• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.39-48
• /
• 2011

There still is a limitation in the usage of 3D clothes model in the production line due to the lack of compatibility between 3D modeling software, and its accurate 2D pattern making software, especially for free formed dress with tight fitted zone and draped part. In this study, obstacles in the 3D direct dress design process was overcome by solving the compatibility among each step of 3D virtual design process as well as adopting 3D-2D direct pattern development program called 2C-AN. Efficacy of making 2D pattern from 3D dress design using 2C-AN program developed by the authors was examined during the course of actual dress making process. Accurate ease over the fitted dress part was examined by 3D scanning technology, and the actual appearance of the draped part was compared with the simulation image of dress model. It was confirmed that the entire 3D design process and direct 2D pattern development proposed in this study was accurate enough to use in the 3D design process.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.242-247
• /
• 2014

To see the discrepancies between the calculated and the delivered dose distribution of IMRT fields for respiratory-induced moving target according to the motion ranges. Four IMRT plans in which there are five fields, for lung and liver patients were selected. The gantry angles were set to $0^{\circ}$ for every field and recalculated using TPS (Eclipse Ver 8.1, Varian Medical Systems, Inc., USA). The ion-chamber array detector (MatriXX, IBA Dosimetry, Germany) was placed on the respiratory simulating platform and made it to move with ranges of 1, 2, and 3 cm, respectively. The IMRT fields were delivered to the detector with 30~70% gating windows. The comparison was performed by gamma index with tolerance of 3 mm and 3%. The average pass rate was 98.63% when there's no motion. When 1.0, 2.0, 3.0 cm motion ranges were simulated, the average pass rate were 98.59%, 97.82%, and 95.84%, respectively. Therefore, ITV margin should be increased or gating windows should be decreased for targets with large motion ranges.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.305-311
• /
• 2012

With the rapid deployment of hipass$^{(R)}$, the congestion is inevitable due to the operation of the hipass lane system. Recently, SMART Highway project have developed a multi-lane mainline tolling system, called SMART Tolling system. To analyze the effectiveness of the system in terms of capacity, this study tries to estimate the capacity and its improvement of multi-lane tolling system based on current hipass$^{(R)}$ data. The methodology uses the saturation time headway. This follows three steps; 1) estimate the saturation time headway, using hipass$^{(R)}$ data, and capacity. 2) estimate two factors (the first one is dividing the one side lane width and lateral clearance factor ($f_w$) into two side one, the second one is dividing the capacity of hipass lane operating a circuit breaker into the capacity of hipass lane not operating, the last one is increasing factor of lane width). 3) calculate the capacity of multi-lane mainline tolling system. The results of method produced 2172~2187 veh/hour as smart tolling capacities, respectively. Those are higher about 370 veh/hour than the values from existing literature reviews. Additionally, saturation time headways were identified as lower by 0.5 seconds/veh than existing headways based on hi-pass$^{(R)}$ based one, which naturally implies the improvement in capacity. Some limitations and future research agenda have also been discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.140-148
• /
• 2017

The purpose of this study was to examine the effects of acute aerobic exercise at different intensities on the blood pressure, blood lipids and fibrinolytic markers in pre-hypertension college-aged males. Six subjects performed an acute running exercise at three different intensities(low intensity(LI): 50-60% heart rate reserve(HRR), moderate intensity(MI): 60-70%HRR, and high intensity(HI): 70-80%HRR). The blood pressure(systolic(SBP) and diastolic blood pressure(DBP), blood lipids(total cholesterol(TC) and high-density lipoprotein cholesterol(HDL-C)) and fibrinolytic markers(tissue plasminogen activator(tPA) and plasminogen activator inhibitor-1(PAI-1)) were determined before(PRE), immediately after(POST) and 60minutes after the exercise(60 POST). Results: the SBP in the LI group was significantly increased at POST(p=0.013). The ES levels for the SBP in the MI and HI groups were reduced (-1.33 and -1.23, respectively), though the differences were not significant. The HDL in the MI(p=0.003) and HI(p=0.002) groups were significantly increased at 60 POST. Also, the tPA in the MI(p=0.021) and HI(p=0.042) groups were significantly increased at POST.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.1
• /
• pp.11-19
• /
• 1987

The objectives of this study were: 1. To investigate the relationship between arm movement and clothing pressure in the upper arm and shoulder blade area. 2. To find out the relationship between ease of basic pattern and clothing pressure in the upper arm and shoulder blade area. 3. To study any interaction between arm movement and ease of clothing on the clothing pressure. This study was an experimental research using the measuring devices of clothing pressure. The subjects were the unmarried college women. Arm movements were 3 types($45^{\circ}$, $90^{\circ}$, $135^{\circ}$) to the horizontal direction. The ease of basic pattern in the breast was 3 types(4 cm, 6 cm, 8cm). The statistical analyses used in this study included mean, standard deviation and one-way analysis of variance. The results obtained from this research were as follows; 1. The whole clothing pressure increased as the angle of the arm movement increased. Part of upperarm and shoulder blade above axillar gave high clothing pressure while part of upperarm and shoulder blade above upper breast, low pressure. Difference between highest clothing pressure and lowest clothing pressure increased as the arm movementdid. 2. The whole clothing pressure increased as the ease of the basic pattern in breast decreased. No matter how the ease of basic pattern in the breast area varied, the Points where generally showed high and low pressure were identical. 3. The whole arm pressure increased as the movement angle increased and the ease of pattern in breast area decreased. Difference between highest clothing pressure and lowest clothing pressure increased as the movement angle increased and the ease decreased.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.11
• /
• pp.167-178
• /
• 2020

This study attempted to find out the difference in the patterns of jeogori between commercially available Shinhanbok brands by comparing and analyzing the patterns of the changing Shinhanbok jeogori in consideration of material characteristics, fit, and fastening. After purchasing and disassembling 6 products, analysis was conducted with the disassembly pattern. As a result of analyzing the shape of the jeogori, the 1st, 3rd and 6th brands showed no darts. In the case of the 5th brand, the three-dimensional effect of the human body was expressed with a princess line. As a result of the appearance evaluation, the 5 brands were evaluated as the highest in most items except for the space of the front width and the group wrinkles of back sleeve armhole, and the appearance was analyzed to be the best. As a result of evaluating the clothing pressure, it was analyzed that the chest circumference of the first brand was smaller than that of the other brands, and the shoulder width and shoulder length were also shorter, and pulling occurred even after wearing. As the demand for new hanbok increases, it is believed that it is necessary to establish a size system for ready-made clothes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1395-1401
• /
• 2005

Mobile manipulator is a robot that has mobility and manipulability with the combination of the task robot and mobile robot. One of the most important feature of the Mobile Manipulator is redundant freedom. Using the redundant freedom, Mobile Manipulator can move various mode, perform dexterous motion. It can have the wider workspace and better performance in avoidance of singularity and obstacle than the fixed base structured robot. Cooperation control using the Mobile Manipulator improves the performance of the robot with redundant freedom in workspace. In this paper, configuration control of the Mobile Manipulator has been studied using Task Segment and TOMM(Task-Oriented Manipulability Measure). For verifying the proposed algorithm, we implemented a mobile manipulator, PURL-II, which is composed of a mobile robot with 3DOF and a task robot with SDOF.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.1
• /
• pp.48-54
• /
• 2008

MMORPGs may involve a great number of concurrent players, and those servers usually have to manage hundred, or even thousands of avatars co-existing in the same virtual world. So if failing to send a command or an event message, or sending it too late may cause damages to the avatar evolution(death, injury, loss of resources), and may result in unjustified penalties for the player. Many policies could be defined to realize a ranking evaluation of available servers. Unfortunately, due to the highly dynamic characteristics of server loads and network performances, any optimal allocation would soon become sub-optimal. In order to solve those problems we propose the "time-interval based fairness partitioning method"(TIP). TIP will distribute the avatar to the game server equally with time-interval in order to avoid the problems form the unfairness of game servers load.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.1
• /
• pp.23-33
• /
• 2022

The horizontal-to-vertical spectral ratio (HVSR) of ambient noise is widely used to identify the resonant frequency of a site. The frequency at the largest HVSR is regarded as the resonant frequency. The source of ambient noise is impossible to identify and control. Therefore, obtaining reliable HVSR of ambient noise requires sufficient measurement time and absence of near-field vibration. In this study, we investigated the minimum stabilization time required for a portable seismometer and the effect of the distance between the seismometer and artificial vibration on HVSR estimation. In the case of a soil site, the HVSR was stabilized after 5 minutes after sensor installation. In the case of a rock site, stabilization required more than an hour. Human-footsteps within 10 m of the seismometer strongly influenced the HVSR for the soil site. These results provide a field guideline when measuring ambient noise for HVSR.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.355-372
• /
• 2006

Mission opportunities and trajectory characteristics for the future Korean Mars mission have designed and analyzed using KSIV-III(Korea Space Launch Vehicle-III). Korea's first space center, 'NARO space center' is selected as a launch site. For launch opportunities, year 2033 is investigated under considering the date of space center's completion with KSLV series development status. Optimal magnitude of various maneuvers, Trans Mars Injection (TMI) maneuver, Trajectory Correction Maneuver (TCM), Mars Orbit Insertion (MOI) maneuver and Orbit Trim Maneuver(OTM), which are required during the every Mars mission phases are computed with the formulation of nonlinear optimization problems using NPSOL software. Finally, mass budgets for upper stage (launcher for KSIV-III and spacecraft are derived using various optimized maneuver magnitudes. For results, daily launch window from NARO space center for successful Korean Mars mission is avaliable for next 27 minutes starting from Apr. 16. 2033. 12:17:26 (UTC). Maximum spacecraft gross mass which can delivered to Mars is about 206kg, with propellant mass of 109kg and structure mass of 97kg, when on board spacecraft thruster's Isp is assumed to have 290 sec. For upper stage, having structure ratio of 0.15 and Isp value of 280 sec, gross mass is about 1293kg with propellant mass of 1099kg and structure mass of 194kg. However, including 10% margins to computed optimal maneuver values, spacecraft gross mass is reduced to about 148kg with upper stage's mass of 1352kg. This work will give various insights, requiring performances to developing of KSIV-III and spacecraft design for future Korean Mars missions.