• Title/Summary/Keyword: 에너지 장벽

Search Result 148, Processing Time 0.026 seconds

Current Status of Countermeasure for Overcoming the International Environmental Regulations in Korea (국제환경규제에 대한 국내의 대응 현황)

  • Jung, Bong-Jin;Lee, Kwi-Ho
    • Clean Technology
    • /
    • v.16 no.3
    • /
    • pp.155-161
    • /
    • 2010
  • Product-based environmental regulations, such as RoHS, REACH, EuP, etc., on electrical and electronic equipments, chemicals, and so on, initiated by the European Union, are becoming a global trend. These regulations can create barriers to trade among nations worldwide and may thereby have a direct impact on the function of internal market. If domestic companies utilize well the international environmental regulations in advance, they will get good opportunity for expanding overseas market. In this paper the current status of countermeasure for overcoming the international environmental regulations in domestic industries was investigated and the future plans were discussed.

The characteristic analysis of TCO/p-layer interface in Amorphous Silicon Solar cell (비정질 실리콘 태양전지에서 투명전도막/p층 계면 특성분석)

  • Lee, Ji-Eun;Lee, Jeong-Chul;O, Byung-Sung;Song, Jin-Soo;Yoon, Kyung-Hoon
    • New & Renewable Energy
    • /
    • v.3 no.4
    • /
    • pp.63-68
    • /
    • 2007
  • 유리를 기판으로 하는 superstrate pin 비정질 실리콘 태양전진에서 전면 투명전도막(TCO)과 p-층의 계면은 태양전지 변환효율에 큰 영향을 미친다. 면투명전도막(TCO)으로 현재 일반적으로 사용되는 ZnO:Al는 $SnO_2:F$보다 전기, 광학적으로 우수하고, 안개율 (Haze)높으며, 수소 플라즈마에서 안정성이 높은 특징을 갖고 있다. 그래서 박막 태양전지의 특성향상에 매우 유리하나, 태양전지로 제조했을 때, $SnO_2$보다 충진율(Fill Factor:F.F)과 $V_{oc}$가 감소한다는 단점을 가지고 있다. 본 실험실에서는 $SnO_2:F$dml F.F.가 72%이 나온 반면 ZnO:Al의 F.F은 68%에 그쳤다. 이들 원인을 분석하기 위해 TCO/p-layer의 전기적 특성을 알아 본 결과, $SnO_2:F$보다 ZnO:Al의 직렬저항이 높게 측정되었다. 이러한 결과를 바탕으로 p-layer에 $R=(H_2/SiH_4)=25$로 변화, p ${\mu}c$-Si:H/p a-SiC:H로 p-layer 이중 증착, p-layer의 boron doping 농도를 증가시키는 실험을 하였다. 직렬저항이 가장 낮았던 p ${\mu}c$-Si:H/p a-SiC:H 인 p-layer 이중 증착에서 $V_{oc}$는 0.95V F.F는 70%이상이 나왔다. 이들 각 p층의 $E_a$(Activiation Energy)를 구해본 결과, ${\mu}c$-Si:H의 Ea 가 가장 낮은 것을 관찰 할 수 있었다.

  • PDF

Innovation and Future Skills Needs-Green Car (기술혁신과 미래숙련수요 대응-그린카 발전을 중심으로)

  • Hwang, Gyu-Hee;Lee, Joong-Man
    • Journal of Korea Technology Innovation Society
    • /
    • v.13 no.3
    • /
    • pp.399-422
    • /
    • 2010
  • Global expansion of regulation for carbon emission has brought new industrial regulations and trade barriers while the global economy is promoting economic stimulus through a variety of green investments such as renewable energy development, energy efficiency increase, and environmental improvement simultaneously. Korean government is trying to seek a new opportunity to grow through green investment in this change of business environment and businesses are facing the transition to low-carbon and eco-friendly structure for their survival. It is promoting not only industry structure changes and conversion but also demanding changes of workforce composition and requirement skills. In response to convergence of green economy, manpower development for future skills needs is provided the main impetus for response as well as promotion green growth. This study will analyze human resource development plan due to future skills needs emphasizing on automative industry. Also the study will be researched on the problems of present curriculum of undergraduate and look for improvements tasks. Upon the result, promotion plans for human resource development in other sectors of green car in response to future skills needs in green growth can be found.

  • PDF

Analysis of Grain Boundary Phenomena in ZnO Varistor Using Dielectric Functions (유전함수를 이용한 ZnO 바리스터의 입계 특성 분석)

  • Hong, Youn-Woo;Shin, Hyo-Soon;Yeo, Dong-Hun;Kim, Jong-Hee
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2008.11a
    • /
    • pp.178-178
    • /
    • 2008
  • ZnO 바리스터는 인가되는 전압에 따라 저항이 변하는 전압 의존형 저항체이며 각종 전기 전자 정보통신용 제품에 정전기(ESD) 대책용 소자로 폭 넓게 사용되는 전자 세라믹스 부품이다. 특별히 Bi-based ZnO 바리스터는 다양한 상(phase)으로 구성되어 있으며 그 입계의 전기적 특성은 소량 첨가되는 dopant의 종류에 따라 다양하게 변하는 것으로 알려져 있다. 본 연구에서는 Bi-based ZnO 바리스터 (ZnO-$Bi_2O_3$, ZnO-$Bi_2O_3-Mn_3O_4$)에서 각종 유전함수$(Z^*,M^*,\varepsilon^*,Y^*,tan{\delta})$를 이용하여 입계의 주파수-온도에 대한 특성을 살펴 보았다. 일반적인 ZnO 바리스터 제조법으로 시편을 제작하여 78K~800K 온도 범위에서 각종 유전함수를 이용하여 복소 평면도(complex plane plot)와 주파수 응답도(frequency explicit plot)의 방법으로 defect level과 입계 특성(활성화 에너지, 정전용량, 저항, 입계 안정성 등)에 대하여 고찰하였다. ZnO-$Bi_2O_3$(ZB)계와 ZnO-$Bi_2O_3-Mn_3O_4$(ZBM)계 모두 상온 이하의 온도에서 $Zn_i$$V_o$의 결함이 나타났으며, 이들의 결함 준위는 각 유전함수에 따라 다소 차이가 났다. 입계 특성으로 ZB계는 이상구간(560~660K)을 전후로 1.15 eV $\rightarrow$ 1.49 eV의 활성화 에너지의 변화가 나타났지만, ZBM계는 이러한 현상이 나타나지 않았다. 또한 입계 전위 장벽의 온도 안정성에 대해서는 Cole-Cole model을 적용하여 분포 파라미터 (distribution parameter; $\alpha$)를 구하여 고찰하였다. ZB계의 입계 안정성은 온도에 따라 불안정해 졌지만, ZBM계는 안정하였다.

  • PDF

A Study of Kirkendall Void Formation and Impact Reliability at the Electroplated Cu/Sn-3.5Ag Solder Joint (전해도금 Cu와 Sn-3.5Ag 솔더 접합부의 Kirkendall void 형성과 충격 신뢰성에 관한 연구)

  • Kim, Jong-Yeon;Yu, Jin
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.15 no.1
    • /
    • pp.33-37
    • /
    • 2008
  • A noticeable amount of Kirkendall voids formed at the Sn-3.5Ag solder joint with electroplated Cu, and that became even more significant when an additive was added to Cu electroplating bath. With SPS, a large amount of voids formed at the $Cu/Cu_3Sn$ interface of the solder joint during thermal aging at $150^{\circ}C$. The in-situ AES analysis of fractured joints revealed S segregation on the void surface. Only Cu, Sn, and S peaks were detected at the fractured $Cu/Cu_3Sn$ interfaces, and the S peak decreased rapidly with AES depth profiling. The segregation of S at the $Cu/Cu_3Sn$ interface lowered interface energy and thereby reduced the free energy barrier for the Kirkendall void nucleation. The drop impact test revealed that the electrodeposited Cu film with SPS degraded drastically with aging time. Fracture occurred at the $Cu/Cu_3Sn$ interface where a lot of voids existed. Therefore, voids occupied at the $Cu/Cu_3Sn$ interface are shown to seriously degrade drop reliability of solder joints.

  • PDF

Magnetoresistance and Structural Properties of the Magnetic Tunnel Junction with Ternary Oxide Barrier (삼원계 산화 절연층을 가진 자기터널접합의 자기·구조적 특성에 관한 연구)

  • Park, Sung-Min;Lee, Seong-Rae
    • Journal of the Korean Magnetics Society
    • /
    • v.15 no.4
    • /
    • pp.231-235
    • /
    • 2005
  • We studied the microstructural evolution of ZrTM-Al (TM=Nb and Ti) alloy films, MR and electrical properties of the MTJ with $ZrTM-AlO_x$ barrier as a function of Zr/TM ratio. We observed that the ternary-oxide barrier reduced the TMR ratio due mainly to the structural defects such as the surface roughness. The change in TMR ratio and $V_h$ with Zr/TM ratio exactly corresponds to the systematic changes in the microstructural variation. Although the MTJ with ternary oxide reduced the TMR and the electrical stabilities, the junction resistances decreased as the Ti and Nb concentration increased due to the band-gap reduction caused by the formation of extra bands

A optimum studies of TCO/p-layer for high Efficiency in Amorphous Silicon Solar cell (비정질 실리콘 태양전지 고효율화를 위한 전면투명전도막/p 최적연구)

  • Lee, Ji-Eun;Lee, Jeong-Chul;Oh, Byung-Seng;Song, Jin-Soo;Yoon, Kyung-Hoon
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2007.11a
    • /
    • pp.275-277
    • /
    • 2007
  • 유리를 기판으로 하는 superstrate pin 비정질 태양전지에서 전면투명전도막(TCO)과 p-layer의 계면이 태양전지의 효율을 내는데 가장 큰 기여를 한다. 전면투명전도막(TCO)으로 현재 일반적으로 사용되는 ZnO:Al는 $SnO_2:F$ 보다 전기,광학적으로 우수하고, 안개율(Haze)높으며, 수소 플라즈마에서의 안정성이 높은 특정을 갖고 있다. 그래서 박막 태양전지 특성향상에 매우 유리하나, 태양전지로 제조했을 때, $SnO_2:F$보다 충진율(Fill factor:F.F)과 V_{\infty}$ 가 감소한다는 단점을 가지고 있다. 본 실험실에서는 $SnO_2:F$의 F.F가 72%이 나온 반면 ZnO:Al의 F.F은 68%에 그쳤다. 이들 원인을 분석하기 위해 TCO/p-layer의 전기적 특성을 알아 본 결과, $SnO_2:F$보다 ZnO:Al의 직렬저항이 높게 측정되었다. 이러한 결과를 바탕으로 p-layer 에 R={$H_2/SiH_4$}=25로 변화, p ${\mu$}c$-Si:H/p a-SiC:H 로 p-layer 이중 증착, p-layer의 boron doping 농도를 증가시키는 실험을 하였다. 직렬저항이 가장 낮았던 p ${\mu$}c$-Si:H/p a-SiC:H 로 p-layer 이중 증착에서 Voc는 0.95V F.F는 70% 이상이 나왔다. 이들 각 p층의 $E_a$(Activation Energy)를 구해본 결과, ${\mu$}c$-Si:H의 Ea 가 가장 낮은 것을 관찰 할 수 있었다.

  • PDF

SiC/SiO2 Interface Characteristics in N-based 4H-SiC MOS Capacitor Fabricated with PECVD and NO Annealing Processes (PECVD와 NO 어닐링 공정을 이용하여 제작한 N-based 4H-SiC MOS Capacitor의 SiC/SiO2 계면 특성)

  • Song, Gwan-Hoon;Kim, Kwang-Soo
    • Journal of IKEEE
    • /
    • v.18 no.4
    • /
    • pp.447-455
    • /
    • 2014
  • In this research, n-based 4H-MOS Capacitor was fabricated with PECVD (plasma enhanced chemical vapor deposition) process for improving SiC/$SiO_2$ interface properties known as main problem of 4H-SiC MOSFET. To overcome the problems of dry oxidation process such as lower growth rate, high interface trap density and low critical electric field of $SiO_2$, PECVD and NO annealing processes are used to MOS Capacitor fabrication. After fabrication, MOS Capacitor's interface properties were measured and evaluated by hi-lo C-V measure, I-V measure and SIMS. As a result of comparing the interface properties with the dry oxidation case, improved interface and oxide properties such as 20% reduced flatband voltage shift, 25% reduced effective oxide charge density, increased oxide breakdown field of 8MV/cm and best effective barrier height of 1.57eV, 69.05% reduced interface trap density in the range of 0.375~0.495eV under the conduction band are observed.

Economic Impact of City-Gas Industry by the Expansion of Natural Gas Use in Power Generation (발전부문 천연가스 사용 확대에 따른 도시가스 산업의 경제적 파급효과 분석)

  • Yang, Minyoung;Kim, Jinsoo
    • Environmental and Resource Economics Review
    • /
    • v.26 no.4
    • /
    • pp.549-575
    • /
    • 2017
  • Recently, power mix of Korea is planned to be changed from coal-fired and nuclear to gas-combined and renewables by the energy policy of new government. This change will also affect city-gas industry. This paper analyze the economic impact of city-gas industry by scenario that switching coal-fired and nuclear power generation into gas-combined and fuel cell. 2030 input-output table is estimated to take the transfer period into account. As results, the induced impact by city-gas industry to the others was negative when switching into gas-combined while that was positive when switching into fuel cell. This results imply that the gas-fired can be a feasible alternative for short-run but fuel cell is more helpful for our economy in long-run.

The Ion Transport Phenomena through the Liquid Membrane with Macrocyclic Compound (I). Mechanism of Potassium Ion Transport through $H_2O-CHl_3-H_2O$ System with Dibenzo-18-Crown-6 (마크로고리 화합물을 운반체로 하는 액체막을 통한 이온의 운반에 관한 연구 (제1보). Dibenzo-18-Crown-6-(DBC)/$H_2O-CHCl_3-H_2O$계에서 칼륨이온의 운반 메카니즘)

  • Yoon, Chang-Ju;Lee, Shim-Sung;Koo, Chang-Hyun;Kim, Si-Joong
    • Journal of the Korean Chemical Society
    • /
    • v.28 no.3
    • /
    • pp.163-169
    • /
    • 1984
  • The transport rates of $K^+$ion through CHCl$_3$ liquid membrane containing dibenzo-18-crown-6(DBC) as a carrier molecule have been determined at $25^{\circ}C$. The transport rates depend highly on the ion concentration and on the nature of anion. It is concluded that $K^+$ions are transported in the form of ion-pair. In the case of potassium picrate, however, it is found that the transport proceeds with the formation of the incomplete ion-pair in the concentration less than 1.0 ${\times}10^{-3}$M of picrate, while with the complete formation of ion-pair in the concentration more than 1.0 ${\times}10^{-3}$M of picrate. Seven steps of the transport process are suggested and they can be illustrated in terms of energy barrier model as a function of the position of ionic species in the membrane.

  • PDF