• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.476-481
• /
• 2013

Ethylbenzene (EB) which has a similar physical properties with p-xylene (pX) was separated from EB/pX mixture by using MFI-type zeolite (TS-1, ZSM-5, and Silicalite-1) coated membranes. The zeolites were synthesized by microwave method to reduce the synthesis time and uniformly formed zeolite particles were coated on the ${\alpha}$-almina tubular support with a thickness of $3-4{\mu}m$. Separation factor and permeation flux of the synthesized zeolite coated membranes were measured to survey the best performance of ethylbenzene separation from different composition of EB/pX mixtures. When the EB/pX mixture of 5:5 molar ratio applied for the separation experiment, it represented the highest separation factor. We also have studied about the effect of the atomic composition of zeolites on the separation performance within the temperature range from 160 to $220^{\circ}C$. TS-1 showed the highest permeation flux of $1,666mol/m^{2*}s^*Pa$ and Silicate-1 showed the highest separation factor of 1.73 at $200^{\circ}C$ respectively.

• 대한예방의학회:학술대회논문집
• /
• 1999.10a
• /
• pp.191-192
• /
• 1999

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.61-68
• /
• 2010

In this study, we investigated the concentrations of volatile organic compounds (VOCs) in Shiwha area and compared the characteristics of both industrial area and residential area. The passive samplers were set 6 times each for a month in 21 locations at industrial and residential area to obtain 6 VOCs including benzene, trichlorobenzene, toluene, ethyl benzene, xylene and stylene. Above all, toluene was the most abundant VOCs in the ambient air both in industrial and residential area. Average TVOC concentration of industrial area was 1.86 times higher than that of residential area, and it was greatly reduced in winter compared with summer. Furthermore, the average BTEX concentrations showed that all concentrations of industrial area were 1.94~5.39 times higher than those of residential area except benzene which were similar to each other. In winter, the concentration of ethyl benzene and xylene were significantly decreased by comparing with summer: but benzene concentrations were increased. Also, BTEX relative ratio was as follows: toluene>benzene>ethylbenzene>xylene. Correlation coefficients among VOCs were confirmed that VOCs in ambient air of industrial area were generally more related to each other than that of residential area. On the whole, the concentrations of VOCs in industrial area were higher, and it seems to be potential that industrial area affects the distribution of VOCs to residential area.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.321-326
• /
• 2006

Thermal degradation of styrene dimer fraction (SDF, main compound: 47 wt% of 1,3-diphenylpropane), 5~15% of total products produced during decomposition of waste expanded polystyrene (WEPS) was investigated. Reaction condition of $360^{\circ}C$, and 152 kPa to 202 kPa was an optimum for high pressure degradation. Under this operating condition, the yield of oil was 73.8% and the selectivities to Ben, Tol, EB, SM, and AMS were 0.4, 30.9, 15.0, 19.6, and 4.2%, respectively. Non-catalytic fixed bed continuous degradation was conducted at reaction temperatures of $510{\sim}610^{\circ}C$ and contact time ranges of 2~24 min, where the yield was increased by increasing of reaction temperature and contact time. A $Cr_2O_3$ catalyst showed the highest activity and SM yield among acid, base, and redox catalysts. The conversion of 74.6% and the yield of Ben, Tol, EB, SM, and AMS were 0.4, 21.6, 9.7, 17.9, and 3.5%, respectively at $560^{\circ}C$ and contact time of 24 min. It is thought that styrene is converted to EB and other secondary products throughout the formation of diradicals of styrene.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.10
• /
• pp.5-12
• /
• 2022

In this study, we investigated the UV/H₂O₂ process to treat organic compound-spilled water. In consideration of usage and properties, benzene, toluene, phenol, and methyl ethyl ketone were selected as representative organic compounds. The selected material was first removed by natural volatilization and aeration that simulated the pretreatment of the prcoess. After that, UV/H₂O₂ oxidation experiments were conducted under various H₂O₂ concentration conditions. Benzene and toluene were mostly volatilized before reaching the oxidation process due to high volatility. Considering the volatility, oxidation experiments were performed at an initial concentration of 5 mg/L for benzene and toluene. The UV/H₂O₂ oxidation process achieved 100% of benzene and toluene removal after 20 minutes under all hydrogen peroxide concentration conditions. The phenol was rarely removed from the volatile experiments and oxidation tests were performed at an initial concentration of 50 mg/L. The process showed 100 % phenol removal after 30 minutes under 0.12 v/v% of hydrogen peroxide concentration condition. Methyl ethyl ketone was removed 58 % after 2 hours of volatile experiments. The process showed 99.7% Methyl ethyl ketone removal after 40 minutes under 0.08 v/v% of hydrogen peroxide concentration condition. It was confirmed that the UV/H₂O₂ process showed high decomposition efficiency for the four selected organic compounds, and identified the amount of hydrogen peroxide in classified organic contaminants.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2016.10a
• /
• pp.123-123
• /
• 2016

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2016.10a
• /
• pp.58-58
• /
• 2016

• Journal of Food Hygiene and Safety
• /
• v.25 no.3
• /
• pp.203-208
• /
• 2010

In this study, the level of migration of 5 kinds of volatile organic compounds (VOCs) (toluene, styrene, ethylbenzene, isopropylbenzene and n-propylbenzene) into distilled water from polystyrene-made food containers was measured using Purge&Trap combined with GC/FID. The contents of the VOCs which have regulatory limits in Korea food code only for material specification were determined under three exposure conditions which were 30 min at $60^{\circ}C$, 30 min at $95^{\circ}C$ and actual situation of instant noodle intake. The calibration curve of 5 compounds showed good linearity ($^r2$ = 0.9976~0.9995) within the concentration range of 1~50 ng/mL. The limit of detection (LOD) and limit of quantification (LOQ) were validated at range of 0.041~0.092 and 0.135~0.304 ng/mL, respectively. The average migration contents of 5 compounds were below 5 ng/mL except for styrene. The average contents of styrene were highly detected at $95^{\circ}C$ for 30 min exposure (52.71 ng/mL). Under actual condition at instant noodle intake, the average contents of styrene was 17.23 ng/mL. The results demonstrated that the migration rate of VOCs was related to storage temperature and time.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.6
• /
• pp.103-116
• /
• 2002

The development of contaminated sites often requires foundation concrete to be placed in contact with soils contaminated with organic compounds. There is a common perception that organic compounds affect the setting and hardening of concrete, giving a reduced long-term strength. In this study, unconfined compressive strength tests for concrete cured in Ethylbenzene were performed. The possibility of byproduct to be used for aggregate of concretes as materials of construction was also evaluated by carring out the investigation of the characteristics of the mixture of concrete and crushed oyster shell which is treated as waste material and often illegally disposed at coastal oyster production site. The transformation of strength characteristics was investigated by varying the blending ratio of fly ash.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.125-128
• /
• 2005

Oil formation rate, composition of crude oil and formation of side products such as ${\alpha}-methyl$ styrene, ethyl benzene, benzene, toluene, dimer and trimer on thermal degradation of polystyrene were affected by various factors. Especially, formation of organic residue formed during reaction gave an important influence on formation of oil and composition of crude oil. Also, composition of formed crude oil showed a significant difference on reaction time. These results were caused by organic residue and carbonized solid formed during continuous reaction. Increase of residue and carbonized solid gave a decrease of yield of styrene and an increase of formation of ${\alpha}-methyl$ styrene, ethyl benzene, benzene, toluene. New reaction system was proposed for continuous operation at the thermal degradation of polystyrene.