• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.81-96
• /
• 2018

In this study, physicochemical properties of the natural jadeite powder were investigated and also the wash-off pack and liquid foundation containing the jadeite powder were prepared. In addition, each of these formulations was evaluated by various functional effects, sensory evaluation, stability and skin safety. In the wash-off pack, the far-infrared ray emissivity and radiation energy values increased as a function of the jadeite powder content. At a 3% jadeite powder content, the skin temperature increased by about $0.5^{\circ}C$ when the jadeite powder-containing formulation was applied to the skin. Besides, the chroma of the liquid foundation containing the jadeite powder more clearly expressed the original color of the skin. Moisture content measurements of the wash-off pack and liquid foundation containing the jadeite powder showed the highest moisture uptake of 5.0% and 63.0%, respectively. In sensorial test, the wash-off pack formulations containing the jadeite powder demonstrated improved affinities toward a skin, adherency, and moistness and combatted itching. The liquid foundation containing jadeite powder showed also improved affinities except for the coverage when compared to control formulations. Furthermore, the stability evaluation for 8 weeks revealed neither discoloration nor separation phenomenon for the formulations containing the jadeite powder. Moreover, the pH was found to be stable up to 8 weeks and the viscosity up to 4 weeks. Skin safety assessments showed that all formulations containing the jadeite powder were non-irritating. These results suggest that the jadeite powder as an inorganic pigment may serve as a new multi-functional cosmetic ingredient with stability and safety.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.23-33
• /
• 2001

The utility tunnels are the important facility as a mainstay of country because of the latest communication developments. However, the utilities tunnel is difficult to deal with in case of a fire accident. When a cable burns, the black smoke containing poisonous gas will be reduced. This black smoke goes into the tunnel, and makes it difficult to extinguish the fire. Therefore, when there was a fire in the utility tunnel, the central nerves of the country had been paralyzed, such as property damage, communication interruption, in addition to inconvenience for people. This paper is based on the fire occurred in the past, and reenacting the fire by making the real utilities tunnel model. The aim of this paper is the scientific analysis of the character image of the fire, and the verification of each fire protection system whether it works well after process of setting up a fire protection system in the utilities tunnel at a constant temperature. The fire experiment was equipped with the linear heat detector, the fire door, the connection water spray system and the ventilation system in the utilities tunnel. Fixed portion of an electric power supply cable was coated with a fire retardant coating, and a heating tube was covered with a fireproof. The result showed that the highest temperature was $932^{\circ}c$ and the linear heat detector was working at the constant temperature, and it pointed at the place of the fire on the receiving board, and Fixed portion of the electric power supply cable coated with the fire retardant coating did not work as the fireproof. The heating tube was covered with the fireproof about 30 minutes.

• Journal of the Korean Society of Radiology
• /
• v.5 no.2
• /
• pp.93-96
• /
• 2011

Currently, the development of direct conversion radiation detector using photoconductor materials is progressing in widely. Among of theses photoconductor materials, mercuric iodide compound than amorphous selenium has excellent absorption and sensitivity of high energy radiation. Also, the detection efficiency of signal generated in photoconductor film varies by electric filed and geometric distribution according to top-bottom electrode size. Therefore, in this work, the x-ray detection characteristics are investigated about the size of top electrode in $HgI_2$ photoconductor film. For sample fabrication, to solve the problem that is difficult to make a large area film, we used the spatial paste screen-print method. And the sample thickness is $150{\mu}m$ and an film area size is $3cm{\times}3cm$ on ITO-coated glass substrate. ITO(Indium-Tin-Oxide) electrode was used as top electrode using a magnetron sputtering system and each area is $3cm{\times}3cm$, $2cm{\times}2cm$ and $1cm{\times}1cm$. From experimental measurement, the dark current, sensitivity and SNR of the $HgI_2$ film are obtained from I-V test. From the experimental results, it shows that the sensitivity increases in accordance with the area of the electrode but the SNR is decreased because of the high dark current. Therefore, the optimized size of electrode is importance for the development of photoconductor based x-ray imaging detector.

• Journal of Korean Home Economics Education Association
• /
• v.17 no.4 s.38
• /
• pp.133-156
• /
• 2005

This study clarifies the concept of the education content relevance in order to evaluate the content relevance of Technology & Home Economics in a secondary school, and design its standards based on the preceding study. In other words, four standards such as the amount of studying content, the degree of difficulty, the validity of contents and the sequence of contents are established. Also, a survey on the current status of nationwide units targeting students, teachers, and professors was conducted to collect actual data about relevance evaluation. The results are as follows. First, as for the evaluation in terms of the amount of studying content, the majority of respondents answered that it decreased by about $30\%$ when compared to the 6th Technology & Home Economics Curriculum However, middle school teachers pointed out that the number of classes is not enough considering the fact that it's an activity-oriented subject. So, they acknowledged that the amount of study time during a Technology Sl Home Economics class is 'quite a lot.' Second, the evaluation in the degree of difficulty is divided into two responses. Teachers responded that it's reasonable overall, but according to students, it's difficult. Especially, the chapters that students don't understand well including 'The Elements of Draftsmanship,"' 'Understanding of Machinery,' 'Electronics & Electricity Technology,' and 'Energy & Transportation Technology.' In the Home Economics area, 'The Design of Home Life' is the only chapter that students don't understand well. Third, as for the validity of contents, the chapters that were not considered as important considering the objective of Technology Sl Home Economics Curriculum include 'The Elements of Draftsmanship,' 'Computer & Processing,' and 'The Management of Resources and Environment.' Fourth, as for the sequence of contents, the survey was conducted including the name of the course asone of the survey items. The majority of teachers wanted it as it is, but the Professors of education colleges who wanted the 3rd name to connect the course with the elementary school course was a little more $(50.5\%)$ than the ones who don't want any changes $(45.5\%)$. The follow-up study should correct and complement the standards that this study suggested through analytic and critical review according to the character & goal of the subject. Based on such standards, the evaluation of content relevance should be continued to realize the quality control of the curriculum systematically.

• Journal of Nutrition and Health
• /
• v.47 no.1
• /
• pp.51-66
• /
• 2014

Purpose: The objective of this study was to investigate the differences of sodium intake in the diet according to the kind of meal, food group, and dish group. Methods: A dietary survey was conducted using the 24-hour recall method from April to May, 2009. The study subjects consisted of 701 elementary and 1,184 middle school students in the Jeju area. Mean sodium intake and the percentage contribution of meals and each dish and food group to daily sodium intake were calculated. Results: The daily sodium intake was 2,868.4 mg and 3,032.5 mg in elementary and middle school students. For elementary school students, breakfast, lunch, dinner, and snack provided approximately 18.0%, 35.1%, 32.8%, and 14.1% of total daily sodium intake, and for middle school students, 15.3%, 40.2%, 29.1%, and 15.5%, respectively. Major food groups for sodium intake were spices (1,252.5 mg in elementary, 1158.0 mg in middle school students), vegetables and their products (409.0 mg, 495.6 mg), cereal and grain products (322.4 mg, 647.8 mg), and fish and shellfish (255.3 mg, 336.6 mg). Except cereal and grain products, sodium intake of the food groups mentioned above was greater at lunch and dinner than at breakfast and snack. And, the elementary and middle school students obtained 5.9% and 9.8% of total daily sodium intake from cereal and grain products at snack. Among the 29 dish groups, the highest dish groups contributing to dietary sodium intake were soup and stew and tang/jeongol, consuming 19.8% (elementary school students) and 25.4% (middle school students) of daily sodium intake. The following major dish groups contributing to dietary sodium intake, in order, were kimchi, seasoned vegetables, grilled dish, stir-fried dish, and $\grave{a}$ la carte. By meals, the percentage of sodium intake from soup, kimchi, stew, fried dish, and stir-fried dish at school lunch was high, from noodles, grilled dish, and $\grave{a}$ la carte at dinner, and from bakery/snacks and noodles at snack. Conclusion: Sodium intake from the various side dishes at school lunch was high and noodles and bakery/snacks were popular snack foods in elementary and middle school students in Jeju area. In order to lower the intake of sodium, students need to be educated about eating less soup and choosing better snacks.

• Resources Recycling
• /
• v.13 no.1
• /
• pp.47-53
• /
• 2004

As a basic study of the re-using molten converter slag as an ordinary portland cement by conversion process, molten slag and sintered CaO pellet was reacted each other. The dissolution rate of the sintered CaO pellet into the molten slag was measured and the changes of the reaction layer was also investigated. The converter slag reagent-grade $SiO_2$ added was melted and hold for 30 minutes in MgO crucible between $1350∼1500 ^{\circ}C$. Then sintered CaO pellet heated at the same temperature was dipped into the molten slag and hold for 10∼30 min. After the reaction, the crucible was cooled in air and the specimen was cut off to the horizontal direction of the crucible. The dissolution rate of CaO pellet was measured by the change of the radius of sintered CaO pellet and the interface layer was observed by SEM/EDX and XRD. The dissolution rate of sintered CaO pellet contacted with the slag of basicity 1 was 9.8 $\mu\textrm{m}$/min at $1350^{\circ}C$ and increased to 18.0 $\mu\textrm{m}$/min at $1500^{\circ}C$. The rate was slightly decreased to 7.6 $\mu\textrm{m}$/min at $1350^{\circ}C$ and 15.0 $\mu\textrm{m}$/min at $V^{\circ}C$ in the slag of basicity 2. The dissolution rate of CaO in converter slag was followed to the rule of Arrhenius' temperature dependency, and the apparent activation energy of the dissolution of CaO was 36 kcal/mole. In case of the slag basicity of 1, the thickness of $C_2$S layer was 64-118 $\mu\textrm{m}$ and the thickness of $C_3$S was 28∼90 $\mu\textrm{m}$ for 10∼30 minutes at $1500^{\circ}C$. And the thickness of the $C_3$S layer was 90∼120 $\mu\textrm{m}$ at the same conditions in the slag basicity of 2.

• Korean Journal of Cognitive Science
• /
• v.13 no.3
• /
• pp.1-10
• /
• 2002

This study was performed to analyze the physical attributes of the faces and affective words on the fares. For analyzing physical attributes inside of a face, 36 facial features were selected and almost of them were the lengths or distance values. For analyzing facial contour 14 points were selected and the lengths from nose-end to them were measured. The values of these features except ratio values normalized by facial vortical length or facial horizontal length because the face size of each person is different. The principal component analysis (PCA) was performed and four major factors were extracted: 'facial contour' component, 'vortical length of eye' component, 'facial width' component, 'eyebrow region' component. We supposed the five-dimensional imaginary space of faces using factor scores of PCA, and selected representative faces evenly in this space. On the other hand, the affective words on faces were collected from magazines and through surveys. The factor analysis and multidimensional scaling method were performed and two orthogonal dimensions for the affections on faces were suggested: babyish-mature and sharp-soft.

• Journal of radiological science and technology
• /
• v.35 no.4
• /
• pp.335-343
• /
• 2012

Intensity-modulated radiotherapy(IMRT) have the ability to provide better dose conformity and sparing of critical normal tissues than three-dimensional radiotherapy(3DCRT). Especially, with the benefit of health insurance in 2011, its use now increasingly in many modern radiotherapy departments. Also the use of linear accelerator with high-energy photon beams over 10 MV is increasing. As is well known, these linacs have the capacity to produce photonueutrons due to photonuclear reactions in materials with a large atomic number such as the target, flattening filters, collimators, and multi-leaf collimators(MLC). MLC-based IMRT treatments increase the monitor units and the probability of production of photoneutrons from photon-induced nuclear reactions. The purpose of this study is to quantitatively evaluate the dose of photoneutrons produced from 3DCRT and IMRT technique for Rando phantom in cervical cancer. We performed the treatment plans with 3DCRT and IMRT technique using Rando phantom for treatment of cervical cancer. An Rando phantom placed on the couch in the supine position was irradiated using 15 MV photon beams. Optically stimulated luminescence dosimeters(OSLD) were attached to 4 different locations (abdomen, chest, head and neck, eyes) and from center of field size and measured 5 times each of locations. Measured neutron dose from IMRT technique increased by 9.0, 8.6, 8.8, and 14 times than 3DCRT technique for abdomen, chest, head and neck, and eyes, respectively. When using IMRT with 15 MV photonbeams, the photoneutrons contributed a significant portion on out-of-field. It is difficult to prevent high energy photon beams to produce the phtoneutrons due to physical properties, if necessary, It is difficult to prevent high energy photon beams to produce the phtoneutrons due to physical properties, if necessary, it is need to provide the additional safe shielding on a linear accelerator and should therefore reduce the out-of-field dose.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.90-93
• /
• 2011

Purpose: A Pixelated BSGI gamma camera has features to enhance resolution and sensitivity and minimize the distance between detector and organs by narrow FOV. Therefore, it is known as useful device to examine small organs such as thyroid, parathyroid and gall bladder. In general, when we would like to enlarge the size of images and obtain high resolution images by gamma camera in nuclear medicine study, we use pinhole collimator. The purpose of this study is to evaluate the usefulness of Pixelated BSGI gamma camera and to compare to it using pinhole collimator in thyroid scan which is a study of typical small organs. Materials and methods: (1) The evaluation of sensitivity and spatial resolution: We measured sensitivity and spatial resolution of Pixelated BSGI with LEHR collimator and Infinia gamma camera with pinhole collimator. The sensitivity was measured by point source sensitivity test recommended by IAEA. We acquired images considering dead time in BSGI gamma camera for 100 seconds and used $^{99m}TcO4-\;400{\mu}Ci$ line source. (2) The evaluation of thyroid phantom: The thyroid phantom was filled with $^{99m}TcO4-$. After set 300 sec or 100 kcts stop conditions, we acquired images from both pixelated BSGI gamma camera and Infinia gamma camera with LEHR collimator. And we performed all thyroid studies in the same way as current AMC's procedure. Results: (1) the result of sensitivity: As a result, the sensitivity and spatial resolution of pixelated BSGI gamma camera were better than Infinia's. The sensitivities of pixelated BSGI and Infinia gamma camera were $290cps/{\mu}Ci$ and $350cps/{\mu}Ci$ respectively. So, the sensitivity of pixelated BSGI was 1.2 times higher than Infinia's (2) the result of thyroid phantom: Consequently, we confirmed that images of Pixelated BSGI gamma camera were more distinguishable between hot and cold spot compared with Infinia gamma camera. Conclusion: A pixelated BSGI gamma camera is able to shorten the acquisition time. Furthermore, the patients are exposed to radiation less than before by reducing amount of radiopharmaceutical doses. Shortening scan time makes images better by minimizing patient's breath and motion. And also, the distance between organ and detector is minimized because detector of pixelated BSGI gamma camera is small and possible to rotate. When patient cannot move at all, it is useful since device is feasible to move itself. However, although a pixelated BSGI gamma camera has these advantages, the effect of dead time occurs over 2000 cts/s since it was produced only for breast scan. So, there were low concentrations in organ. Therefore, we should consider that it needs to take tests to adjust acquisition time and amount of radiopharmaceutical doses in thyroid scan case with a pixelated BSGI gamma camera.

• Food Science of Animal Resources
• /
• v.32 no.6
• /
• pp.828-834
• /
• 2012

The present study has been conducted to investigate the effects of feeding seleniferous whole crop barley (WCB) to finishing pigs on their growth performance, blood and carcass characteristics as well as on tissue selenium deposition. A total of 40 cross-bred barrows ((Landrace${\times}$Yorkshire)${\times}$Duroc) were allotted to five replicates of four treatments. Each replicate was arranged to 2 pigs per pen; the experimental period lasted for 6 weeks. The finishing pigs were fed diets containing 0.1 (non-seleniferous WCB as a control), 0.2, 0.4 and 0.6 ppm of selenium (Se) by supplementing the diets with seleniferous WCB. The isonitrogenous and isocaloric diets containing 5% non-seleniferous or seleniferous WCB were formulated. Feeding seleniferous WCB did not affect (p<0.05) the feed intake and BW gain. Total blood lipid concentration was significantly (p<0.05) decreased with increasing Se levels. Total blood cholesterol concentration for the control was significantly (p<0.05) higher than that for 0.4 and 0.6 ppm of Se treatments. Increasing the Se levels in WCB significantly (p<0.05) decreased blood triglyceride concentration; however, the levels increased immunoglobulin G and selenium concentrations. Feeding seleniferous WCB did not affect the carcass rate, backfat thickness and meat quality as well as yield grades. The Se concentration in the kidney, liver and loin were significantly (p<0.05) increased with increasing levels of seleniferous WCB. The results indicated that feeding seleniferous WCB may improve the blood characteristics related to lipid metabolism and thus, could produce selenium-fortified pork. Moreover, it is shown that the dietary optimal selenium level to depose selenium in porcine tissues by utilizing seleniferous WCB would be 0.4 mg of Se/kg of ration. Moreover, when 100 g of pork produced from pigs raised under such condition is served to consumers, it meets the minimum recommended daily requirements (40 ${\mu}g$) of dietary selenium proposed by the World Health Organization (1996).