• New & Renewable Energy
• /
• v.1 no.2 s.2
• /
• pp.53-59
• /
• 2005

Objective of the research is to demonstrate solar thermal space and ground heating system which is integrated to a green-house culture facility for reducing healing cost, Increasing the value of product by environment control, and developing advanced culture technology by deploying solar thermal system. Field test for the demonstration was carried out in horticulture complex In Jeju Island. Medium scale solar hot water system was installed in a ground heating culture facility. Reliability and economic aspect of the system which was operated complementary with thermal storage and solar hot water generation were analyzed by investigating collector efficiency, operation performance, and control features. Short term day test on element performance and Long term test of the whole system were carried out. Optimum operating condition and its characteristics were closely Investigated by changing the control condition based on the temperature difference which Is the most important operating parameter For establishing more reliable and optimal design data regarding system scale and operation condition, continuous operation and monitoring on the system need to be further carried out. However, It is expected that, in high-insolation areas where large-scale ground storage is adaptable, solar system demonstrated in the research could be economically competitive and promisingly disseminate over various application areas.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.1 no.1
• /
• pp.47-55
• /
• 1998

In this paper, authors try to assess the marine traffic environment from the viewpoint of the degree of congestion. First, the marine traffic flow simulation is carried out to get the information related to the assessment. The simulation is performed based on the wide investigation of marine traffic environment and some statistical methods. Then the degree of congestion is reasoned by using the reasoning methods of the degree of collision risk made to develop collision avoidance system. The quantified degree of congestion reasoned by this method provides much information needed to the design and the evaluation of marine traffic environment.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.7
• /
• pp.15-22
• /
• 2000

This paper proposes a distributed highlight algorithm to generate efficiently echo signal for underwater target. In this algorithm, echo signal is synthesized by discontinuity highlights that are varied to incident angle, by equivalent and specified position highlights according to the spatial target structure. Completed UTAHID(Underwater TArget by Highlight Distribution) model is confrimed that PTS, ETS, echo elongation effect, target time spreading loss and envelope fluctuation are satisfied to expected values by various simulations. Thus it can be efficiently used in all sorts of real systems related to underwater target echo signal synthesis in active sonar.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.3
• /
• pp.116-121
• /
• 2005

In the present paper, a new calculation algorithm far solving large scale environmental or geophysical flows with free surface is proposed where the non-hydrostatic pressure component is taken into consideration. Predictor-corrector fractional step approach with explicit, forward time marching scheme in the sigma coordinate system is employed. In order to validate the present calculation algorithm and to estimate the effects of non-hydrostatic pressure on resultant flow and free surface movements, example calculations are carried out for typical steady and unsteady flow problems. Present method can be applied to the meso-scale free surface flows with complex bottom topography where MAC-like 3-d hydrodynamic calculations are quite ineffective and uneconomic.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.177-185
• /
• 2008

Research on media access control (MAC) scheme for Wireless Sensor Network (WSN) has been mainly focused on energy efficiency improvement, while interest on latency is relatively weak. However, end-to-end latency could be a critical limitation specifically in the multi-hop network such as wireless multimedia sensor networks. In this paper we propose a media access control scheme with distributed transmission power control to Improve end-to-end transmission latency as well as reduce power consumption in multi-hop wireless sensor networks. According to the simulation results, the proposed scheme is turned out to be an energy efficient scheme with improved end-to-end transmission latency.

• Journal of the Korean Vacuum Society
• /
• v.4 no.2
• /
• pp.194-200
• /
• 1995

2-3nm의 공간분해능을 갖는 전자에너지손실분광법(Electron Energy Loss Spectroscopy, EELS)을 이용하여, 전기적 특성조사된 YBa2Cu3O7-$\delta$ 고온초전도체 쌍결정의 결정경계(grain boundary)에서 산소의 조성변화를 조사하였다. Misorientation angle이 $14^{\circ}$, $28^{\circ}$,$ 30^{\circ}$인 3개의 쌍결정 중에서 Josephson junction 특성을 보인 $28^{\circ}$ 및 $30^{\circ}$결정경계에서의 oxygen 1s absorption edge는 결정내부에서의 oxygen 1s absorption edge와 매우 다름을 알 수 있었다. 이는 결정경계에서의 산소조성이 결정내부에 비해 낮음을 의미하며, 그 영역이 결정경계 부근 20-40nm로, coherence length에 비해 큼을 알 수 있다. 반면에, flux pinningxmr성을 보인 $14^{\circ}$결정경계에서의 oxygen 1s absorption edge는 결정내부에서와 별 차이를 보이지 않았다. 따라서 일반적으로 관찰되어온, misorientation angle이 큰 결정경계에서의 Josephson junction 특성은 결정경계 부근에서 산소의 조성이 낮아지는데에 기인하며, 그 원인은 결정경계면을 통해 산소가 out-diffusion되기 때문인 것으로 생각된다.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.6
• /
• pp.1-13
• /
• 2009

Photovoltaic conditioning systems normally use a maximum power point tracking (MPPT) technique to deliver the highest possible power to the load continuously when variations occur in the insolation and temperature. A unique method of tracking the maximum power points (MPPs) and forcing the boost converter system to operate close to these points is presented through deriving small-signal model and transfer function of boost converter considering input capacitor. This paper aims at modeling boost converter including fairly large equivalent series resistance(ESR) of input reservoir capacitor by state-space-averaging method and PWM switch model and compares both methods using Bode plots. In the future, properly designed controller for compensation will be constructed in 3kw real system for maximum photovoltaic power tracking control.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.2
• /
• pp.1-7
• /
• 2014

Generally, buck converter controller is designed to control the output voltage of the converter. However, design of the controller in a photovoltaic power conditioning system is different from theoretical design guideline. The controller in a photovoltaic power conditioning system controls the input voltage of the converter (the output voltage of the solar cell) to meet a maximum power point tracking (MPPT) performance. In this study, a new model for buck converter used in a photovoltaic power conditioning system is proposed, which is linearized after state-space averaging in each period. Also, mathematical expression of the modeled buck converter is interpreted separately as small and large signals; therefore its appropriateness is measured to design linear voltage and current controller.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.6
• /
• pp.1-12
• /
• 2017

The DC link of Grid-Connected 3-Phase 3-Level T-type Photovoltaic PCS (PV-PCS) consists of two series connected capacitors for using their neutral voltage. The mismatch between two capacitor characteristics and transient states happened in load change cause the imbalance of neutral voltage. As a result, PV-PCS performance is degraded and the system becomes unstable. In this paper, a mathematical model for analyzing the imbalance of neutral voltage is derived and a compensation method using offset voltage is proposed, where offset voltage adjusts the applying time of P-type and N-type small vectors. The validity of the proposed methods is verified by simulation and experiment.

• Journal of Internet Computing and Services
• /
• v.2 no.1
• /
• pp.39-48
• /
• 2001

In learning activities. research learning is mostly carried out in a laboratory. Learners can approach a learning process with ease and are given the chance to do the self-directed study one research experiments in advance by designing a process of research learning in the laboratory by a web-based simulation courseware. And this can offer a learner-centered model with which learners can share. exchange and interact information each other. Using a web in instructing and learning can be an appropriate implement of research and also gives learner-centered learning environment. This thesis is a study on design and implementation of a web-based simulation courseware for learning Kinetic energy through the research learning which is one of the self leading learning methods.