• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.8
• /
• pp.935-943
• /
• 2012

In accidents involving the collision of railway vehicles, there is a risk that structural members might penetrate the cab frame of the railway vehicle in the space in which the driver or passengers are seated. To reduce this risk, worldwide, studies on the collision of railway vehicles are underway. In North America, the Code of Federal Regulations (CFR) was revised in 2010 to include crush criteria for a collision and the corner post in an end frame. In this study, a crush analysis and crush test for a collision post and a crash analysis for a rigid cylinder were performed according to the CFR. The analysis and test results were compared and reviewed. This study aims to determine the usefulness of crush analysis for developing various end frames, and to understand the crush and crash characteristics and review the accuracy of the analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.435-438
• /
• 2012

Today, In all fields, As combination of ubiquitous computing-based technologies between electronic space and physical space, has been active trend research about wireless integration sensor network between sensors and wireless technology. Also, but in ship is underway research about Ship Area Network(SAN) of intelligent ship to integrate wireless technology, ship is required SAN-bridge technology of a variety of wired, wireless network integration and heterogeneous sensor and interoperability of the controller and SAN configuration management technology of remote control. Ship keep safe of all the surrounding environment including crew besides structural safety and freight management monitoring. In this paper, for monitoring design such as on climate change detection and temperature, pressure about various structures, there identify technology trends for routing and data aggregation to use energy efficiency in wireless sensor network. And to analyze self-organizing clustering method, study For wireless sensor network configuration in ship.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.99-105
• /
• 2010

Photovoltaic system is the core one among the new and renewable energy of the low Carbon and green growth. Recently, the necessity developing PV is emerging since its of less green hose gas emissions. However, a survey or research on the PV system has been hardly performed. It's not easy to find a appropriate location in consideration of environment. These circumstances encourages a systematic approach for the PV system development. The purpose of this study is to propose a methodology of the location analysis for developing PV system. With this, constraint and location criteria with weights of Analytic Hierarchy Process are established and quantification method of each factor is presented. The location analysis of PV system using the GIS were generalized and the results of analysis for redundant topographic features were presented as 3 criteria of the suitability rank.

• Solar Energy
• /
• v.12 no.3
• /
• pp.47-59
• /
• 1992

In the concentric tube type recuperator, which is the most typical type of radiation recuperator, installed on the exhaust-secion of industrial furnace, air flows between the adiabatic outer tube and the inner tube in which exhausted gas flows with high temperature. The waste heat of the exhausted gas is transferred to the inner tube, and transferred from the inner tube to the flowing air. The heat transfer by radiation In the concentric tube type recuperator is modeled using spherical harmonics approximation, namely, P-N method and numerically analyzed considering the effect of dynamic flow field. The results are compared with the existing empirical data. In addition, a theoretical method is presented for the analysis of the heat transfer characteristics of a recuperator with a reradiator installed in the inner tube, which causes re-radiant in the inner tube, and the characteristics of the recuperator is analyszed and defined.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.5
• /
• pp.67-74
• /
• 2007

The unsymmetrically layered artificial material model is consistently introduced to find the optimum topologies of the plate structures. Reissner-Mindlin (RM) plate theory is adopted to formulate the present 9-node plate element considering the first-order shear deformation of the plates. In the topology optimization process, the strain energy to be minimized is employed as the objective function and the initial volume of structures is adopted as the constraint function. In addition, the resizing algorithm based on the optimality criteria is used to update the hole size introduced in the proposed artificial material model. Several numerical examples are rallied out to investigate the performance of the proposed technique. From numerical results, the proposed topology optimization techniques are found to be very effective to produce the optimum topology of plate structures. In particular, the proposed unsymmetric stiffening layer model make it possible to produce more realistic stiffener design of the plate structures.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.137-148
• /
• 2012

In this paper, we proposed the location-aware coordinate routing algorithm for improving the performance of routing algorithm by using ZigBee in Smart Grid environment. A distributed address allocation scheme used an existing algorithm that has wasted in address space. The x, y and z coordinate axes from divided address space of 16 bit to solve this problems. However, coordinate routing does not take account of wireless link condition. If wiress link condition is not considered, when the routing table is updated, the nodes with bad link conditions are updated in the routing table and can be chosen as the next hop. This brings out the retransmissions because of received packet's errors. Also, because of these retransmissions, additional power is consumed. In this paper, we propose the location-aware coordinate routing algorithm considering wiress link condition, where reliable data transmission is made and the consumed enegy is minimize. and we compared and connected region and transition region of ZigBee location based routing in the aspect of average number of multi hops, subordinate packet delivery ratio, delay time, and energy consumption of proposed algorithm. It turned out that there were improvements in performances of each items.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.545-550
• /
• 2012

High Energy density metal powder has high melting point of oxide film. By this, the ignition source that can make a thermal effect of high-temperature during short time is needed to overcome ignition disturbance mechanism by oxide film. So effective ignition does not occurred with hydrocarbon ignitor, $H_2-O_2$ ignitor, high power laser. But steam plasma can be generate about 5000 K temperature field in short order. Because a steam plasma uses steam as the working gas, it is environmental-friendly and economical. Therefore in this study, we analyze steam plasma temperature field and radical species with optical emission spectroscopy method in order to apply steam plasma ignitor to metal combustion system and cloud particle ignition was identified in visual.

• Journal of Korean Society on Water Environment
• /
• v.38 no.1
• /
• pp.31-42
• /
• 2022

Dissolved organic matter (DOM), which changes according to various factors, is ubiquitously present from natural environments to engineered treatment systems. Only limited information is available regarding the environmental functions of DOM after bulk analyses are only applied for characterization. In this paper, latest DOM analytical techniques are briefly introduced, which include fluorescence excitation-emission matrix with parallel factor analysis (EEM-PARAFAC), size-exclusion chromatography with an organic carbon detector (SEC-OCD), carbon/nitrogen stable-isotope ratio, and Fourier transform-ion cyclotron resonance-mass spectroscopy (FT-ICR-MS). Recent examples of using advanced analyses to interpret the phenomena associated with DOM occurring in natural and engineered systems are presented here. Through EEM-PARAFAC, different components like protein-like, fulvic-like, and humic-like can be identified and tracked individually through the investigated systems. SEC-OCD allows researchers to quantify different size fractions. FT-ICR-MS provides thousands of molecular formulas present in bulk DOM samples. Lastly, carbon/nitrogen stable-isotope ratio offers reasonable tools for tracking the sources in environments. We also discuss the advantages and weakness of the above-mentioned characterizing tools. Specifically, they focus on single environmental factors (different sourced-DOM and interaction of sediment-pore water) or simple changes after individual treatment processes. Through collaboration with the advanced techniques later, they help the researchers to better understand environmental behaviors in aquatic systems and serve as essential tools for addressing various pending problems associated with DOM.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.508-519
• /
• 2021

In this study, a model was developed to predict the peak particle velocity (PPV) that affects people and the surrounding environment during blasting. Four machine learning models using the k-nearest neighbors (kNN), classification and regression tree (CART), support vector regression (SVR), and particle swarm optimization (PSO)-SVR algorithms were developed and compared with each other to predict the PPV. Mt. Yogmang located in Changwon-si, Gyeongsangnam-do was selected as a study area, and 1048 blasting data were acquired to train the machine learning models. The blasting data consisted of hole length, burden, spacing, maximum charge per delay, powder factor, number of holes, ratio of emulsion, monitoring distance and PPV. To evaluate the performance of the trained models, the mean absolute error (MAE), mean square error (MSE), and root mean square error (RMSE) were used. The PSO-SVR model showed superior performance with MAE, MSE and RMSE of 0.0348, 0.0021 and 0.0458, respectively. Finally, a method was proposed to predict the degree of influence on the surrounding environment using the developed machine learning models.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.118-118
• /
• 2023

물순환 과정의 구성요소 중 하나인 증발산(증발과 증산)은 각종 수자원시설물의 운영관리, 수자원계획 수립, 농업용 시설의 개발 및 운영관리 등에 필요한 매우 중요한 요소이다. 한편, 기후변화 등으로 '14~'19년 장기간 가뭄, '17년 가뭄상황에서도 태풍 '차바'에 의한 국지적 홍수, '20년 역대 최장기간 장마에 의한 대규모 홍수, '22년 태풍 '힌남노' 이후 남부지역 극심한 가뭄 등 가뭄과 홍수가 반복되어 물관리 여건이 매우 어려운 상황이다. 이러한 홍수/가뭄에 효과적으로 대응하기 위해 강우-유출 모형을 사용한다. 신뢰적인 예측결과를 얻기 위해서는 상세하고 정밀한 증발산량 추정이 필요하다. Penman-Monteith(PM) 기법으로 기준 증발산량을 산정하기 위해서는 최고·최저기온, 이슬점온도, 풍속, 일조시간 등의 기상자료가 필요하다. 이러한 자료는 전국 95개 ASOS 지점에만 얻을 수 있다. 계산된 95개 지점의 기준 증발산량은 티센망 등 방법으로 공간평균하여 활용한다. 95개 지점 자료만으로는 지역적 기상 특성을 반영하여 기준 증발산량을 산정하는데 한계가 있으며, 결국 강우-유출분석의 신뢰도 저하로 귀결된다. 본 연구는 기상청 ASOS 지점 외 AWS 590개 지점을 추가하여 기준 증발산량을 산정하여 공간적으로 상세화하였다. ASOS 지점들에 대해 PM 기법과 Hargreaves(HS) 기법으로 22년간의 일단위 기준 증발산량을 각각 계산하였다. 이들의 상관계수는 평균 0.85로 매우 높아, HS 기법으로 산정된 AWS 지점 결과의 추가사용이 적정하였다. 기온만을 사용하는 HS 기법, PM과 HS의 상관성 및 풍속을 반영한 2가지 보정 HS 기법으로 기준 증발산량을 계산하여 비교·분석하였다. 보정된 HS의 결과가 기존 HS 기법에 비해 오차가 적고, 자료의 편향성이 줄어드는 등 더 좋은 결과를 나타내었다. 따라서, 각종 수문분석에 보정 HS 기법을 AWS 지점에 확대·적용하고, ASOS 관측소의 PM 기법과 병행해 상세화하여 활용하면 수문분석의 신뢰성을 더욱 높일 수 있을 것이다.