• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5870-5876
• /
• 2014

The aim of this study was to suggest the System Architecture for Effective Architectural MEP Pipe Reverse Design(PRD) based on the Point Cloud and derive the consideration. To do this, the requirement and use-cases related to the MEP pipe reverse design work were defined and the architecture for the reverse design automation was proposed. To identify a consideration for finding the architecture issues, a prototype was developed using the architecture and evaluated.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.28-36
• /
• 1999

An efficient inverse design method based on the MGM(Modified Garabedian-McFadden) method has been developed. The 2-D Navier-Stokes equations are solved for obtaining the surface pressure distributions and coupled with the MGM method to perform the inverse design. The MGM method is a residual-correction technique, in which the residuals are the difference between the desired and the computed pressure distribution. The developed code was applied to several airfoil shapes and the propeller. It has been found that they are well converged to their targeting shapes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.236-242
• /
• 2019

Recently, scanning projects have been carried out in various construction and construction fields for maintenance purposes. The point cloud generated by the scan results is composed of a number of points representing the object to be scanned. The process of extracting the necessary information, including dimensions, from such scan data is called paradox. The reverse engineering process of modeling a point cloud as BIM involves considerable manual work. Owing to the time-consuming reverse engineering nature of the work, the costs increase exponentially when rework requests are made, such as design changes. Reverse engineering automation technology can help improve these problems. On the other hand, the reverse design product is variable depending on the use, and the kind and detail level of the product may be different. This paper proposes the G2BM (Geometry-to-BIM mapping) rule definition method that automatically maps a BIM object from a primitive geometry to a BIM object. G2BM proposes a process definition and a customization method for reverse engineering BIM objects that consider the use case variability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.692-698
• /
• 2016

Recently, the facility extension construction and maintenance market portion has increased instead of decreased the newly facility construction. In this context, it is important to examine the reverse engineering of MEP (Mechanical Electrical and Plumbing) facilities, which have the high operation and management cost in the architecture domains. The purpose of this study was to suggest the Large Point Cloud-based Pipe Shape Reverse Engineering Method. To conduct the study, the related researches were surveyed and the reverse engineering automation method of the pipe shapes considering large point cloud was proposed. Based on the method, the prototype was developed and the results were validated. The proposed method is suitable for large data processing considering the validation results because the rendering performance standard deviation related to the 3D point cloud massive data searching was 0.004 seconds.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1322-1325
• /
• 2009

The impeller and vane diffuser for the mixed flow pump(NS550) was designed by using meridional selection program and inverse design method. We decided the meridional shape of the impeller from the meridional design parameter, such as the specific speed and maximum diameter at the impeller exit. The meridional shape of vane diffuser was set from the impeller shape, distribution of cross sectional area and maximum diffuser diameter. The angle of impeller blade and diffuser vane was designed by using inverse design method. The predicted overall performance by using commercial CFD code(ANSYS CFX-11) shown good agreement with design goals.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.4
• /
• pp.17-23
• /
• 2002

The present paper describes the optimum inverse design of 2-D linear cascade airfoil. The pressure coefficient of an airfoil surface is taken as the objective function, and non-orthogonal incompressible Navier-Stokes equation is applied to calculate the pressure coefficient. Both of steepest descent and conjugate gradient method have been used to make the objective function go to zero. The 1st order finite differential method is applied to the searching direction and the golden section method is used to compute the searching distance. As a result of the present work, a good convergence to the target airfoil has been obtained.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.6-9
• /
• 2016

최근 3D 스캔 장비 발전과 함께 물체를 스캔하여 모델링하는 역설계 기술이 발전하고 있다. 하지만 역설계를 통해 만들어진 메쉬는 3D 스캔 장비의 데이터 누락, 측정 에러와 같은 이유 때문에 무딘 모서리, 거친 표면과 같은 에러가 발생한다. 이러한 에러를 제거하기 위해 다양한 메쉬 에디팅 방법이 연구되고 있다. 대부분의 기존 방법은 특정 영역을 세밀하게 에디팅 하기 때문에 사용자 에디팅 능력에 따라 메쉬 품질이 달라지고, 에디팅 시간도 오래 걸린다. 본 논문은 프리미티브 수정을 이용한 새로운 메쉬 에디팅 방법을 제안한다. 먼저 원본 메쉬를 모양에 따라 여러 개의 메쉬 세그먼트로 나눈다. 그런 다음 각 메쉬 세그먼트에 프리미티브 타입을 지정하고 해당 파라미터를 수정하여 사용자가 원하는 모양으로 에디팅 한다. 제안한 방법은 프리미티브 수정 기반의 직관적 사용자 인터페이스를 지원하며 빠른 시간 안에 사용자가 의도한대로 에디팅 할 수 있다.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.6
• /
• pp.579-585
• /
• 2016

3D laser scanning can be used for scanning the freeform surface and building a model from which the measurements could be taken, in order to solve the difficulty with getting access to the exact freeform shape and position data of the complex building envelope. The shape making process using 3D scanning is as follows: point cloud, mesh surface segmentation, NURBS(Non-Uniform Rational B-spline) surface generation, and parametric solid model generation. In this research, we review previous studies, reverse engineering notion, importance of reverse engineering usage for freeform envelope, and previous cases in order to identify the detail reverse engineering process for prefabrication and construction of freeform panels using 3D laser scanning technology. Therefore, the purpose of this research is to present a basic information which should be considered during design and construction phase and improve quality and constructibility of freeform building by analyzing the reverse engineering process and case study for prefabrication and construction of freeform panels using 3D laser scanning. The research results will enable 3D shape engineering and design parameterization using reverse engineering to be used in various construction projects.

• Journal of Science Education
• /
• v.35 no.2
• /
• pp.283-294
• /
• 2011

The purpose of this study were to develop a tutorial for secondary students to understand of basic concepts of special relativity, which is appropriate for the cognition level of secondary student. We developed the concept evaluation tool and the tutorial material. Result from pretest and post-test are presented to verify the effect of the tutorial for helping student understanding of the concept such as time, event, reference frame, relativity of simultaneity. Secondary student had intense cognitive conflict about the complex concepts such as simultaneity, length contraction and time expansion. This tutorial could be proposed methodology to overcome cognitive difficulty for understanding these concepts.

• Journal of computational fluids engineering
• /
• v.3 no.1
• /
• pp.37-45
• /
• 1998

A new and efficient inverse design method based on the numerical optimization technique has been developed. The 2-D incompressible Navier-Stokes equations are solved for obtaining the objective functions and coupled with the optimization procedure to perform the inverse design. The steepest descent and the conjugate gradient method have been applied to find the searching direction. The golden section method was applied to compute the design variable intervals. It has been found that the airfoil and the pump impellers are well converged to their targeting shapes.