• Tunnel and Underground Space
• /
• v.21 no.4
• /
• pp.297-306
• /
• 2011

In this paper, we performed thermodynamic energy balance analysis of the underground lined rock cavern for compressed air energy storage (CAES) using the results of multi-phase heat flow analysis to simulate complex groundwater-compressed air flow around the cavern as well as heat transfer to concrete linings and surrounding rock mass. Our energy balance analysis demonstrated that the energy loss for a daily compression and decompression cycle predominantly depends on the energy loss by heat conduction to the concrete linings and surrounding rock mass for a sufficiently air-tight system with low permeability of the concrete linings. Overall energy efficiency of the underground lined rock caverns for CAES was sensitive to air injection temperature, and the energy loss by heat conduction can be minimized by keeping the air injection temperature closer to the ambient temperature of the surroundings. In such a case, almost all the heat loss during compression phase was gained back in a subsequent decompression phase. Meanwhile, the influence of heat conductivity of the concrete linings to energy efficiency was negligible.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.5
• /
• pp.637-645
• /
• 2019

Global warming and a new energy policy request the energy saving and pollutant emission control in municipal level. Previous studies focus on transportation in the Seoul metropolitan area which can easily meet the policy goal by reducing it. This study expands the area of urban energy planning to the industries and land use which takes up most of energy use of the city. We empirically study the Busan metropolitan area's 5 years natural gas and electricity consumption data by the industries and land use. Results show that energy usage significantly depends on not only population but also urbanizing intensity and industrial category. This paper address that the policy maker need to pay attention on energy usage pattern of each sectors during the planning.

• The Transactions of the Korea Information Processing Society
• /
• v.13 no.2
• /
• pp.1-12
• /
• 2024

Modern cities are actively adopting smart city services to address various urban challenges. Geospatial information acts as the foundational infrastructure of smart cities, promoting the sustainable development of urban areas. Consequently, as the standardization and utilization of geospatial information increase, the efficiency and sustainability of smart city operations improve. To achieve this, collaboration among diverse stakeholders is crucial for delivering optimal smart city services based on geospatial information. This paper defines smart city services, focusing on transportation and building-energy domains, based on the life cycle of geospatial information technology. Emphasis is placed on the importance of applying and utilizing geospatial information standards. Additionally, this paper proposes the Smart City based on Geospatial Information standards (SCGI) framework to provide insights into standardizing smart city services mapped to geospatial information standards. This research suggests a new paradigm for standardizing smart city services using geospatial information standards to offer customized solutions, thereby discussing the future development possibilities of smart cities.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.159-172
• /
• 2014

As greenhouse gas emissions have been increasing in the world, global warming is being recognized as a cause of the global problems like climate change. This is closely associated the fossil fuels. Thus renewable energy has been brought to the attention of many people as the upcoming alternative energy source to cope with the fossil drain and increased environmental regulations. Especially, the solar energy among renewable energy has drastically increased. In this study, we calculate on daylight ratio about the solar energy for buildings based on digital surface model. The digital surface model was made using the spatial information data. And it was simulated the shadow analysis using SAS. Therefore, it was suitable places to utilize the solar energy in the Gyeongsan city. Consequently, the daylight ratio was considered important factor to select region of the industry of the solar light power generation.

• Spatial Information Research
• /
• v.20 no.4
• /
• pp.1-16
• /
• 2012

There is no doubt that the urban heat island (UHI) is a mounting problem in built-up environments, due to energy retention by the surface materials of dense buildings, leading to increased temperatures, air pollution, and energy consumption. To investigate the UHI, three-dimensional (3-D) information is necessary to analyze complex sites, including dense building clusters. In this research, 3-D building geometry information is combined with two-dimensional (2-D) urban surface information to examine the relationship between urban characteristics and temperature. In addition, this research introduces spatial regression models to account for the spatial spillover effects of urban temperatures, and includes the following steps: (a) estimating urban temperatures, (b) developing a 3-D city model, (c) generating urban parameters, and (d) conducting statistical analyses using both Ordinary Least-Squares (OLS) and Spatial Regression Models. The results demonstrate that 3-D urban characteristics greatly affect temperatures and that neighborhood effects are critical in explaining temperature variations. Finally, the implications of the results are discussed, providing guidelines for policies to reduce the UHI.

• Spatial Information Research
• /
• v.20 no.1
• /
• pp.91-103
• /
• 2012

Recently, there has been much interest in the middleware that can smoothly acquire and analyze Geosensor information which includes sensor readings, location, and its surrounding spatial information. In relation to development of the middleware, researchers have proposed various algorithms for energy-efficient information filtering in Geosensor networks and have proposed Geosensor web technologies which can efficiently mash up sensor readings with spatial information on the web, also. The filtering algorithms and Geosensor Web technologies have contributions on energy-efficiency and OpenAPI, however the algorithms and technologies could not support easy and rapid development of u-GIS applications that need various Geosensor networks. Therefore, we propose a new Geosensor network middleware that can dramatically reduce the time and cost required for development of u-GIS applications that integrate heterogeneous Geosensor networks. The proposed middleware has several merits of being capable of acquiring heterogeneous Geosensor information using the standard SWE and an extended SQL, optimally performing various attribute and spatial operators, and easily integrating various Geosensor networks. Finally, we clarify our middleware's distinguished features by developing a prototype that can monitor environmental information in realtime using spatial information and various sensor readings of temperature, humidity, illumination, imagery, and location.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.11a
• /
• pp.35-39
• /
• 2005

선형혼합분광분석(LSU, Linear Spectral Unmixing) 모델은 위성 영상의 한 화소 값이 공간 내에 포함된 다양한 지표 대상물의 반사에너지가 혼합된 결과로 나타난다는 가정을 통해 화소이하(Sub-Pixel) 단위의 영상 분석을 수행하는 알고리즘의 한 형태이다. 분석의 결과는 한 화소에 존재하는 순수 대상물(Endmember)의 비율로 나타나며, 최소제곱법을 이용하여 결과를 도출하는 것이 일반적인 방법으로 알려져 있다. 하지만, 최소제곱법을 이용한 선형혼합분광분석모델은 기본적인 가정을 만족시키지 못하며, Endmember를 사용자가 임의로 지정해야 하기 때문에 영상 분석에 많은 어려움이 있다. 이런 단점을 극복하기 위해 무감독으로 추출된 Endmember를 이용한 제약선형분광혼합분석(Constrained Linear Spectral Unmixing) 모델을 본 연구를 통해 제안하고자 한다. 결과를 통해, 무감독 제약선형분광혼합분석 모델은 선형분광혼합분석 모델에 비해 각각의 Endmember에 대하여 제약조건을 만족하는 점유비율(Abundance) 정보를 제공하였으나, 비슷한 Endmember를 중복 추출할 수 있는 가능성도 지니고 있음을 확인할 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1406_1407
• /
• 2009

Fowler-Nordheim의 전자 방출과 열전자 방출 메카니즘을 이용하여 절연유체 내 전계에 의한 도체의 음극에서 전자 방출현상과 열에 의한 열전자 방출현상을 고려하고 유한요소법(Finite Element Method)을 이용하여 해석하였다. 절연유체 내 공간전하에 대한 해석기법으로 푸아송 방정식, 양이온, 음이온, 전자에 대한 전하연속 방정식, 온도에 대한 열 확산 방정식으로 이루어진 5개의 지배방정식에 Fowler-Nordheim의 전계 방출과 Richardson-Dushman의 열전자 방출을 경계조건으로 부여하였다. 단자 전류는 유한요소법과 잘 부합하는 에너지법으로 계산되었다. 쌍 곡선형 PDE의 공간전하 전파에 대한 지배 방정식은 일반적으로 수치적인 불안정성을 가지므로 인공 확산 항을 고려하여 이를 해결하였다. 제안된 해석법은 세 개의 캐리어를 가진 x-y 좌표축의 2차원 평판 모델에 적용하여 그 유효성을 확인하였다.

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.109-124
• /
• 1993

본 연구의 목표는 임의의 3차원 사출성형 금형 공간내에서 단섬유 강화 플라스틱의 충전 공정에서의 과도기적 섬유방향성을 예측하는 수치해석 프로그램의 개발에 있다. Hele-Shaw 방정식에 단섬유에 의해서 추가된 응력을 고려한 Dinh-Armstrong의 모델을 도 입함으로써 새로운 충전과정의 압력 지배 방정식이 유도되었다. 새로운 압력지배 방정식은 단섬유에 의한 응력 때문에 몇 개의 새로운 항들을 포함하고 있다. 충전 과정의 해석은 새 로운 압력지배방정식과 에너지 방정식을 유한효소법과 유한 차분법을 이용하여 풀고 동시에 배향텐서(roientation tensor)의 변화 방정식을 4차 Runge-Kutta 방법을 이용하여 풀었다. 단섬유 배향 텐서를 텐서의 변환 법칙을 이용하여 임의의 3차원 금형 공간내의 모든유한요 소의 중심에서 두께방향의 모든유한 차분 격자를 따라 계산하였다. 이러한 방법으로 임의의 3차원 사출성형 금형 공간내에서 비등온 충전유동과 과도기적 3차원 섬유배향상태를 서로의 상호작용을 고려하여 수치 모사하여 다양한 유동 형태에 따른 단섬유 배향 상태의 변화에 대하여 알아보고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.206-208
• /
• 2011

플로팅건축물은 최근 지구온난화에 따른 해수면의 상승, 소득 증대 및 관광행태 변화에 따라 급증한 해양 레포츠 수요에 대응하는 효과적인 건축물이다. 플로팅건축은 프로그램, 형태, 건축규모, 층수, 위치, 접근방법, 이동성, 에너지 자립도 등 8가지 기준에 따라 유형 구분이 가능하다. 또한 시공된 주거시설을 대상으로 분석한 결과 플로팅건축의 디자인 특성은 (1) 2층 규모, (2) 면적 비율이 높은 데크, (3) 장방형의 균형감 있는 매스, (4) 조망 극대화, (5) 친수공간 확보, (6) 공간의 통합적 사용 및 합리적 면적 배분의 평면계획, (7) 수면 반사를 고려한 단면계획, (8) 모듈화 및 유닛화 등으로 정리할 수 있다.