• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.228-228
• /
• 2016

증발산량은 수자원 부존량 평가, 물수지 분석, 지구의 물순환 및 에너지 순환을 이해하기 위해서 알아야할 수문량이나, 이를 산정하기 위하여 단순한 가정을 하거나 경험식을 사용하는 접근에는 신뢰성에 문제가 생긴다. 본 연구에서는 아시아 지역내의 여러 지점에서 에디공분산 시스템을 활용해 플럭스 자료를 구축해놓은 Asia Fluxnet의 자료를 활용해 보완관계법(Complimentary relationship) 기반으로 제한된 기상자료를 이용해 구한 증발산량을 산정하는 방법론들을 평가하였다. Granger and Gary(GG)는 실제 증발산량은 습윤조건의 증발산량의 2배에 잠재 증발산량간의 차와 같다는 보완관계를 수정하여 일반화하고, 잠재 증발산량을 산정하는 경험식을 제시하였다. 이러한 수정된 보완관계식을 활용한 GG 방법론을 활용하여 산정한 증발산량을 측정된 증발산량과 비교한 정확성을 정량화 하기 위해 Average root mean square error (RMSE), mean absolute bias (BIAS), coefficient of determination ($R^2$)과 같은 통계값을 이용하였다. 최종적으로 각 사이트의 기후를 Aridity Index (AI)를 이용하여 분류하였으며 분류된 기후별로 GG 방법론의 적용성을 검토하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.111-111
• /
• 2019

장기유출해석에서 유출률은 강수량에 대한 유출량의 비로 정의되며 이를 이해하는 것은 물순환 평가와 수자원 관리에 매우 중요하다. 이 연구에서는 물수지 방정식으로부터 유출률(C)을 강수량(P)과 증발산량(E)의 함수로 나타내보고 이를 검증하기 위해 우리나라와 일본 큐슈의 총 14개 유역에 적용해 보았다. 모든 유역에서 강수량과 유출량이 증발산에 비해 크게 변동하였으며 강수량과 유출량은 높은 상관관계를 나타냈다. 유출률은 강수량과 비례하지만, 강수량이 커질수록 강수량의 변화에 대한 유출률의 변화가 작게 나타났다. 큐슈보다 연강수량이 적은 우리나라의 경우 강수량의 변화에 따른 유출률의 변화가 크기 때문에 수자원 관리에 어려움이 예상된다. 한편, 증발산량은 흔히 이해되는 바와 같이 연평균기온이 높은 유역에서 대체로 크게 나타났으며 우리나라보다 큐슈에서 증발산량이 기온의 변화에 더 민감하게 변화한다.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.580-587
• /
• 2017

Woodfiber insulation board can be considered as a one of the key material for low energy consumption, comfortable and safety construction of residential space because of its eco-friendly and high thermal insulation performance. This study was carried out to investigate the formaldehyde (HCHO) total volatile organic compounds (TVOC) emission properties and combustion shapes by flame test of low density fiberboards (LDFs) prepared with different adhesives. HCHO TVOC emission and combustion properties of LDFs prepared by melamine urea formaldehyde (MUF), phenol formaldehyde (PF), emulsified methylene diphenyl diisocyanate (eMDI) and latex resin adhesives were measured by desiccator method, 20 L chamber method, and flame test, respectively. As results, LDFs manufactured by MUF, eMDI and latex resin adhesives satisfied the Super $E_0$ grade of HCHO emission performance except PF resin. Furthermore, TVOC emission of all LDFs were satisfied the Korean indoor air quality standard (below $400{\mu}g/m^2{\cdot}h$). Especially, LDF with eMDI resin adhesive showed the lowest HCHO and TVOC emissivity, that $0.14mg/{\ell}$, $12{\mu}g/m^2{\cdot}h$, respectively. However, eMDI emitted the small amount ($3{\mu}g/m^2{\cdot}h$) of toluene in VOC components. In the flame test, LDF with MUF resin adhesives showed the most favorable shape after flame test compare to LDFs prepared other adhesives. Based on HCHO and TVOC emission, and combustion shapes, MUF resin adhesive may be recommended to prepare LDF for insulation purpose.

• Journal of Wetlands Research
• /
• v.18 no.2
• /
• pp.166-172
• /
• 2016

Accurate understanding of land surface is essential to analyze energy exchanges between earth surface and atmosphere. For the quantization of energy fluxes, the various researches about Land Surface Model(LSM) have been progressed. Among the various LSMs, the researches using Common Land Model(CLM) and Variable Infiltration Capacity(VIC) model are performed briskly. The CLM which is advanced LSM can calculate realistic results with few user defined parameters. The VIC model which is also typical LSM is widely used for estimation of energy fluxes and runoff in various fields. In this study, the energy fluxes which are net radiation, sensible heat flux, and latent heat flux were estimated using CLM and VIC model at Southern Sierra-Critical Zone Observatory(SS-CZO) site in California, United States. In case of net radiation and sensible heat flux, both models showed good agreement with observations, however, the CLM showed underestimated patterns of net radiation and sensible heat flux during precipitation period. In case of latent heat flux, the CLM represented better estimation of latent heat flux than VIC model which underestimated the latent heat flux. Through the estimation of energy fluxes and analysis of models' pros and cons, the applicability of CLM and VIC models and need of multi-model application were identified.

• Clean Technology
• /
• v.20 no.4
• /
• pp.449-456
• /
• 2014

There has been increasing concerns for the problems of water security in countries, caused by the frequent occurrence of localized drought due to the climate change and uncertainty of water balance. The importance of fresh water is emphasized as considerable amount of usable fresh water is utilized for power generation sector producing electricity. PV power system, the source of renewable energy, consumes water for the every steps of life cycle: manufacturing, installation, and operation. However, it uses relatively less water than the traditional energy sources such as thermal power and nuclear power sources. In this study, to find out the use of water for the entire process of PV power system from extracting raw materials to operating the system, the footprint of water in the whole process is measured to be analyzed. Measuring the result, the PV water footprint of value chain was $0.989m^3/MWh$ and the water footprint appeared higher specially in poly-Si and solar cell process. The following two reasons explain it: poly-Si process is energy-intensive process and it consumes lots of cooling water. In solar cell process, deionized water is used considerably for washing a high-efficiency crystalline silicon. It is identified that PV system is the source using less water than traditional ones, which has a critical value in saving water. In discussing the future energy policy, it is vital to introduce the concept of water footprint as a supplementary value of renewable energy.

• Korean Journal of Materials Research
• /
• v.2 no.5
• /
• pp.366-374
• /
• 1992

Mechanical and impact properties of stitched S2 glass fiber reinforced polyester woven laminates composites have been studied. Laminates were stitched using Kevlar 49 thread with 1/2, 1, and 2 inch stitch spacing. Tensile and 3-point bending tests haute been performed to evaluate the mechanical properties of stitched and unstitched laminates. Impact tests at applied energy of 234.7J were performed to examine the impact behavior and toughness changes of the specimen. The same specimens were also tested repeatedly at low impact energy level of 110.2J for 3 times to evaluate damage tolerance properties. The tensile and 3-point bending test results showed that one inch spacing specimen had the highest tensile and flexural strength. It also showed the highest energy absorption capability and the best damage tolerance property at the repeated impact test. The half inch spacing specimen showed the lowest tensile strength and energy absorption property at the impact energy level of 234.7J, even though it had the highest frequency of stitching thread.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.1
• /
• pp.121-126
• /
• 1998

This study is to examine the energy budget of Hexagrammos agrammus in the natural habitat, based on the von Bertalanffy's growth model using food consumption and growth data of the fish. The fish were collected at the coasts of Tongbaek Island in Pusan and Shinsu Island in Samchonpo, Korea. The standard energy budget model was adopted for this study and the model has the components of toed consumption (C), production (G), assimilation (A), absorption ($A_b$), catabolism (R), excreta (U) and feces (F). These components were expressed as mass unit, not as calorie unit as usual. Both the mass and the proportion of each component varied with age of the fish, The mass of annual excreta declined as the fish became older, while those of the other components increased with the age. The relationship between mean weight (W) and annual absorption ($A_b$) was a non-linear one with the equation of $A_b=4.592W^{0.666}$, while that between mean weight (W) and annual catabolism (R) was linear as R=0.007+0.567W. On the other hand, the annual food consumption (C) showed linear relations both with annual assimilation (A) and annual catabolism (R) as A= -7.026+0.061C and R=-20.749+0.048C, respectively.

• The Korean Journal of Ecology
• /
• v.27 no.4
• /
• pp.245-256
• /
• 2004

The simple biosphere model 2 (SiB2), which is one of the land surface models, simulates the exchange of momentum, energy and mass such as water vapor and carbon dioxide between atmosphere and biosphere, and includes the biochemical sub-model for representation of stomatal conductance and photosynthetical activities. Throughout the SiB2 simulation, the significant information not only to understand of water and carbon budget but also to make an analysis of interaction such as feed-back and-forward between environment and vegetation is given. Using revised SiB2-Paddy, one sample study which is the evaluation of the runoff in Chaophraya river basin according to land use/cover change is presented in this review. Hence, SiB2 is available in order to ecological studied, if revised SiB2 for realistic simulation about soil respiration, computing leaf area index, vegetation competition and soil moisture is improved.

• KDI Journal of Economic Policy
• /
• v.19 no.3
• /
• pp.195-246
• /
• 1997

우리나라에서 전기요금은 공공요금으로서 정부의 정책의지에 의하여 크게 영향을 받아왔다. 또한 전기요금수준 조정시 규제당국의 주된 관심은 요금인상이 국민경제에 미치는 영향, 특히 물가 및 무역수지에 미치는 영향에 있었다고 할 수 있다. 이러한 상황에서 전기요금변동의 국민경제적 영향에 대한 신뢰할 수 있는 분석결과는 올바른 정책수립에 필수적이라고 할 수 있다. 본고는 계산가능한 일반균형모형(Computable General Equilibrium model)을 이용하여 1993년도의 산업연관표를 토대로 전기요금의 인상이 물가, 수출입 등 거시변수에 미치는 효과 및 산업부문별 효과를 살펴본 것이다. 전기요금인상이 물가에 미치는 영향은 간단히 '전기요금인상률${\times}$물가가중치'라는 공식으로 계산해볼 수 있다. 이에 따르면 전기의 소비자물가 가중치가 14/1,000이므로 전기요금인상률이 4%일 때 소비자물가상승률은 약 0.056%가 된다. 그러나 전기가 타산업의 중간투입물로 사용되므로 전기요금인상은 타산업 산출물의 가격상승을 유발하고 다시 투입-산출관계에 의하여 추가적인 물가상승을 불러일으키게 된다. 이러한 일반균형적 효과를 모두 고려하여, 본 연구에서 계산한 소비자물가상승률은 0.083%로서 위 수치의 약 1.5배이다. 또한 본고에서는 전기요금인상에 따라 수출과 수입 모두 감소하되, 수출감소율이 수입감소율보다 크게 나타났다. 이러한 결과는 전기요금인상에 따라 전기수요가 감소하여 에너지수입이 감소하고, 그로 인해 무역수지가 개선되리라는 일부의 주장과는 매우 대조적이다. 산업별로는 전기요금인상에 따라 서비스업의 가격상승이 두드러지는 것으로 나타났는데, 이는 서비스업부문의 국내재와 수입재간의 대체가능성이 타부문에 비하여 크게 낮은 데 기인한 것으로 보인다. 본고의 결과를 전기요금이 인상되어서는 안 된다고 해석하는 것은 오류일 수 있다. 전기요금인상의 타당성은 전력산업에 대한 종합적인 미시적 분석에 기초하여야 한다.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.93-97
• /
• 1999

In order to lower the surface energy of unsaturated polyester(UPE) resin, small amount of siloxane-ester copolymers were incorporated. The copolymers were synthesized by a condensation polymerization using ethylene glycol and hydroxy termintated polydimethylsiloxane as diols and maleic anhydride and phthalic anhydride as dibasic acids. The modified UPE resin surface was characterized by dynamic contact angle (DCA), peel strength measurements of pressure sensitive adhesives and X-ray photoelectron spectroscopy(ESCA). As the copolymer content in the blend and PDMS content in the copolymer are increased, both advancing and receding contact angles against water are increased. The strength required to peel-off the pressure sensitive adhesive tape from the modified UPE resin decreased dramatically with the addition of the copolymer. ESCA results indicated that polydimethylsiloxane segments are predominated at the outer surface of the modified UPE resin.