• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.183-185
• /
• 2019

최근 대용량 전력 전송 시스템에서 모듈형 다단 컨버터(Modular Multilevel Converter; MMC)를 이용한 고압 직류(high voltage DC; HVDC) 송전 시스템이 각광받고 있다. 일반적으로, 전압형 컨버터는 AC 단출력전압 합성 방법에 따라 AC 단 전압 사용률이 달라지며, MMC 시스템에 있어서도 마찬가지이다. 따라서, HVDC 송전시스템의 DC 단의 용량이 정해져 있는 경우에도 출력전압 합성 방법에 따라 AC 단으로 공급 가능한 최대 무효전력의 크기를 변화시킬 수 있다. 본 논문에서는 대표적인 전압 변조 방식에 따른 암 에너지 맥동을 수학적으로 분석하였으며, 이를 MMC의 실제 스케일의 시뮬레이션으로 검증하였다.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.309-314
• /
• 2021

The proposed preamplifier for the static random access memory reduces the time required for the sense amplifier enable during the read operation by 55%, which leads to a significant speed up the total spped. This is attirbuted to the novel circuit techqniue that cancels out the transistor mismatch which is induced by the process variation. In addition, a selective enable circuit for preamplifier circuit is proposed, so the proposed preamplifier is enabled only when it is required. Accordingly the energy overhead is limited below 4.45%.

• Annual Conference of KIPS
• /
• 2010.11a
• /
• pp.1065-1067
• /
• 2010

실제 무선센서네트워크 환경에서 무선링크는 일반적으로 발생하는 간섭, 감쇠, 멀티패스 등으로 인해 비신뢰성과 비대칭성을 가진다. 기존에 제안된 위치기반라우팅기법들은 이러한 무선링크의 특성을 고려하지 않아, 데이터 전송 성공률과 에너지 효율이 떨어지는 문제를 가진다. 본 논문에서는 무선링크의 비신뢰성과 비대칭성 그리고 거리 값을 고려한 기대전송비용(EC)을 정의하고, 데이터와 ACK 패킷 각각에 대해 예상전송비용이 최소인 경로를 찾아 에너지 효율적인 전송을 한다. 이러한 방법을 통해 센서노드의 제한된 베터리 자원을 효율적으로 사용하고, 네트워크 라이프타임을 증가시킨다.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.3
• /
• pp.61-68
• /
• 2001

This study represents numerical analysis on the thermal and fluid flow of the air layer in a solar collector. The boundary conditions was assumed that the top and bottom wall of the air layer have a heating and cooling surface, respectively, and this calculation model have a solid body with a cooling temperature of $20^{\circ}C$. As the results of simulations, the magnitudes of the velocity vectors and isotherms are increased proportionally to the tilt angles. As the tilt angle is increased, the mean Nusselt numbers are increased and the maximum value of the mean Nusselt number was appeared at tilt angle $\theta=75^{\circ}$.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.336-337
• /
• 2020

Static synchronous compensator(STATCOM)은 무효전력을 공급하여 외란을 완화하는 등 전력 품질을 향상시켜 전력 계통을 안정화하는 시스템이다. Cascaded H-bridge(CHB) 컨버터는 멀티레벨 구조를 가지므로 STATCOM 시스템 적용에 많은 이점이 있다. 하지만, 이러한 멀티레벨 CHB 컨버터의 안정적인 동작을 위해서는 균형 제어가 필수적이다. 본 논문에서는 Y 결선 CHB 컨버터의 레그 에너지 균형 제어에 사용되는 주입 영상분 전압에 대하여 분석하고 균형 제어의 동특성 향상을 위한 전향 보상 계산 방법을 제안하였다. 제안한 방법을 적용하여 부하 불평형뿐만 아니라 계통 사고로 인한 계통 및 부하 동시 불균형에서도 안정적으로 시스템을 동작할 수 있다. 마지막으로 제안한 방법에 대한 수학적 타당성을 제시하고, 50MVA의 실제 스케일의 시뮬레이션을 통해 제안하는 방법을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.130-132
• /
• 2020

배터리 시스템은 어플리케이션의 대영화에 따른 데이터 저장공간 문제 및 연속적인 배터리 신뢰성 문제 해결을 위한 건전성 예측 및 관리기술 접목에 관한 문제에 직면해 있으며, 이러한 문제 해결을 위해서는 배터리 시스템 신호를 통해 추출 가능한 건전성 지표 수립이 중요하다. 본 논문은 건전성 지표를 물리적, 간접적 지표로써 정의하고, 사이클 노화 데이터를 통해 건전성 지표로써의 성능을 검증하였다.

• Journal of Sensor Science and Technology
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2003

CsI single crystals doped with lithium, potassium or rubidium were grown by using Czochralski method at Ar gas atmosphere. The energy resolutions of CsI(Li:0.2 mole%), CsI(K:0.5 mole%) and CsI(Rb:1.5 mole%) scintillators were 14.5%, 15.9% and 17.0% for $^{137}Cs$(0.662 MeV), respectively. The energy calibration curves of CsI(Li), CsI(K) and CsI(Rb) scintillators were linear for $\gamma$-ray energy. The time resolutions of CsI(Li:0.2 mole%), CsI(K:0.5 mole%) and CsI(Rb:1.5 mole%) scintillators measured by CFT(constant-fraction timing method) were 9.0 ns, 14.7 ns and 9.7 ns, respectively. The fluorescence decay times of CsI(Li:0.2 mole%) scintillator had a fast component and slow one of ${\tau}_1=41.2\;ns$ and ${\tau}_2=483\;ns$, respectively. The fluorescence decay times of CsI(K:0.5 mole%) scintillator were ${\tau}_1=47.2\;ns$ and ${\tau}_2=417\;ns$. And the fluorescence decay times of CsI(Rb:1.5 mole%) scintillator were ${\tau}_1=41.3\;ns$ and ${\tau}_2=553\;ns$. The phosphorescence decay times of CsI(Li:0.2 mole%), CsI(K:0.5 mole%) and CsI(Rb:1.5 mole%) scintillators were 0.51 s, 0.57 s and 0.56 s, respectively.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.74-83
• /
• 2018

This study conducted the Life Cycle Assessment(LCA) on waste rubber recycling technology for recovering rubber product from the waste tires. Environmental impacts were assessed for the five categories of impacts: global warming, resource depletion, acidification, eutrophication, photochemical oxide production, and ozone layer depletion. When recycling 1ton of waste tire containing rubber, global warming impact was 1.77E+02 kg $CO_2-eq.$, resource depletion impact was 1.23E+00 kg Sb-eq., acidification impact was 5.92E-01 kg $SO_2-eq.$, eutrophication impact was 1.23E-01 kg $PO{_4}^{3-}-eq.$, photochemical oxide production impact was 3.42E-01 kg $C_2H_4-eq.$, and ozone layer depletion impact was 1.87E-04 kg CFC11-eq. In terms of overall environmental impacts, carbon, softener and electricity the greatest impact, so it is necessary to compare the environmental impacts of the raw materials to replace carbon and softener, and a method to reduce the filler usage in the process is needed. In addition, it is necessary to improve energy efficiency, change to low-energy sources, and apply renewable energy.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.739-744
• /
• 2013

In this study, torrefaction was performed to improve fuel properties of Larch. The optimal condition for torrefaction was investigated by response surface methodology. The torrefaction temperature and time ranged $220{\sim}280^{\circ}C$ and 20~80 min, respectively. As the torrefaction temperature and time increased, the carbon content of torrefied biomass increased from 49.36 to 56.65%, while its hydrogen and oxygen contents decreased from 5.56 to 5.48% and from 37.62 to 31.67%, respectively. The weight loss and calorific value increased with SF, while energy yield decreased. At the severe torrefaction condition (SF 7), the weight loss and calorific value were 26.58% and 22.30 MJ/kg, respectively. The energy contained in torrefied biomass increased to 20.41%, when compared with the untreated biomass. As the torrefaction severity increased, the energy yield decreased due to the relatively high weight loss of biomass. Therefore, the highest energy yield was obtained at high calorific value and low weight loss of biomass (SF 5.72).

• Korean Journal of Materials Research
• /
• v.3 no.2
• /
• pp.121-130
• /
• 1993

The GaP crystals were grown by synthesis solute diffusion method and its properties were investigated. High quality single crystals were obtained by pull-down the crystal growing ampoule with velocity of 1.75mm/day. Etch pits density along vertical direction of ingot was increased from 3.8 ${\times}{10^4}$c$m^{-2}$ of the first freeze to 2.3 ${\times}{10^5}$c$m^2$ of the last freeze part. The carrier concentration and mobilities at room temperature were measured to 197.49cc$m^2$/V.sec and 6.75 ${\times}{10^{15}}$c$m^{-3]$, respectively. The temperature dependence of optical energy gap was empirically fitted to $E_g$(T)=[2.3383-(6.082${\times}{10^{-4}}$)$T^2$/(373. 096+TJeV. Photoluminescence spectra measured at low temperature were consist with sharp line-spectra near band-gap energy due to bound-exciton and phonon participation in band edge recombination process. Zn-diffusion depth in GaP was increased with square root of diffusion time and temperature dependence of diffusion coefficient was D(Tl = 3.2 ${\times}{10^3}$exp( - 3.486/$k_{\theta}$T)c$m^2$/sec. Electroluminescence spectra of p-n GaP homojunction diode are consisted with emission at 630nm due to recombination of donor in Zn-O complex center with shallow acceptors and near band edge emission at 550nm. Photon emission at current injection level of lower than 100m A was due to the band-filling mechanism.