• Journal of Korea Technology Innovation Society
• /
• v.13 no.4
• /
• pp.680-699
• /
• 2010

In this paper, we attempted to analysis and track dynamic properties of the interdisciplinary relationship between scientific research areas in energy field using bibliometric analysis. We created network maps with SCs (subject categories) defined from $WoS^{\circledR}$ (Web of Science, Thomson Scientific ISI, Philadelphia, USA) using co-occurrence analysis method in order to identify overall disciplines directly linked with energy fields and investigate the change of interaction between SCs as a function of time. From the results of this study, thermodynamics, fuels, chemistry/chemical engineering, and electrochemistry have differentiated into more specific disciplines while the strength of interaction with energy field gradually has increased. Meanwhile, "nuclear physics" was developed to "nuclear science & technology" toward applicable target sector and also the interaction of "environmental science" with "energy generation area" among various energy disciplines recently showed the radical increase as compared with the values of 4 years ago. Finally, through combinative reviews of today's energy policy established by South Korea government, this study will give a help for keeping up with national energy agenda meeting the diverse characteristics of academic disciplines of energy field. In addition, our results support that the use of such network analysis based on bibliometric analysis to discern shifts in academic R&D strategies and target sectors.

• Journal of Nutrition and Health
• /
• v.54 no.6
• /
• pp.573-583
• /
• 2021

Energy requirement is defined as energy expenditure in an energy equilibrium state. The doubly labeled water (DLW) method is considered the gold standard for measuring total energy expenditure (TEE). In 2002, the Institute of Medicine (IOM) of the National Academies established dietary reference intakes (DRIs) for Americans and Canadians, and the equations for estimated energy requirement (EER) were developed by using pooled data from studies that had applied the DLW method. Since 2005, these equations have been used for establishing EER in the DRI for Koreans. These equations based on age group include the physical activity (PA) coefficient determined by the PA level (PAL; sedentary, low active, active and very active) as well as body weight and height. The PAL values of Koreans calculated using the DLW method and PA diaries were determined to fall in the low active category (1.40~1.59). Therefore, the PA coefficient corresponding to 'low active' was applied to the EER equations. In recent years, with increasing number of people regularly engaging in various physical activities in Korea, EER is now separately presented for people with 'active' and 'very active' PALs. In the future, like the United States and Japan, Korea needs to expand the DLW research for developing EER predictive equations for Koreans. In addition, standardized guidelines should be prepared to accurately evaluate the PAL using the physical activity diary and the new PA classification table for Koreans.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.396-400
• /
• 1998

The physical properties of KLN single crystals very significantly according to the $Nb_2O_5$ content in grown crystal, therefore, it is very important to control the composition of KLN single crystals. In this study, KLN single crystals of high content $Nb_2O_5$ were grown by temperature fluctuation and TSSG (Top-seeded solution growth) methods with increasing the $Nb_2O_5$ content of starting solution. To investigate the existence of defect due to the increase of $Nb_2O_5$ content, dielectric and optical properties were measured. Due to the increase of defects in grown KLN single crystal, the shift of cutoff-frequency to lower energy and a broad Curie range, which shows the DPT (diffuse phase transition) characteristics, were observed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.5
• /
• pp.1-4
• /
• 1982

Single crystals of InSe were obtained by the Bridgman method. The crystal structure was hombohedral(R3m) with lattice paramete. a=4.02A, c=24.96A. At 300$^{\circ}$K the electrical conductivity was about ~10-2($\Omega$.cm)-1, reslpectively. The electrical conductivity type was n- type. The donor level located at 0.072eV below the conduction band. The Photosensitivity was observed in range from 840nm to 1120nm. The energy gap of InSe single crystal measured from the photoconductivity and the optical transmittance spectrum was 1.20eV, 1.21eV, respectively.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.43-51
• /
• 2004

In order to decommission the shielding concrete of KRR(Korea Research Reactor) -1＆2, it must be exactly determined activated level and range by neutron irradiation during operation. To determine the activated level and range, it must be sampled and analyzed the core sample. But, there are difficulties in sample preparation and determination of the measurement efficiency by self-absorption. In the study, the full energy efficiency of the HPGe detector was compared with the measured value using standard source and the calculated one using Monte Carlo simulation. Also. self-absorption effects due to the density and component change of the concrete were calculated using the Monte Carlo method. Its results will be used radioactivity analysis of the real concrete core sample in the future.

• Clean Technology
• /
• v.23 no.4
• /
• pp.388-392
• /
• 2017

In this study, a quantitative environmental impact assessment for the production process of breathable film was conducted employing Life Cycle Assessment (LCA) methodology. Among the various categories, Global Warming (GW) accounted for the highest impact (97%) followed by Human Toxicity (HT). And the key substances of various impact categories included HDPE, PP, and electricity. In the production process, the high impact resulted from mixing process (57%), lamination process (29%), and extruder process (10%). To improve environmental impact, it is necessary to design a new process system that reduces the amount of electricity used and that increases production yields, if raw materials such as HDPE and PP owe excluded.

• Annual Conference of KIPS
• /
• 2007.05a
• /
• pp.75-78
• /
• 2007

최근 센서네트워크에서 수집되는 방대한 양의 데이터를 효율적으로 처리하기 위하여 관계형 데이터베이스를 이용한 센서네트워크가 활발히 연구되고 있다. 센서네트워크에서는 제한된 에너지를 사용한다는 점, 스트림 데이터를 처리할 수 있어야 한다는 점 등에서 기존 데이터베이스와는 다른 연구가 필요하다. 정확히 일치하는 키 값에 대하여만 조인이 발생하는 조인연산 또한 센서네트워크에서 사용하기 위해서는 새로운 정의가 필요하다. 온도센서와 습도센서가 일정영역에 무작위로 뿌려져 있는 센서네트워크를 가정해 보자. 데이터베이스 관점에서는 온도릴레이션과 습도릴레이션이 존재하게 된다. 이때 위치에 따른 온도와 습도의 상관관계를 얻기 위하여 좌표를 키 값으로 하여 릴레이션을 조인하면 결과는 공집합이거나 아주 적은 수의 튜플만 얻게 되어 사용자가 원하는 결과를 얻을 수 없다. 그 이유는 동일한 좌표를 가지는 서로 다른 종류의 센서쌍이 존재할 확률이 매우 적기 때문이다. 본 논문에서는 이러한 문제를 해결하기 위하여 새로운 범위조인연산자를 제안한다. 이 범위조인연산자를 센서네트워크에 적용하면 좀 더 효율적인 데이터관리가 가능하고 데이터베이스에서 응용계층에 표준화된 인터페이스를 제공할 수 있다.

• Journal of the Korean Society for Railway
• /
• v.17 no.3
• /
• pp.178-185
• /
• 2014

This study investigates the characteristics of environmental impact from the construction phase of a high-speed railway through a Life Cycle Assessment method based on the materials used and the energy consumption of the equipment used according to the design statement. The results reveal that the contributions to environmental impact in the construction sector of a high-speed railway were 89% for civil engineering, 7% for the track system, 2% for stations and 2% for the energy and telecommunication system. In particular, the highest contribution to the impact in the civil engineering category were 54% for Global Warming, 25% for Abiotic Resource Depletion and 8% for Photochemical Oxidant Creation. The main influence factors were the use of remicon and cement. In future, the application of Life Cycle Assessment for the construction sector of railway construction will introduce efficient reduction methods according to the quantitative calculation of environmental impact.

• Korean Journal of Crystallography
• /
• v.1 no.1
• /
• pp.19-28
• /
• 1990

6H-SiC is a promising material (Eg=3.0eV) for blue light-emitting doide and high-temperature semiconducting device. In the experiment, single crystals of a-SiC have been grown by the sublimation method to fabricate blue light~emitting diode. During the growth of a-SiC single crystals, a temperature Vadient, yonh temperature and pressure ranges were kept 44℃/cm , 1800-1990℃ and 50-1000 mTorr, respectively. Single crystals obtained in Acheson furnace were used as seed crystals. Polarizing microscopy and back-reflection X-ray Laue diffraction showed that the a-SiC crystal was epitaxially and on the seed crytal. It was found by XRD analysis that when other growth conditions were the same, a-SiC was grown at the temperature above 1840℃ and 3C-SiC was gown at lower temperature or under low supersaturation of vapor. The carrier type. concentration and mobility were measured be hole(p-type), 7.6x1014cm-3 and 19cm2V-1sec-1, respectively, by van der Pauw method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.107-107
• /
• 2009

Micro pillar structure was investigated for the energy havesting applications. The micro pillar structures were investigated to find proper size of pillars. In this experiments, the aspect ratio between the height and diameter were changed to extract maximum peizoelectric coefficient. We proposed the idea and model for the energy harvesting systems based on the micro-pillar structure.