• Korean Journal of Applied Biomechanics
• /
• v.21 no.2
• /
• pp.153-159
• /
• 2011

The purpose of this study was to develop an innovative training model and method to improve the posture and motion, while pulling up during weight lifting by evaluating the problems of Korean weight lifters performing this motion. To investigate the effectiveness of the new training method substitute members of the Korean national weight lifting team performed both the original pull up technique and new pulling training technique while kinetics and kinematics were recorded. For this study, the first phase of the new training method is more appropriate than the original training with the pull up drop slow deadlift to the knee joint. For the second phase, the new training motion is deemed to be more effective than the current box deadlift motion. Also, this new motion corrects the posture as there is more anterior hip joint motion(about 10 cm) and the knee flexes to about 120 degrees. For the third phase, starting about 10cm above the knee the box snatch high pull up is identified as a more suitable training method. For the forth phase, the box top snatch method is judged to be a more effective training method than the original top snatch training method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1134-1138
• /
• 2008

In this paper, the synthesis of distributed impedance transformers is presented that is essential for power divider design, whereby a broadband power divider is designed. Transfer functions of distributed transformers are synthesized with Chebyshev approximation, and their element values are calculated for various minimum insertion losses(MIL) and ripples. Desired performance of transformers is obtained by optimizing MIL's and ripples of a transfer function. As an application example, a four-way power divider is designed that operates over 2 to 8GHz frequency range. Experimental results are shown to approach the design performance, so transformer design by distributed network synthesis proves to be useful to power divider design.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.3
• /
• pp.173-173
• /
• 2004

In this paper, a wideband two-layer H-shaped microstrip antenna for WLAN is designed. To increase the bandwidth of microstrip patch antenna a configuration of stacked type using parastic element is used. Furthermore, to reduce the size of microstrip patch antenna, two techniques are employed . the first one is H-shaped patch type and the second one is that the main radiator and parastic patch are shorted to the ground plane using ten shorting posts. The antenna bandwidth and radiation characteristics are calculated by ENSEMBLE ver. 5.0 simulation software, and compared with the experimental results. Experiment results show that the bandwidth of antenna in 740㎒ centered at 5.46㎓(13.5%), which is close agreement with the calculations, 770㎒(13%). Also, the antenna size can be reduced by 71.5% compared with the half wavelength rectangular microstrip antenna using the same substrate at the same frequency.

• Water for future
• /
• v.28 no.4
• /
• pp.171-183
• /
• 1995

The Snyder's Unit Hydrograph Method is applied to simulate the November 1985 Flood of the Cheat River Basin, which is located in the North-East region of West Virginia in United States. The entire basin is divided into many subareas according to the hydrologic and geologic characteristics. The overland flows are computed on each subarea and combined together along the streams. The flows are also routed by the Normal Depth Storage and Outflow Method in Modified Pulse option. The several structural flood control alternatives are examined. The study shows the OPTION III which has the three moderately sized dam is ultimately suitable to control the flood. The HEC-1 computer model is used to analyze the flood.

• Journal of the Korean Magnetics Society
• /
• v.9 no.2
• /
• pp.85-90
• /
• 1999

The ferromagnetic resonance study of the magnetostatic wave modes for an YIG thin film, grown by a liquid phase epitaxy method, was performed by an FMR spectrometer at room temperature. The magnetostatic surface wave and backward volume wave modes show periodic excitations in parallel configuration, whereas the complex spectra were observed in perpendicular configuration. The resonance spectra in parallel configuration can be well explained by the Walker and Damon-Eshbach theory. The peak-peak line width of uniform mode was 0.4 Oe. The saturation magnetization $M_s$ of the YIG thin film was calculated as 137 emu/㎤. In order to know the dependence of the magnetostatic modes as a function of the saturation magnetization and the thickness, the (1,1) and (3,1) modes of the magnetostatic backward volume wave were compared and theoretically calculated.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.2
• /
• pp.69-74
• /
• 2000

The bandwidth of microstrip slot antenna with T-shaped feed line was a wider than one of the conventional feeding structure. When the slot antenna with bi-directional radiator wants to radiate only one direction, the reflector must be set up seperately. But this antenna doesn't need set up reflector. And then we proposed to a new method of a directional slot radiator with a cross-shaped feedline including the reflector using 2-layers dielectric materials. It is calculated waves and electric field distribution in the time domain by using FDTD method. We also are calculated return loss, VSWR, input impedance, and radiation pattern in the frequency domain by Fourier transforming the time domain results, respectively. It was found that the bandwidth of this antenna changes as length($\I_s$) and width($\W_s$) of slot, length of the horizontal feedline($\I_d$), length of the vertical feedline($\I_u$) and offset sensitively. After optimizing the parameters of design, the maximum bandwidth was measured as 1,850MHz at the center frequency 2.5 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.1
• /
• pp.89-95
• /
• 1997

X-cut y-propagation $LiNbO_{3}$ optical modulator is analyzed by finite element calculation. the purpose of this trial is the design of wide-bandwidth x-cut $LiNbO_{3}$ optical modulator with ridge wave guide, which was only applied to z-cut $LiNbO_{3}$ optical modulator. the simulation tool is examined by the comparison between our results and Becker's. And we consider the optimum position of optical waveguide to electrodes for decreasing the driving voltage. The calculated driving-voltage, characteristic impedance and microwave effective index at $1.3{\mu}{\textrm{m}}$ optical wavelength are 18 V.cm, $48.13{\Omega}$ and 2.168, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.7
• /
• pp.339-345
• /
• 2006

We suggest new 2D two-way Parabolic equation algorithm for multiple scattering. Our method is based on the successive performance of the single scattering approach. First. as the single scattering algorithm, the reflected and transmitted fields are calculated at the vertical interface of a range independent sector. Then. the reflected field is saved and the transmitted field Propagated to the next vertical interface with the split-step Pade method. After one step ends, the same Process is repeatedly performed with the change of the Propagation direction until the reflected field at the vertical interface is close to zero. Final incoming and outgoing fields are obtained as the sum of the wave fields obtained for each step. Our algorithm is relatively simple for the numerical implementation and requires less computational resources than the existing algorithm for multiple scattering

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.112-121
• /
• 2020

In suspension bridges, hanger cables are the main load-supporting members. The tension of the hanger cables of a suspension bridge is a very important parameter for assessing the integrity and safety of the bridge. In general, indirect methods are used to measure the tension of the hanger cables of a suspension bridge in traffic use. A representative indirect method is the vibration method, which extracts modal frequencies from the cables' responses and then measures the cable tension using the cables' geometric conditions and the modal frequencies. In this study, the image processing technique is applied to facilitate the estimation of the dynamic responses of the cables using the image signal, for which a portable digital camcorder was used due to its convenience and cost-efficiency. Ambient vibration tests were conducted on a suspension bridge in traffic use to verify the validity of the back analysis method, which can estimate the tension of remote hanger cables using the modal frequencies as a parameter. In addition, the tension estimated through back analysis method, which was conducted to minimize the difference between the modal frequencies calculated using finite element analysis of the hanger cables and the measured modal frequencies, was compared with that measured using the vibration method.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.2
• /
• pp.22-31
• /
• 1997

We developed a general purpose program for the analysis of flows in the combustor with recirculating flow regime and simulated the flows. The program uses non-staggered grids based on finite volume method and the primitive variables are cartesian velocities. The combustion model is irreversible one step reaction with infinite chemistry The Favre averaged governing equations are considered and the clipped gaussian distribution is considered as a probability density function of the conserved scalar. We calculated turbulent diffusion flame with recirculating flow regime. Simulation shows two recirculating regions like experimental results. Velocity, turbulent kinetic energy, temperature and concentration distribution in simulation agree well with experimental data.