• Title/Summary/Keyword: 엔진 제어시스템

Search Result 534, Processing Time 0.032 seconds

A Summary on the System for Drilling Drillship (특수선 Drilling Drillship System 개요)

  • Kim, Deok-Ki
    • Proceedings of the Korean Society of Marine Engineers Conference
    • /
    • 2006.06a
    • /
    • pp.229-230
    • /
    • 2006
  • 해상플랫폼설치가 불가능한 심해지역이나 파도가 심한 해상에서 원유를 발굴하는 선박형태의 시추설비인데, 심해에서의 시추능력은 물론 기동성까지 겸비한 고부가치선으로서 최근 고(高)유가에 따라 발주가 늘어나고 있는 해양분야의 대표적인 성장엔진으로, 파도와 바람이 심한 해상에서도 안정적 시추가 가능한 최첨단 자동위치 제어시스템, 드릴링장비, 통합제어시스템 등, 드릴쉽이 갖추고 있는 시스템에 대해 간단히 설명한다.

  • PDF

Engine torque and engine/automatic trandmission speed control systems using time delay control (시간지연 제어를 이용한 엔진 토크 및 엔진/자동변속기 속도 제어 시스템)

  • Song, Jae-Bok;Lee, Seung-Man
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.2 no.2
    • /
    • pp.81-87
    • /
    • 1996
  • Time delay control(TDC) law has been recently suggested as an effective control technique for nonlinear time-varying systems with uncertain dynamics and/or unpredictable disturbances. This paper focuses on the applications of the TDC algorithm to torque control of an engine system and speed control of an engine/automatic transmission system. Through the stability analysis of the engien system based on TDC, determination of the appropriate time delay and control factor is investigated. It was revealed that the size of time delay of the TDC law should be greater than that of transport delay of the system for both stability and better control performance. Simulation and experimental results for the engine torque control and engine/automatic transmission speed control systems show both relatively good command following and disturbance rejection properties. However, TDC controller shows rather slow responses when applied to the system with large transport delay.

  • PDF

Development of the Integrated Control Unit for Small CHP Gas Engine Generator (소형 열병합 가스엔진 발전 시스템의 통합 제어장치 개발)

  • Cho, Chang-Hee;Kim, Seul-Ki;Jeon, Jin-Hong;Ahn, Jong-Bo;Kim, Sung-Shin
    • Proceedings of the KIEE Conference
    • /
    • 2006.07a
    • /
    • pp.539-540
    • /
    • 2006
  • 소형 열병합 (CHP, Combined Heat & Power)은 발전 용량이 1MW 이하인 발전 시스템을 지칭하는 용어로, 전기와 더불어 원동기에서 발생한 폐열을 회수하여 사용한 수 있는 발전 시스템을 말한다. 대표적인 원동기로서는 가스 엔진, 터빈, 마이크로 터빈, 연료 전지 등이 있다. 소형 열병합 시스템은 폐열 회수의 특징으로 기존 시스템에 비해 50% 이상의 에너지 이용 효율이 높으며, 기존의 대형 발전 시스템에서 필연적으로 존재하는 송전 및 배전 손실이 존재하지 않는 수요지 발전의 특징도 갖고 있어서 연료 절약형 에너지 생산 시스템으로서의 높은 가치를 가지고 있다. 또 다른 장점으로 열병합 발전 시스템은 여름철의 최대 전력 부하를 제거하는 역할을 할 수 있음으로 국가 전력 수요 공급의 안정화에 기여하는 바가 크다. 본 논문에서는 최근에 개발된 325kW급 열병합 가스엔진 발전 시스템의 주제어를 담당하는 통합 제어 장치의 개발과 소형 열병합 시스템의 시험 결과에 대해서 소개한다.

  • PDF

A Design Control System of Hybrid Underwater Glider and Performance Test (하이브리드 수중 글라이더의 제어 시스템 설계 및 성능 시험)

  • Ji, Dae-hyeong;Choi, Hyeung-sik;Kim, Joon-young;Jung, Dong-wook;Jeong, Seong-hoon
    • Journal of Advanced Navigation Technology
    • /
    • v.21 no.1
    • /
    • pp.21-29
    • /
    • 2017
  • In this paper, we studied the control of the hybrid underwater glider (HUG), which has the advantage of high precision route search function and long-term mission capability. Dynamic modeling of HUG is based on numerical model of the attitude controller and buoyancy engine, thruster. We designed the control part considering the smooth control and precise sailing of HUG. A buoyancy engine capable of inhaling water is designed to control the buoyancy of HUG. And mass shifter carrying the battery was designed for controlling pitching motion of HUG. A control system for controlling the buoyancy engine and the attitude controller was constructed. In order to verify performance, we performed water tank test using manufactured HUG.

Current Status of Development Test of 75 tonf Engine System for KSLV-II (한국형발사체 75톤급 엔진 개발 시험 현황)

  • Kim, SeungHan;Kim, SeungRyong;Kim, SungHyuk;Kim, ChaeHyung;Seo, DaeBan;Woo, SeongPil;Yu, ByungIl;So, YoonSeok;Lee, KwangJin;Lee, SeungJae;Lee, JungHo;Lim, JiHyuk;Jeon, JunSoo;Cho, NamKyung;Hwang, ChangHwan;Park, Jea-Young;Han, YeongMin
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2017.05a
    • /
    • pp.99-103
    • /
    • 2017
  • As a development test of the 75-tonf LOx/Kerosene liquid rocket engine for KSLV-II first Stage Engine, hot firing test of 75-tonf engine are performed. The current status of development test on first stage 75-tonf engine system including combustion chamber, turbopump, gas generator, propellant supply system are presented. During the 75tonf engine test campaign, the development of startup sequence of LOx-Kerosene engine system, engine startup using pyrostarter, ignition of gas generator, steady operation and engine shutdown is successfully performed. As a passenger test during engine hot firing tests, Thrust Vector Control system (TVC) of the engine are also evaluated during engine hot firing test. The results of hot firing test of 75-tonf thrust engine system will be used for the design confirmation and performance evaluation of 75 tonf engine system for KSLV-II first Stage.

  • PDF

자동차 화재 감지시스템 기술개발에 관한 연구

  • An, Hyung-Il;Jung, Ki-Chang;Kim, Eung-Sik;Kim, Hong
    • Proceedings of the Korean Institute of Industrial Safety Conference
    • /
    • 1998.05a
    • /
    • pp.241-244
    • /
    • 1998
  • 최근에 이르러 자동차 화재는 일반화재 보다 높은 연평균 16.5%의 증가율을 나타내며, 전체 화재 건수의 17%로 주택 및 아파트 다음으로 화재 발생 건수가 많다. 자동차 화재는 엔진과열, 전기장치의 불량, 전자 제어화에 따른 각종 감지기의 연결상태 및 기능 불량, 교통사고로 인한 엔진의 파괴 및 연료 누출등이 원인이 되고 있으며, 주로 엔진룸에서 화재가 발생하여 차량 내부로 전파되는 특징이 있다. 따라서 화재 발생 초기에 화재를 감지하여 운전자에게 경보를 발하고, 화재를 진압할 수 있는 자동차 화재 감지시스템의 개발이 중요해 지고 있다. (중략)

  • PDF

Text-dependent Speaker Verification System in SVAPI 1.0 Environment (SVAPI 1.0 환경에서의 어구 종속 화자 확인 시스템)

  • 김유진
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • 1998.08a
    • /
    • pp.401-405
    • /
    • 1998
  • SVAPI 1.0 환경에서의 어구 종속 화자 확인 시스템에 대해 기술한다. 구현된 시스템은 궁극적으로 공중 전화망 응용이 가능한 실용 시스템을 목표로 개발되었으며 이를 위해 SVAPI 위원회에 의해 제안된 SVAPI 1.0을 개발 환경으로 사용하였다. SVAPI는 객체 지향 구조, 클라이언트-서버 및 telephony 환경의 지원등이 특징이며 어플리케이션과 엔진을 독립적으로 개발할 수 있는 이점을 제공한다. 구현된 데모 시스템은 펜티엄 프로세서와 Windows95/NT 4.0 운영체제 그리고 Win16/Win32 API를 통해 제어 가능하며 음성 입력이 가능한 디바이스를 장착한 IBM 호환 PC이다. 화자의 성문 등록은 화자가 동일한 어구를 3회 발성하여 이뤄지며 등록과 확인의 응답속도는 모두 1초 이내이다. 소프트웨어의 구성은 크게 어플리케이션과 어구 종속 화자 확인 엔진으로 구분할 수 있으며 엔진은 끝점 검출 알고리즘, 음성 특징 추출 알고리즘 그리고 연속 HMM 기반의 화자 성문 모델 등록 및 유사도 계산 등을 포함한 확인 알고리즘으로 구성되어 있다. 화자의 성문은이름과 같은 약 3음절 이상의 단어로 등록되고 테스트되었다. 엔진의 객관적인 평가를 위해 전화선을 통해 남자 6명, 여자 3명의 화자로부터 자신의 이름을 각각 40회 발성하여 구축된 음성 데이터 베이스를 사용하였으며 실험 결과 남자는 2.85%, 여자는 2.44%의 EER을 각각 얻었다.

  • PDF

The Design of a Hybrid Engine System Based on a Reciprocal Engine For Unmanned Aerial Vehicles (내연기관 기반 드론용 하이브리드 엔진 시스템 설계)

  • Gang, Byeong Gyu;Kim, Keun-Bae
    • Journal of Aerospace System Engineering
    • /
    • v.14 no.5
    • /
    • pp.42-48
    • /
    • 2020
  • This research illustrates how the hybrid engine system comprising of a two-cycle reciprocal engine with an integrated generator and a battery is prepared for the design process. The purpose of this research is to increase flight endurance taking advantage of the high energy density of hybrid propulsion systems as well as to cope with current environmental issues by reducing fossil fuel. The hybrid system is designed to offer 6 kW power, and the power can be adjusted by controlling the engine's RPM in accordance with load variations. In addition, the battery is adopted to offer extra electric power that this hybrid system cannot cover, and can function as the main power source in limited time in the case of an emergency situation. Besides that, the generator is directly mounted on an engine crank-shaft, and in turn, they can share the same RPM. Thus, it is hypothesized that this integration method can make a compact design possible by reducing space for the installation in the fuselage of UAVs.

A study on flexible manufacturing system for engine cylinder block (엔진 실린더 블럭 가공라인의 자동화 시스템에 관한 연구)

  • 전용철;윤병용;홍동표
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1986.10a
    • /
    • pp.544-546
    • /
    • 1986
  • In this report, we have designed a Flexible Manufacturing System(FMS) for Engine-Cylinder block that is composed of maching center, special purpose machine, AGV(Automatic Guided Vehicle), using Micro-Computer and Programmable Controller(PC). From this report, we mostly present hardware features and scheduling software.

  • PDF