• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.286-293
• /
• 2015

The purpose of this study was to evaluate the set up accuracy using stereotactic body frame and frameless immobilizer for lung stereotactic body radiation therapy (SBRT). For total 40 lung cancer patients treated by SBRT, 20 patients using stereotactic body frame and other 20 patients using frameless immobilizer were separately enrolled in each group. The setup errors of each group depending on the immobilization methods were compared and analyzed. All patients received the dose of 48~60 Gy for 4 or 5 fractions. Before each treatment, a patient was first localized to the treatment isocenter using room lasers, and further aligned with a series of image guidance procedures; orthogonal kV radiographs, cone-beam CT, orthogonal fluoroscopy. The couch shifts during these procedures were recorded and analyzed for systematic and random errors of each group. Student t-test was performed to evaluate significant difference depending on the immobilization methods. The setup reproducibility was further analyzed using F-test with the random errors excluding the systematic setup errors. In addition, the ITV-PTV margin for each group was calculated. The setup errors for SBF were $0.05{\pm}0.25cm$ in vertical direction, $0.20{\pm}0.38cm$ in longitudinal direction, and $0.02{\pm}0.30cm$ in lateral direction, respectively. However the setup errors for frameless immobilizer showed a significant increase of $-0.24{\pm}0.25cm$ in vertical direction while similar results of $0.06{\pm}0.34cm$, $-0.02{\pm}0.25cm$ in longitudinal and lateral directions. ITV-PTV margins for SBF were 0.67 cm (vertical), 0.99 cm (longitudinal), and 0.83 cm (lateral), respectively. On the other hand, ITV-PTV margins for Frameless immobilizer were 0.75 cm (vertical), 0.96 cm (longitudinal), and 0.72 cm (lateral), indicating less than 1 mm difference for all directions. In conclusion, stereotactic body frame improves reproducibility of patient setup, resulted in 0.1~0.2 cm in both vertical and longitudinal directions. However the improvements are not substantial in clinic considering the effort and time consumption required for SBF setup.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.999-1011
• /
• 2008

To most of the students studying fashion related major, the graduation fashion show is a big challenge. They have to put together all they learn and show what they can do to their future employers. They design, pattern work, and make up garments for the show all by themselves. Unfortunately. while they make up their garments, they usually don't Dow exactly body measurements of the models. So quite often they have to alter their art works up to the last minute of the fashion show opening. Sometimes such unadequate work process ruins their work. The purpose of this study is to suggest block patterns of Korean fashion models measurements for basic items, such as jacket and pants for male models and torso length block pattern, skirt and pants for female models. 20 male and 20 female professional models were measured. The block patterns were based on their measurements. After the first fitting test, patterns were corrected by their body characteristic. For both male and female models, it was found desirable to fix the shoulder width and make an adjustment to the patterns with a deviation of width and girth items. In case of the resultant patterns the satisfaction was made better. Model sizes proposed in this study are considered closer to the size of average models, since they were based on A-grade models who are currently working in Korea. The resultant patterns can be produced by simply making a slight adjustment to the width of the proposed pattern in this study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4D
• /
• pp.369-376
• /
• 2010

At present, many problems in traffic operation and safety occurs since there is no clear design criteria on designating the not-permitted entrance/exit section at curb areas within complex areas. Even, there is no specific and detailed researches on the not-permitted entrance/exit section by now. This research calculated the proper length of the entrance/exit section at curb areas by dividing the access not-permitted section into the two sections. First, the calculation of the entrance section was done by considering the location of crosswalks, stop line clearance, the queue length of vehicles approaching to second lanes, and marginal distance for safety have been considered. Second, the calculation of the exit section was done by comparing and analyzing the distance between cars of the entrance section according to the investigation point and the distance considering the location of crosswalks, the behavior of exit vehicles and the length of vehicles. In conclusion, by presenting the proper length in consideration of the traffic operation and safety on the access not-permitted section within complex areas, it can be used as a traffic safety improvement alternative and will be contributed in establishing and operating the proper installation criteria for the access not-permitted section within complex areas.

• Progress in Medical Physics
• /
• v.25 no.1
• /
• pp.53-63
• /
• 2014

The objective of this study is to investigate the difference of ITV lengths and ITVs between 4DCT and Slow-CT images according to respiratory patterns using a respiratory motion phantom. The respiratory periods 1~4 s and target motion 1~3 cm were applied on each respiratory pattern. 4DCT and Slow-CT images were acquired for 3 times. 4DCT and Slow-CT ITVs were measured with contouring the target in the Eclipse RTP system. The measured ITV lenghts and ITVs in 4DCT and Slow-CT images were compared to the known values. For the ITV lengths and ITVs in the 4DCT, the difference of them were reduced as the respiratory period is longer and target motion is shorter. For the Slow-CT, there was same tendency with change in 4DCT ITV lengths and ITVs about target motion. However, the difference of ITV lengths and ITVs for the respiratory periods were the lowest in respiratory period 1 second and different slightly within respiratory period 2-4 seconds. According to the respiratory patterns, pattern A had the highest reproducibility. Pattern B, C and D were showed the difference similar to each other. However, for pattern E, the reproducibility was the lowest compared with other four patterns. The difference of ITV lengths and ITVs between Slow-CT and 4DCT was increased by increasing the respiratory periods and target motion for all respiratory patterns. When the difference of Slow-CT ITV lengths and ITVs were compared with that of 4DCT ITV lengths and ITVs, Slow-CT ITV lengths and ITVs were approximately 22 % smaller than 4DCT, and the representations of target were different in each pattern. In case of pattern A, B and C, length difference was 3 mm at S (superior) and I (inferior) direction, and the length difference of pattern D was 1.45 cm at only "I" direction whereas the length difference of pattern E was 5 mm longer in "S" direction than "I" direction. Therefore, the margin in SI directions should be determined by considering the respiratory patterns when the margin of Slow-CT is compensated for 4DCT ITV lengths. Afterward, we think that the result of this study will be useful to analyze the ITV lengths and ITVs from the CT images on the basis of the patient respiratory signals.

• Journal of the Korean Home Economics Association
• /
• v.24 no.2
• /
• pp.1-11
• /
• 1986

The subject, in the blouses that sleeve caps and sleeve lengthes are different from, did sensory test by right arm movement and both arms movement. This sensory test which is used in fabric good, is Shef's. RESULTS : 1) The ease of bust size is very significant by cap height, at 5%, 1% level by sleeve length. 2) The front area of arm hole is affected by cap height, sleeve length movements more than the back and the under area of arm hole are 3) Sleeve width is affected by cap height, sleeve length both arms movement. That is, they should be designed according to the use because they affect the ease of blouse very much. Especially bust size should be considered with sleeve pattern because the ease bust becomes different with sleeve pattern.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.323-325
• /
• 2005

경제성장에 따른 인구의 집중화 및 도시기능의 고도화에 따라 전력기술분야의 많은 변화를 요구하게 되었다. 좁은 지역에 대용량의 전력을 안정적으로 공급하면서 환경과의 조화를 이루기 위하여 SF6개스를 이용한 개스절연개폐기(GIS)의 이용이 증가하였다. 이 논문에서는 중동국가에서 많이 건설되고있는 400kV 개스절연 변전소의 절연협조를 위하여 일반적으로 변전소 뇌과전압에 영향을 미치는 요소인 모선형태 및 구성, 피뢰기의 위치와 설치대수, 피뢰기의 제한 전압-전류특성, 모선의 길이, 피뢰기와 피보호기간의 이격거리 등을 고려하여 뇌침입시 변전소의 뇌과전압을 EMTP로 모의하여 개스절연변전소의 기기 절연강도를 결정하였다. 결정된 절연강도는 위의 모의결과로 얻어지는 발생예상 전압에 적정한 여유를 두고 IEC규격을 따라 선정하였다.

• Electrical & Electronic Materials
• /
• v.5 no.3
• /
• pp.320-327
• /
• 1992

Twin-tub CMOS 공정에 의해 제작된 서브마이크로미터 채널길이를 갖는 n채널 및 p채널 MOSFET의 특성을 고찰하였다. n채널 및 p채널 영역에서의 불순물 프로파일과 채널 이온주입 조건에 따른 문턱전압의 의존성 및 퍼텐셜 분포를 SUPREM-II와 MINIMOS 4.0을 사용하여 시뮬레이션하였다. 문턱전압 조정을 위한 counter-doped 보론 이온주입에 의해 p채널 MOSFET는 표면에서 대략 0.15.mu.m의 깊이에서 매몰채널이 형성되었다. 각 소자의 측정 결과, 3.3[V] 구동을 위한 충분한 여유를 갖는 양호한 드레인 포화 특성과 0.2[V]이하의 문턱전압 shift를 갖는 최소화된 짧은 채널 효과, 10[V]이상의 높은 펀치쓰루 전압과 브레이크다운 전압, 낮은 subthreshold 값을 얻었다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.07a
• /
• pp.34-35
• /
• 2005

Eye Glass Display(EGD)에 사용되는 광학계를 비구면과 Diffractive Optical Element(DOC)를 이용한 플라스틱 렌즈로 구성하여 소형, 경량으로 제작이 가능하게 설계하였다. 비구면과 DOE를 최적화한 1매의 렌즈로 광학계를 구성하여 display의 길이를 줄이고, 왜곡과 색수차를 보정하며 해상력을 향상 시켰다. 더불어, 광학계는 안경 착용자가 불편하지 않을 정도의 eye relief와 눈의 움직임에 여유를 가질 수 있는 크기의 eye motion box(exit pupil)를 가진다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.781-783
• /
• 2005

ARM 프로세서는 내장형 시스템에서 가장 널리 사용되는 32비트 마이크로 프로세서 중 하나이며, Thumb 명령어 세트는 보다 작은 코드 크기를 위해 제공하는 16비트 확장 명령어 세트이다. Thumb의 약점중의 하나는 줄어든 명령어 길이 때문에 이용할 수 있는 레지스터의 개수가 반으로 줄어든다는 것인데 결과적으로 가용 레지스터의 부족으로 인해 spill 코드가 빈번하게 발생할 수 있다. 우리는 약간의 하드웨어 및 명령어 수정을 통해 뱅크(bank)로 이루어진 레지스터 파일을 제공하고자 한다. 이로 인해 컴파일러는 보다 여유 있는 레지스터를 확보하게 되어 spill 코드가 줄어들게 되므로 보다 작은 크기의 코드를 얻어낼 수 있다. 이 변화된 형태의 레지스터 파일을 운용하기 위한 효율적인 레지스터 할당기법이 요구되며, 제안하는 영역기반 레지스터 할당기법을 통해 이이 최적화된 Thumb 코드 대비 약 $5.1\%$의 코드 크기 감소효과를 볼 수 있었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.2
• /
• pp.94-102
• /
• 2013

In this study, numerical modeling was performed to investigate influence of the apron shape on the discharge performance of the sluice for tidal power plant. The numerical modeling was carried out for comparison of the difference in the discharge coefficient when the apron width, slope, and the length of the horizontal section were different, without considering change in the shape of the sluice caisson itself. The modeling result showed that significant discrepancy in terms of the overall discharge performance appeared according to the apron geometry. In order to achieve maximum discharge performance of the sluice caisson, it is desirable to make the design by putting a space equivalent to the width of the sluice caisson on its both sides, by making the apron slope be 1:5, and by keeping length of the horizontal section to be 50 m that is corresponding to the streamwise length of the sluice caisson.