정보를 동영상의 움직임 분류에 사용하여 기존의 색, 색영역의 배치 정보, 기준 형상, 명도 텍스처 등을 기본 탐색 키로 삼는 동영상 검색 시스템에 텍스처 특성을 움직임 정보에 적용하여 저 수준 정보에서 움직임 정보가 직접적으로 추출될 수 있음을 보였다. 이 방법의 장점은 배경 소거, 오브젝트 추출 및 추적, 참조 곡선 탐색 등 많은 계산량을 요구하는 연산들이 없이도 움직임 정보를 압축 동영상에서 추출할 수 있다는 것이다. 또한 동영상은 데이터의 양이 매우 크기 때문에 압축되어 있는 것이 필수인데 본 연구에서는 웨이브릿으로 압축되어 있는 동영상에서 움직임 정보가 고주파 부분에 집중되어 있는 점을 이용하여 역변환을 거치지 않고 직접 템포럴 텍스처를 생성하였다. 따라서 계산 속도를 향상시켰으며 계산 과정도 행렬 연산을 기본으로 수행하여 계산 과정을 간단하게 하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.644-646
• /
• 1998

The main drawback of filtered-X LMS(FXLMS) algorithm for the ANC of broadband noises is its low convergence speed when the filtered reference signals are strongly correlated, producing a large eigenvalue spread in correlation matrix. This correlation can be caused either by autocorrelation of the signals of the reference sensors, or by coupling between the error path which introduces intercorrelation in the filtered reference signals. In this paper, we introduce a transform domain FXLMS(TD-FXLMS) algorithm that has a high convergence speed by orthogonal transform's decorrelation properties.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.1-8
• /
• 2018

This paper describes new communication methods for transmitting torque commands between the vehicle controller that determines the amount of power generation in a range-extended electric vehicle and the engine controller that performs it. Generally, vehicles use CAN communication, but in this case, the hardware and software of the existing engine controller must be modified. For this reason, it is not easy to apply CAN communication to small and medium sized automotive reorganize companies. Therefore, this research presents a pin-pin communication method for applying the existing mass produced engine controller to range-extended electric vehicles. The pin-pin communication method converts the driver's demand torque control map inside an mass produced engine controller into a virtual accelerator opening position according to the target speed and target torque of the engine, and converts this to a voltage signal for the existing mass produced engine controller to recognize it. The virtual accelerator opening positions are mounted in the form of a control map in the vehicle controller through the reverse conversion process in an offline environment and are determined by the engine generating power requirements and engine optimal operating point algorithm. These algorithms and signal conversion circuits for engine torque transmission have been mounted on the vehicle controller to conduct the virtual accelerator opening position conversion process according to the engine target torque and to establish the virtual accelerator voltage signal using the signal converter.

• The Journal of Engineering Geology
• /
• v.22 no.4
• /
• pp.459-466
• /
• 2012

A difficulty encountered in engineering seismic mapping is that reflection events from shallow discontinuities are commonly overlapped with coherent noise such as air wave, direct waves, head waves, and high-amplitude surface waves. Here, the radial trace transform, a simple geometric re-mapping of a trace gather (x-t domain) to another trace gather (v-t domain), is applied to investigate the rejection effect of coherent linear noises. Two different types of data sets were selected as a representative database: good-quality data for intermediate sounding (hundreds of meters) in a sedimentary basin and very noisy data for shallow (${\leq}50m$) mapping of the weathered zone and bedrock surface. Results obtained with cascaded application of the radial transform and low-cut filtering proved to be as good as, or better than, those produced using f-k filtering, and were especially effective for air wave and direct wave. This simple transform enables better understanding of the characteristics of various types of noise in the RT domain, and can be generally applied to overcoming diffractions and back-scatterings caused by joints, fractures, and faults commonly that are encountered in geotechnical problems.

• Journal of Digital Convergence
• /
• v.13 no.2
• /
• pp.159-175
• /
• 2015

The two-dimensional QR code has advantages such as directional nature, enough data storage capacity, ability of error correction, and ability of data restoration. There are two major issues like speed and correctiveness of recognition in the two-dimensional QR code. Therefore, this paper proposes a morphology-based algorithm of detecting the interest region of a barcode. Our research contents can be summarized as follows. First, the interest region of a barcode image was detected by close operations in morphology. Second, after that, the boundary of the barcode are detected by intersecting four cross line outside in a code. Three, the projected image is then rectified into a two-dimensional barcode in a square shape by the reverse-perspective transform. In result, it shows that our detection and recognition rates for the barcode image is also 97.20% and 94.80%, respectively and that outperforms than previous methods in various illumination and distorted image environments.

• Journal of the Korean earth science society
• /
• v.41 no.3
• /
• pp.238-247
• /
• 2020

This study simulated strong ground motion waveforms in the southern Korean Peninsula, based on the physical earthquake modeling of the Southern California Earthquake Center (SCEC) BroadBand Platform (BBP). Characteristics of intensity attenuation were investigated for M 6.0-7.0 events, incorporating the site effects. The SCEC BBP is software generates broadband (0-10 Hz) ground-motion waveforms for earthquake scenarios. Among five available modeling methods in the v16.5 platform, we used the Song Model. Approximately 50 earthquake scenarios each were simulated for M 6.0, 6.5, and 7.0 events. Representative metrics such as peak ground acceleration (PGA) and peak ground velocity (PGV) were obtained from the synthetic waveforms that were simulated before and after the consideration of site effects (V_S30). They were then empirically converted to distribution of instrumental intensity. The intensity that considers the site effects is amplified at low rather than high V_S30 zones.

• Journal of Biomedical Engineering Research
• /
• v.19 no.4
• /
• pp.379-384
• /
• 1998

To measure precisely the blood velocity in the skin microcirculation, we have used time domain correlation (called Cross-Correlation) based on the processing of the backscattered RF signal obtained with a wideband echographic imaging transducer, although it is difficulties of adaptation of the pulsed wave system, because of the data processing in real time and the hardware problem. This dedicated technology based on a 20MHz echographic imaging system has been developed. We present how the experimental data, i.e. the backscattered RF signal, have to be analyzed. After RF lines realignment, stationary echo canceling procedure and correlation level control, a velocity profile has been obtained. In-vitro result show that velocity measurements as low as 0.1mm/sec attainable with a 80${\mu}m$ in axial resolution. We have also validated with in-vivo experimentation on the external ear of a rabbit using B-mode sector scanning image and M-mode image of a custom made 20MHz skin image system. The flow of the "auriculares caudales" vein, a microvessel of 600 m diameter, has been detected and studied. This technique will allow a more precise exploration of circulatory troubles in cutaneous pathologies.