• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.126-133
• /
• 2006

This paper deals with technological and design skills for all pneumatical, hydraulical, mechanical and electrical parts related to control valve. Especially, a variety of dynamic characteristics, which are not easily extracted from field tests using control valves, are studied by system-simulation code, AMESim. The simulated results are also compared and examined with actual testing results in terms of physical dynamic characteristics. In addition, this paper contains the simulated system characteristics including dynamic characteristics in component level of valve itself. Based on the results, it is applied to control system of propellant feeding system in liquid-propellant engine of satellite launcher.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.27-32
• /
• 2010

Performance test of a full-scale turbopump assembly for a 75 ton class liquid rocket engine was carried out at full speed. Model fluid was used as a working medium: liquid nitrogen for the oxidizer pump, water for the fuel pump, and hot air for the turbine. The turbopump was operated stably, satisfying the performance requirements. Head coefficient and flow coefficient of the pumps remained constant at the speed-increasing period. In terms of performance characteristics of pumps and turbine, the results from the turbopump assembly test showed a good agreement with those from the turbopump component tests.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.4
• /
• pp.76-83
• /
• 2004

A Propulsion System of the CRW(Canard Rotor Wing) type UAV(Unmanned Aerial Vehicle) was composed of the turbojet engine to generate the propulsive exhaust gas, and the duct system including main and rotary ducts, the nozzle subsystem including main and tip jet nozzle for three flight modes such as lift/landing mode, low speed transition flight mode and high speed forward flight mode. Transient simulation performance utilized the ICV (Inter-component volume) method and simulated using the SIMULINK. Transient performance analysis was performed on 3 cases. Fuel flow schedules to accelerate from Idle to maximum rotational speed were divided into the step increase of the most severe case and ramp increase cases to avoid the overshoot of turbine inlet temperature, and variations of thrust and the turbine inlet temperature were investigated in some transient analysis cases.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.251-254
• /
• 2004

Hybrid rockets have many advantages over solid and liquid rockets. Hybrid rockets put forth high $I_{sp}$ like liquid rockets in spite of simple structure and low cost. As oxidizer flow rate is increased, thrust of hybrid rocket is increased accordingly. In this study, lab-scale hybrid rocket is designed, fabricated and tested. This system consists of lab-scale hybrid rocket motor, ignition system, flow system and data aquisition system. In order to control oxidizer flow rate, we construct flow rate control system by using needle valve and stepping motor.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.98-106
• /
• 2000

A conceptual design of propulsion system for a geosynchronous communication satellite with 12 years design life is presented in this paper. Propellant mass budget for the design life is calculated using total velocity increment ($\Delta$V) flowed-down from mission requirement analysis. Sizes of the fuel and oxidizer tank are derived based on the calculated propellant mass budget, and mass of the pressurant as well as the size and Pressure of pressurant tank are calculated too. Thruster positioning, number of rocket engines, and position of tank are determined through trade-off study with Structure & Mechanical Subsystem. Propulsion system configuration and its schematics are presented finally.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.211-214
• /
• 2011

In the present work, a computational study was conducted to investigate characteristic of lateral force on the flow fields inside the propulsion nozzle with step. The unsteady, compressible, axisymmetric, Navier-Stocks equations with SST k-${\omega}$ turbulence model are solved using a fully implicit finite volume scheme. In order to simulate the shut-down process of the engine, NPR is varied from 100.0 to 10.0. It is observed that the separation point and Mach-disk strongly depend on the variation of NPR, and adjusting the step lead to significantly different characteristics in the lateral forces.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.73-80
• /
• 2018

At the early stages of development of high-speed propulsion systems, associated uncertainties cannot be easily modeled into probabilistic distributions, owing to the lack of test data, cost, and difficulty of simulating real-flight environments on the ground. To tackle this issue, in this research, the combustion efficiencies of dual-combustion ramjet engines are assumed to have been provided by experts and quantified by evidence theory. Using quantified uncertainty, the inlet area and combustor exit are optimized while satisfying reliability margins of thrust and thermal choking. The result shows a reasonable design of the engine under uncertain circumstances.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.241-242
• /
• 2019

본 논문에서는 기존의 드론의 문제점을 보완하기 위한 모델을 제안한다. 기존 드론들의 태생적인 프로펠러 사용으로 인해 안전사고의 위험성, 프로펠러 파손으로 인한 소모성, 비행을 위한 프로펠러의 소음 등의 한계를 근본적으로 제거하여 단점을 최소화하고 성능의 감소를 최소화하여 차세대 드론모델의 한 방법을 제시한다. Bladeless fan 의 원리를 이용하여 프로펠러를 내부로 이동시키고, 하나로 줄임으로써 상승하는 안정성, 소모성, 장소의 제약을 해소할 수 있게 한 후에, 터보 팬 엔진의 원리를 이용한 공기의 압축과 내부 유속의 상승을 이용하여 내부의 순환 바람으로 인한 서브 날개의 바람 출력 상승을 시켜, 기존 드론의 추력을 얻게 하고 단점을 보완하게 한다. 본 논문에서는 기존 드론의 단점을 보완한 모델로써, 기존 드론과 같은 역할을 수행할 수 있고 장소의 제약, 상해사고의 위험성, 프로펠러의 소모성 면에서 효과적으로 우수함을 보인다.

• Journal of Aerospace System Engineering
• /
• v.15 no.1
• /
• pp.32-39
• /
• 2021

Electric propulsion aircraft are being actively researched in the aviation field in recent years to solve environmental and noise problems caused by existing gas turbine engine. In particular, research on a thrust motor as a core component of an electric power propulsion system and an inverter for driving it is actively being conducted. In this paper, a motor with high specific power is selected to determine characteristics of aircraft that are sensitive to weight and volume. Power loss of the inverter is then simulated. In the simulation, the selected motor and power device were modeled using PSIM, a power electronics analysis tool. Inverter power loss according to switching frequency was then analyzed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.419-426
• /
• 2018

For an orbit transfer in a space exploration mission, a solid or liquid rocket booster is included at the last stage of the launch vehicle. During the orbit transfer, thrust misalignment can cause a severe orbit error. Three axis attitude control or spin stabilization can be implemented to minimize the error. Spin stabilization technique has advantages in structural simplicity and lightness. One of ways to apply the spin stabilization to the payload is to include a spin table system in the launch vehicle. In this paper, effect of the spin table system on separation dynamics of the payload is analyzed. Simple model of the spin table to mimic basic functions is designed and simulation environment is established with the model. Effect of the spin table is tested by evaluating separation dynamics of a payload with and without the spin table. Analysis on tolerance effect of separation spring constant on separation dynamics of a payload is conducted.