• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.855-865
• /
• 1999

This paper presents the improvement of BER performance using fading compensation method for 16 QAM-TCM to reduce the effects of multi-path fading in mobile radio environments. We propose the multi-pilot symbol aided fading compensation technique using Gausian interpolation method for inter-symbol interference or fading distortion occured in frequency selective fading channel. The proposed system is combined coding and modulation scheme for improving the reliability of a digital transmission system without increasing the transmitted power or the required bandwidth. In the fading compensation, the pilot symbols from a known sequence is multiplexed into the data symbols at regular intervals to from a frames for transmission. And we use a modified bit reversal block interleaver to randomize burst errors. The results show that significant improvements in the bit-error rate performances can be achieved by the proposed techniques.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.109-120
• /
• 2005

In this paper, bit error rate (BER) characteristics, sensitivity and minimum allowable launching power are numerically investigated as a function of amplifier spacing that consisted of 1,200 km WDM systems with MSSI method. It is conformed that the sensitivity and minimum allowable launching power are gradually degraded as amplifier spacings are gradually expanded, but those are not largely affected by modulation format. The sensitivity of RZ transmission system is smaller than that of NRZ transmission system, but minimum allowable launching power of NRZ transmission system is smaller than that of RZ transmission system. And, it is confirmed that the best amplifier spacing in NRZ and RZ transmission system is less than 50 km, because the sensitivity and minimum allowable launching power are less affected by fiber dispersion, channel wavelength and pump light power.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1706-1715
• /
• 1996

The decision feedback equalizer(DFE) received recent attention since it can compensate for channels with severe intersymbol interference(ISI) without as much noise enhancement as the linear equalizer(LE). In this paper, we propose a new DFE which can icrease the performance of DFE further by using error feedback. The performance increase is achieved by reducing correlation of error signal, which cannot be reduced by the feedforward or feedback filter. Hardware complexity for the proposed approcach is minimal since it requires only additional few taps to the conventional DFE. Based on theoretical analysis and computer simulations, the proposed approach is shown to be much more effective than the conventional DFE, especially for channels with large ISI.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.4
• /
• pp.39-47
• /
• 2020

We propose a multi-access points transmit power control algorithm in consideration of the channel estimation error and the multi-rate service. In the real communication systems, the channel estimation at the receiver side is imperfect due to limited number of pilot symbol usage. Furthermore, the multi-rate service is supported. We theoretically prove the uniqueness and the convergence of the proposed algorithm in multi-rate service environment. The proposed algorithm composes of one inner loop part and one outer loop part. Simulation results show that 1) the inner loop algorithm guarantees convergence of the transmit power level and the multi-rate service, 2) the outer loop algorithm compensates for the channel estimation error.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.188-198
• /
• 2000

As MPEG-2 is introduced, a new editing system that works at the compressed domain is required. It is efficient to paste the two different video sequences in the compressed domain, but after repeated pasting, the result sequence can violate MPEG-2 rate control algorithm. In other words, it causes the underflow of the buffer during the decoding time. The earlier study inserted an additional fade-in sequence but it is not natural when we make a program. In this paper, a nobel method using requantization of the underflow sequence is presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7B
• /
• pp.1153-1166
• /
• 2000

본 논문에서는 무선 ATM(Asynchronous Transfer Mode) 접속망에서 무선링크를 통한 랜덤 ATM 데이터의 전송시 ATM 셀손실율을 정량적으로 분석하였으며 유선 ATM환경보다 무선 ATMghksurd에서 셀손실율이 더 높다는 것을 확인하였다. 무선 ATM접속망에서 ATM기술을 무선링크에 적용하는 경우에 Rayleigh 및 Rician 페이딩 채널특성, 전력제한, 단일 및 버스트 에러로 인해 유선링크에서 보다 상당한 전송성능 열화가 발생하는 것은 필연적이며 이를 보상하기 위한 방안들이 강구되어야 한다. 따라서 본 논문에서는 이러한 무선채널의 전송성능 열화현상을 극복하기 위한 에러제어구조를 제시한 후 랜덤 트래픽에 적합한 FEC (Forward Error Correcting) 기법들의 적용방안을 검토한 후, 셀 손실율측면에서 성능을 비교분석하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10b
• /
• pp.541-543
• /
• 2000

영역의 수와 윤곽선의 길이는 세그멘테이션 기반의 움직임 보상된 비디오 코딩에서 두 가지의 기본적인 제약사항이다. 이 논문에서 제안하는 코딩 스킴은 영역의 수를 축소하는 것에 초점을 맞추고, 윤곽성 코딩, 그리고 치환된 프레임 차이(DFD)의 압축에 초점을 맞춘다. 제안된 스킴의 가장 중요한 특징 중의 하나는 형태적인 필터를 기반으로 하는 spatio-temporal 단순성 알고리즘이고, 그것들과 함께 이미지는 작은 수의 영역으로 나누어질 수 있다. 이 스킴의 매우 중요한 특성은 세그멘테이션 맵 샘플링 기법으로, 그것은 윤곽선 길이를 매우 작은 복원 에러에 비례하여 약 50%까지 줄인다. 실험적인 결과는, 높은 압축 비율에 대하여 매우 작은 코딩 에러를 보여주었다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.45-53
• /
• 2007

To recover transmitted signal perfectly at DTV receiver, we have to acquire carrier frequency synchronization to compensate pilot signal which located in wrong position and rotated phase. Also, we need a symbol timing synchronization to compensate sampling timing error. Conventionally, to synchronize symbol timing, we use Gardner's scheme which used in multi-level signal. Gardner's scheme is well known for its sampling the timing error signal from every symbol and it makes easy to detect and keep timing sync in multi-path channel. In this paper, to discuss the problem when the received power level is out of range and we cannot get synchronization information. With this problem, we use 2 step procedures. First, we put a received signal power compensation block before Garder's timing error detector. Second, adaptive loop filter to get a fast synchronization information and averaging loop filter's output value to reduce the amount of jitter after synchronization in PLL(Phased Locked Loop) circuit which is used to get a carrier frequency synchronization and symbol timing synchronization. Using the averaging value, we can estimate offset. Based on offset changing ratio, we can adapt adaptive loop filter to carrier frequency and symbol timing synchronization circuit.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.4
• /
• pp.263-268
• /
• 2007

It applied the linear tapped delay line structure to the least mean square algorithm and the recursive least square algorithm it investigated the mean square error characteristics of compensation algorithm. The purpose of this paper is to propose multi-tap update algorithm, which is superior to compensation capacity of data, and then compare and analyze it from the perspective of convergence characteristics at time invariant transmission channel and frequency selective fading channel.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.476-479
• /
• 1999

일반적으로 3상 PWM AC/DC 컨버터는 정상상태 에러 제거 및 빠른 과도응답 특성을 얻기 위해 동기 좌표계상으로 모델링하여 제어한다. 그러나 이와 같은 제어기는 입력전압이 평형일 경우를 전제조건으로 하므로, 입력전원이 불평형인 경우 입력전류와 출력전압에 고조파 성분이 나타나게 된다. 본 논문에서는 전원전압을 동기좌표계상의 정/역상 분으로 분석한 후 두 축(D, Q)의 역기전력 보상성분을 전원전압의 상태에 따라 적절하게 가변하고, 무효 전력과 고조파 전력 성분을 선택적으로 제거함으로써 입출력 시스템의 역률 및 고조파 성분을 효과적으로 보상하기 위한 간단하면서도 효과적인 제어기법을 제안하고, 시뮬레이션과 실험을 통하여 검증하였다.