• Nuclear Engineering and Technology
• /
• v.12 no.2
• /
• pp.99-105
• /
• 1980

The distribution of $^{55}$ Mn and $^{38}$ Cl recoil species following radiative neutron capture in permanganates, chlorates and perchlorates has been investigated by using ion-exchange chromatography method. The whole of the $^{55}$ Mn radioactivity in permanganates appeared in two valence states, the $^{38}$ Cl radioactivity in chlorates in two valence states and also the $^{38}$ Cl radioactivity in perchlorates in three valence states. Recoil energy was calculated. The internal conversion of $^{38}$ Cl isomer transition affects the retention value. The greater the radii of the cation, the higher is the probability of the recoil atom breaking through the secondary cage. In ammonium salt, the ammonium ion behaves as a reducing agent. Crystal structures with their greater free space have shown low retention.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.2
• /
• pp.163-172
• /
• 2009

BIM technologies based on three-dimensional parametric solid modeling can provide building industries with a wide range of information, and then enable not only to automate architectural drawings, detect clashes between building components, and estimate building materials, but also to manage effectively architectural and engineering information about building spaces, structures, energy, just-in-time delivery, facility management, and code checking. This paper presents an implementation to extract geometric data from IFC files, and validates the system with simple and complex buildings.

• Tunnel and Underground Space
• /
• v.15 no.4 s.57
• /
• pp.305-315
• /
• 2005

DDA (Discontinuous Deformation Anlaysis) is one of the latest numerical analysis which has merits of both FEM and DEM. In this research a new edge-to-edge contact algorithm was applied on DDA. With adoption of new edge-to-edge contact state definition, sub-algorithm was improved about open-close iteration, contact state judge, contact detecting, and friction forces acting on joints. Newly applied DDA was verified based on two different cases. The DDA results show good agreement with numerically predicted one.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.36-43
• /
• 2004

The purpose of this paper was development of modified horizontal daylight duct for reflector of light intake, location of outlet diffuser and size as applicable daylighting system for buildings and, verified applicable possibility base on analysis of daylighting performance through full-scale model test. Experimental result showed that ratio of illumination for light duct was measured 0.3∼0.4％ in interior of a room on clear sky. Also, light duct had wide distribution of illumination than duct about 150[cm] and was decided efficient lighting energy saving because of high daylight performance in case of application actual building during daytime.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.1
• /
• pp.102-107
• /
• 2011

LED-based lighting motivated by significant energy savings provides an opportunistic development of widespread free-space optical communications. Their transceivers have a variety of competitive advantages over RF including high bandwidth density, reliability, lower energy consumption, and long lifetime. But, it is difficult for existing buildings and structures such as ships and vehicles to install the communication cable to the ceiling. In this paper, controller area network (CAN)-based LED lighting communication systems were proposed. Results indicate the viability of developing inexpensive CAN interface modules and transceivers might be embedded in lighting products to support the indoor wireless networking.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2010.04a
• /
• pp.227-227
• /
• 2010

기존 도공지 생산 공정에서 널리 사용되던 블레이드 도공방식을 대체할 수 있을 것으로 기대되는 커튼코팅 방식은 스크래치, 스트릭, 미스팅, 블레이드의 마모등을 발생시키지 않고 고고형분 도공이 가능하며 우수한 커버리지를 갖는 도공층을 형성시킬 수 있다는 장점을 갖고 있다. 뿐만 아니라 하나의 코팅 유닛에서 여러개의 도공층을 한번에 형성시킬 수 있어 설비투자비용 및 건조에너지, 공간활용도 절감 측면에서도 한층 유리하다. 커튼 코팅 방식에서 도공액의 유동은 도공액이 필름 형태로 사출되는 sheet forming zone, 도공액 커튼이 낙하하는 curtain flow zone, 도공액 커튼이 원지와 접촉하는 impingement zone으로 나뉜다. 커튼 코팅이 이루어지기 위해서는 sheet forming zone과 curtain flow zone에서 도공액이 얇은 막 상태를 안정적으로 유지하고 impingement zone에서는 고속으로 이송되는 도공원지에 의한 급격한 신장 조건에서 도공액 필름이 끊어지지 않고 유지되어야 한다. 이를 위해 유화제를 통해 동적 표면 장력을 낮초고 rheology modifier를 통해 점도 및 신장점도를 조절해 도공액의 커튼 안정성을 부여하는 연구가 보고된 바 있다. 도공액 제조시 바인더로 널리 사용되는 S/B 라텍스는 입도, 유리전이온도, 표면전하 등 그 특성을 달리하여 제조할 수 있으며 이러한 특성에 따라 도공액의 점도와 같은 유변특성이 변화하여 도공액의 커튼 안정성에 영향할 것으로 예상된다. 따라서 본 연구에서는 입자경과 유리전이온도, 카르복실화 정도 등을 달리한 다양한 S/B 라텍스를 사용하여 유변특성을 달리한 도공액을 제조하고 커튼 안정성의 변화를 살펴보고자 하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.178-178
• /
• 2013

고체내의 결함을 분석하기 위한 장비로는 대표적으로 DLTS (deep level transient spectroscopy)를 이용하여 깊은 준위 결함의 활성화에너지를 구하는 분석법, 투과전자현미경을 이용한 박막의 결정살창 분석법, photoluminescence나 electroluminescence를 이용하여 광학적인 방법으로 결함을 분석하는 방법, 마지막으로 광전류 측정을 통하여 결함을 분석하는 방법 등이 있다. 이 중에서도 빛에 의해서 증가되는 광전류를 이용한 결함 분석 방법은 과거에는 종종 시행되어 왔으나 최근에는 거의 연구되어지고 있지 않고 있다. 고체 내의 많은 결함들이 빛에만 반응하는 결함도 있으며 전기적인 측정을 통해서만 발견되는 결함이 존재하기 때문에 모든 부분을 다 만족시키는 방법은 찾기가 힘들다고 알려져 있다. 한편, ZnO는 octahedral 구조로 공간이 비어있기 때문에 여러 가지 결함이 존재하는데, 그 중에서 valence band 바로 위 0.3~0.5 eV에 존재하는 결함 준위는 Zn 빈자리에 의한 결함으로 이론적으로만 밝혀졌을 뿐 실험적으로는 현재까지 발견되어지고 있지 않다. 본 연구에서는 광전류를 이용하여 n-ZnO/p-Si과 n-ZnO/p-GaN p-n 접합 다이오드 내의 결함에 대한 연구를 진행하였다. ZnO를 UHV 스퍼터링 방법으로 성장하였으며 ZnO의 결함의 양을 조절하기 위해 박막의 두께와 증착할 때의 기판 속도 등을 조절하였다. 이렇게 성장된 ZnO 기반의 다이오드를 광전류 측정을 이용하여 결함을 분석하였다. 실험결과 420 nm 파장의 빛을 다이오드에 주사하였을 때 광전류가 크게 증가하는 것을 확인하였으며 이것은 이론적으로만 주장되어져 왔던 Zn 빈자리 결함에 의한 것으로 판단되었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.1
• /
• pp.21-31
• /
• 2005

In this study, derivation is made of a one-grid source function for the extended Boussinesq equations of Nwogu (1993) in order to generate nonlinear waves internally. The energy velocity approach used in the line source method is verified analytically by the fractional step splitting method. The source function method is verified by generating accurately nonlinear waves as well as linear waves for horizontally one-dimensional cases. It is found that numerical solutions by the source function method are the same as those by the line source method.

• Journal of Korea Multimedia Society
• /
• v.1 no.2
• /
• pp.194-203
• /
• 1998

In this paper, a new DCT-VQ method is proposed which can solve the problems of VQ such as the degradation of edge and enormous calculations. VQ is carried in DCT domain but spatial domain in order to protect the degradation of edge. DCT makes high correlated image data decorrelated and the energy concentrated on a few coefficients. In DCT domain, the DC coefficient is quantized with 8 bits uniform scalar quantizer and the AC coefficients are divided to three regions and coded with vector qiantizer for considering edge components. For the decrease of the calculation and memory, the vectors for three region have small dimension of $1{\times}7$ and use the same codebook. Thus, the proposed method can fully express the edge components by considering AC coefficients in DCT domain and decrease the calculation and memory be reducing the dimension of vectors.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.1-9
• /
• 2007

This study proposes to increase the energy-saving effects by reducing excessive intensity of radiation of artificial lighting through analyzing daylight incident. A photosensor sends amounts of detected luminous flux to digital control unit(DCU) as a signal and then, it can decide dimming ratios, received a proper dimming signal from DCU. Generally it is effective to control artificial lighting with the different control ratio of each zone by setting a photosensor as same number and rows as artificial lighting. However, it is ineffective to do in initial costs of systems aspect in offices. As a result of grasping the distribution of daylight previously and analyzing daylight and dimming data, we can dim different dimming ratios to each zone of artificial lighting by a single photosensor.