• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4B
• /
• pp.174-183
• /
• 2008

In this paper we design and implement a sensor network management framework(SNMF) for ubiquitous sensor networks(USNs). The SNMF employs the policy-based management approach for the autonomous and energy-efficient management of USNs. Moreover, a new light-weight policy distribution protocol called TinyCOPS-PR is designed and USN PIB for low-level policy is also defined. This allows the high-level policies defined by an administrator to translate into the specific low-level policies. The low-level policies are executed on sensor nodes so it can fulfill the proper management actions. The sensor nodes that receive some policies from an administrator perform local management actions according to those policies. SNMF can therefore realize small energy consumption and bring long network lifetime. It can also manage USNs automatically with a minimum of human interference.

• Electrical & Electronic Materials
• /
• v.5 no.3
• /
• pp.284-294
• /
• 1992

합성용질확산법으로 GaP단결정을 성장시키고 몇가지 성질을 조사하였다. 정지상태에서 결정의 성장속도는 1.75[mm/day]이었고 결정성장용 석영관을 전기로내에서 하강시키므로써 양질의 GaP 단결정을 성장하였다. 에치피트밀도는 결정의 성장축 방향으로 3.8*$10^{4}$[$cm^{-2}$]부터 2.3*$10^{5}$[$cm^{-2}$] 까지 증가하였다. 성장된 GaP결정의 이동도와 캐리어농도는 실온에서 197.49[$cm^{2}$/V.sec]와 6.75*$10^{15}$[$cm^{-3}$]이었고 77K의 온도에서는 266.91[$cm^{2}$ /V.sec]와 3.13*$10^{14}$[$cm^{-3}$]이었다. 에너지갭의 온도의존성은 실험적으로 $E_{g}$(T)=2.3383-(6.082*$10^{-4}$) $T^{2}$/(373.096+T)[eV]로 구하여졌다. 저온에서 측정된 광루미네센스 스펙트럼은 구속된 여기자의 복사재결합과 재결합 과정에 포논의 참여로 인하여 에너지갭 부근의 복잡한 선 스펙트럼이 나타났고 얕은 준위의 Si도너와 Zn억셉터준위 사이에서의 복사재결합 및 이에 대한 1LO, 2LO의 포논복제가 나타났으며 S $i_{Ga}$ -S $i_{p}$의 쌍방출에 의하여 1.8932[eV]에서 넓은 반치전폭의 피크가 나타났다. GaP의 적외선 흡수는 TO, LO, LA, T $A_{1}$, T $A_{2}$ 포논들의 이중결합모드와 G $a_{2}$O의 진동모드 및 Si도너와 Zn억셉터들에 의하여 일어났다. Zn를 확산시키어 제작한 p-n GaP발광다이오드는 실온에서의 발광중심피크가 6250[.angs.]이었고 최대광출력은 0.0916[mW], 양자효율은 0.51%이었다.이었다.

• Solar Energy
• /
• v.16 no.2
• /
• pp.97-112
• /
• 1996

The purpose of research is to complement the circulating pump of gas boiler for the domestic and to develop a pump housing with internal three way valve: Housing and three way valve have been apart in the existing pump system. Based on the experimental result on can-typed circulating pump with existing housing, a new housing with internal three way valve was designed and manufactured. The performance of can-typed circulating pump with the new housing, and the performance of circulating pump of boiler system were tested. As a result ot the test, the new housing with internal three way valve has been excellent in respect of pump performance, weight and manufacturing cost. So It is expected to have an effect of import substitution.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.2
• /
• pp.129-135
• /
• 2020

The standardization of e-IoT (energy Internet of Things) communication and service, which is the energy field of energy, is to define the standard model and to demonstrate the practical model in order to take the lead and occupy the market where new market is created with the latest technology. In particular, detailed technical specifications are defined for developing a framework for IoT technology, the foundation technology of the 4th Industrial Revolution, securing interoperability through standardization, and operating a standard platform. In this paper, we propose a method for e-IoT standard protocol lightening and test certification procedure. The proposed method provides a product implementation method that can solve the problem of low power issue of e-IoT product in the future.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.8 no.2
• /
• pp.1-8
• /
• 2012

The G-class cement is usually used for geothermal well grouting to protect a steel casing which is equipped in a geothermal well to transfer geothermal water from deep subsurface to ground surface. In geothermal grouting process, obtaining appropriate fluidity is extremely important in order to fill cement grout flawlessly. In this paper, a series of the V-funnel and Slump Flow test was performed on both of the Portland cement and the G-class cement in order to compare fluidity and filling ability of those kind of cements. In the result of V-funnel test, the fluidity of G-class cement was evaluated much better than the Portland cement at the water/cement ratio of 0.8. In the case of Slump Flow test, the fluidity of G- class cement was estimated slightly better than the Portland cement at both the water/cement ratio of 0.55 and 0.8. Even though the initial fluidity and filling ability of G-class cement were relatively higher than the Portland cement, the results could be considerably changed with time. The results show that the fluidity and filling ability for geothermal well cementation can be properly controlled with water content and additives for adverse geothermal well environment.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.6
• /
• pp.16-21
• /
• 2010

It is well-known that Boron-doped Cz Si solar cells suffer light-induced degradation due to boron-oxygen defect which is responsible of a reduction in lifetime and hence efficiency. In this paper, we assume that PV solar cell has been connected with variable load to account the real operating condition and it shows different light-induced degradation of Si solar cell. To evaluate the effect of light-induced degradation for solar cell with various load, Single crystalline solar cells are connected with open and short circuits during light exposure. Isc-Voc curve evaluate light induced degradation of solar cells and the reason is explained as a change for serial resistance. From the results, Electrical characteristics of solar cells show better performance under short circuit conditions, after light exposure.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.2
• /
• pp.190-198
• /
• 1995

Many industrial servo amplifiers employ power transister as output device. Thyristor converters are not adopted to drive servo motor, although thyristor is superior to power TR in power rating, noise immunity, price, and size. The reason is, thyristor has no ability of self turn - off. Here in this paper line commutation, in which thyristor is turned off naturally since cathode voltage is higher than anode as time goes by, is employed to turn on thyristor with a delicate sequence. We developed thyristor servo amplifier which does not cause any damage on thyristor because it is designed to prevent triggering the two SCRs in the same arm simultaneously. And it was made clearly how to trigger SCR without any power line shorting and also harmonic analysis is carried out with the aid of FFT analyzer and proved that it can be used even severe reactive load. The designed circuit operated as a good DC amplifier in conventinal servomotor and the results can be use as a position control system application.

• Journal of Convergence for Information Technology
• /
• v.9 no.1
• /
• pp.19-27
• /
• 2019

In recent years, with the advancement of IT technology, we expect data size of the world to increase 10 times in 2025. The rapid development of this Internet technology leads to the downsizing of the server system of the data center which manages and operates the data, the capacity of the storage medium, and the power consumption of the data center. In this paper, we propose an energy conservation policy and analyze it in real time by analyzing the power consumption pattern of the server system of the data center. The proposed system can monitor and analyze the power consumption pattern of the individual server system in the data center, and it can be expected that about 10% of the total power consumption of the data center will be saved by efficiently managing the actual operation time of the server system.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.6
• /
• pp.215-219
• /
• 2020

After the specimen of A-site defect double Perovskite La1/3TaO3 single crystal was manufactured, the dielectric properties have been studied between the temperature range of 10 and 800 K. Under 500 K, a paraelectric behavior has been shown, and above 550 K, a dielectric anomaly and a thermal history of dielectric constant has been shown. An activation energy by measurement of ac-conductivity has been the largest with 1.83 eV in the areas below 560 K, 0.35 eV in the areas of 560~690 K, and 0.28 eV in the areas of high temperature above 690 K. From these results, it is assumed that in the areas below 500 K, La3+-ion and vacancy-site are arranged in disorder to maintain a paraelectric phase. And in the areas near 560 K with the highest activation energy, a dielectric anomaly is attributes to rearrangement of La3+-ion due to conduction to vacancy-site or jumping.

• Tunnel and Underground Space
• /
• v.32 no.3
• /
• pp.173-193
• /
• 2022

In this study, international standardization trend of smart mining technology was analyzed focusing on the guidelines developed by GMG (Global Mining Guidelines Group). GMG is a non-profit organization that unites the global mining community. It was established to promote mining safety, innovation and sustainability. Currently, GMG's working group consists of artificial intelligence, asset management, autonomous mining, cybersecurity, data access and usage/interoperability, the electric mine, mineral processing, underground mining, and sustainability. Guideline development projects related to smart mining technology are being conducted in artificial intelligence, autonomous mining, cybersecurity, data access and usage/interoperability, and underground mining. As of April 2022, eight types of smart mining-related guidelines have been published through pre-launch, launch, guideline definition, contents generation, technical editing/layout/final review, and voting process. It is judged that the GMG guidelines can be an important reference for the development of domestic smart mining technology standards.