• Applied Chemistry for Engineering
• /
• v.21 no.6
• /
• pp.664-669
• /
• 2010

The forest area of domestic is 6370304 ha, which covers 70% of the whole country, and especially Gangwon-do is remarkably larger than other Province. A thick forest of the country has the most basic component among other natural environments as well as it has invaluable worth to human being such as scientific research and educational value. However due to the breakout of forest fire since 1990s, the loss of trees, destruction of natural environment and ecology, economic damage have been occurring and its scale also has become larger. The causes of becoming larger in scale are resulted from forest components which mainly consist of needle leaf trees, wide leaf trees, fallen leaves, herbaceous plants so that it has been a direct cause for forest fire. However, few research on combustion and pyrolysis characteristics has been done in domestic and abroad. The study on the combustion and pyrolysis for Pinus densiflora which are typical needle leaf trees has been tried using TGA. Pinus desiflora started to being ignited at around $162^{\circ}C$ and pyrolysis was done at around $197^{\circ}C$. Differential method was applied to calculate activation energy and frequency factor according to the variation of conversion. Activation energy in pyrolysis was increased from 79 kJ/mol to 487 kJ/mol with increasing conversion and average activation energy was 195 kJ/mol. The activation energy in combustion was decreased from 148 kJ/mol to 133 kJ/mol.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1205-1212
• /
• 2000

The effect of temperature on the sources of organic acids and sludge when phosphorus was biologically released was evaluated in this study. The sludge used in this study was obtained from sequencing batch reactor processing the swine wastewater. Temperature is one of the most important parameters influencing the phosphorus release. As a result, the rate of phosphorus released was increased as the temperatures were increased from 5 to $30^{\circ}C$ regardless of the sources of organic acids used. Under anaerobic conditions, as acetate, propionate, glucose, and domestic wastewater were used as the sources of organic acids, the corresponding activation energy($E_a$) values were 49.83, 55.82, 54.61, and 45.44 KJ/mol, respectively. Temperature coefficient($\theta$) values were 1.0676, 1.0826, 1.0748, and 1.0698, respectively. Therefore, the rate of phosphorus released was increased as temperature was increased, whereas, the effect, of the sources of organic acids and temperature on the activation energy and temperature coefficient values were minimal. When the sludge previously adapted to acetate as external organic source was used, the activation energy and temperature coefficient values were 44.94 KJ/mol and 1.0570 respectively. The effect of temperature was minimal. These values obtained from the sludge previously adapted to acetate were smaller than those from the sludge not previously adapted to the same organic acid. This suggest that the sludge previously adapted to acetate was less dependent on temperature than that not adapted to the acetate.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.4
• /
• pp.394-401
• /
• 2005

A nonthermal plasma-assisted fuel reformer was developed and the effects of operating variables on the performance of this reformer were studied. The $H_2$-rich reformed gas from the reformer was injected into a diesel engine under an idle condition and the effects of the amount of injected gas on the NO and soot reduction were investigated. It was found that with increasing electric power consumption, the degree of facility of ignition of the reforming reaction in the reformer could be enhanced. The performance of the reformer including $H_2$ concentration, $H_2$ recovery, and energy conversion was affected only by the O/C mole ratio. This was because the equilibrium reaction temperature was governed by the O/C mole ratio. With increasing O/C mole ratio, the $H_2$ recovery and energy conversion passed through the maximum values of 33.4% and 66%, respectively, at an O/C mole ratio between 1.2 and 1.5. The reason why the $H_2$ recovery and energy conversion increased with increasing O/C mole ratio when the O/C mole ratio was lower than $1.2{\sim}1.5$ appeared to be that the complete oxidation reaction occurred more enough with increasing O/C mole ratio in this low O/C mole ratio range and accordingly the reaction temperature increased. Whereas the reason why the $H_2$ recovery and energy conversion decreased with increasing O/C mole ratio when the O/C mole ratio was higher than $1.2{\sim}1.5$ appeared to be that the complete oxidation reaction was further advanced and the $H_2$ recovery and energy conversion decreased. As the weight ratio of reformed diesel to total diesel which entered the diesel engine was increased to $18.2{\sim}23.5%$, NO and soot reduction efficiencies increased and reached as values high as 68.5% and 23.5%, respectively.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.596-604
• /
• 2019

This study conducted a sediment culture experiment to investigate the effects of sediment oxygen demand (SOD) and environmental factors on sediment and water quality. We installed a leaching tank in the laboratory, cultured it for 20 days, and analyzed the relationship between P and Fe in the sediment. As a result, the dissolved oxygen of the water layer decreased with time, while the oxidation-reduction potential of the sediment progressed in the negative direction to form an anaerobic reducing environment. The SOD was measured to be 0.05 mg/g at the initial stage of cultivation and increased to 0.09 mg/g on the 20th day, indicating the tendency of increasing consumption of oxygen by the sediment. The change is likely to have caused by oxygen consumption from biological-SOD, which is the decomposition of organic matter accumulated on the sediment surface due to the increase of chl-a, and chemical-SOD consumed when the metal-reducing product produced by the reduction reaction is reoxidized. The correlation between SOD and causality for sediment-extracted sediments was positive for Ex-P and Org-P and negative for Fe-P. The analysis of the microbial community in the sediment on the 20th day showed that anaerobic iron-reducing bacteria (FeRB) were the dominant species. Therefore, when the phosphate bonded to the iron oxide is separated by the reduction reaction, the phosphate is eluted into the water to increase the primary productivity. The reduced substance is reoxidized and contributes to the oxygen consumption of the sediment. The results of this study would be useful as the reference information to improve oxygen resin.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.503-509
• /
• 2018

In this study, we used the ultrasonic extraction process as a method to extract antioxidant substances from kudzu, and measured the content of iso-flavonoids puerarin, daidzein, daidzin contained in kudzu. The response surface methodology which is a statistical analysis method for optimizing the extraction amount of iso-flavonoids from the kudzu and the process condition for maximizing the yield was applied. It is the final objective of this study to effectively derive the condition of the process that matches the target response with a minimum number of experiments and analyze the effect of each process condition on the response. In the response surface methodology, the central composite design was applied and the optimum condition was analyzed, and the three independent variables were set to ultrasonic irradiation time, volume ratio of ethanol/ultrapure water, ultrasonic irradiation power. Using the response surface methodology, the optimum conditions with the maximum extraction yield and the content of iso-flavonoids were evaluated as ultrasonic irradiation time (24.75 min), ethanol / ultrapure water volume ratio (39.75 vol%), ultrasonic irradiation power (592.36 W). The overall satisfaction level appears as high as 0.8938, which is recognized at a significance level within 5%. As a result of analyzing the optimization process, it was confirmed that the ultrasonic irradiation time is the factor that most affects the responses.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.58-67
• /
• 2008

Topography factors, as homeostasis variables at forest fire, affect the formation of fuel load patterns, atmospheric phenomena and forest fire behavior. Examination of the correlation between landforms and fire severity is important to decision making for fire hazard analysis and fighting strategies. In this study, fire severity was analyzed using Normalized Burn Ratio(NBR) derived from pre- and post-fire Landsat TM/+ETM images and landform were classified based on Topographic Position Index(TPI) in Samcheok(2000), Cheongyang(2002), and Yangyang(2005) forest fire regions. F-tests and Duncan's multi-range test between landform and fire severity showed that fire severities of headwater, high ridges, and upper slopes is higher than ones of local ridges, midslope ridges, and plains. Fire severity were more sensitive in coniferous forest than broadleaf forests.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.7
• /
• pp.801-809
• /
• 2007

Fly ash and blast furnace slag are an industrial by-product that can be alkali-activated to yield adhesive and cementitious materials, whose production is less energy-intensive and emits less $CO_2$ than ordinary Portland cement manufacture. A laboratory investigation was carried out to evaluate the effect of alkali-activating conditions on compressive strength of fly ash/slag cement and the acid corrosion resistance of this cement. Two alkali activator solution, NaOH and waterglass + NaOH solutions, were used. Waterglass concentration was the factor that gave the highest compressive strength in all tests. The next significant factor was the NaOH concentration, followed by curing temperature. Acid corrosion resistance of FC(fly ash cement) and FSC(fly ash/slag cement), such as sulfuric$(H_2SO_4)$ and hydrochloric acid(HCl), was for better than Portland cement(PC).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.9
• /
• pp.807-815
• /
• 2017

Auxetic structures with negative Poisson's ratio can be used to achieve high mechanical properties in energy absorption and destruction toughness. In this paper, we aim to design an auxetic structure which has a high negative Poisson's ratio and a stiffness over 50N/mm by using an optimization method. Length(L), thickness(t) and angle(${\theta}_1$, ${\theta}_2$) of an auxetic pyramid are the design parameters, and also stress, Poisson's ratio and stiffness are thr reaction factors. We used Box-Behnken method and conducted 4 factors - 3 levels experiment design. Finite element models are analyzed by using Edison program CSD_EPLAST.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.457-469
• /
• 2009

Applicability of bioleaching techniques using a sulfur-oxidizing bacteria, Acidithiobacillus thiooxidans, for remediation of shooting range soil contaminated with toxic heavy metals was investigated. The effects of sulfur concentration, the amount of bacterial inoculum and operation temperature on the efficiency of heavy metal solubilization were examined as well. As sulfur concentration and the amount of bacterial inoculum increased, the solubilization efficiency slightly increased; however, significant decrease of heavy metal extraction was observed with no addition of sulfur or bacterial inoculum. Bacteria solubilized the higher amount of heavy metals at $26^{\circ}C$ than $4^{\circ}C$. Lead showed the highest removal amount from the contaminated soil but the lowest removal efficiency when compared with Zn, Cu and Cr. It was likely due to formation of insoluble $PbSO_{4(s)}$ as precipitate or colloidal suspension. Sequential extraction of the microbially treated soil revealed that the proportion of readily extractable phases of Zn, Cu and Cr increased by bacterial leaching, and thus additional treatment or optimization of operation conditions such as leaching time were required for safe reuse of the soil. Bioleaching appeared to be a useful strategy for remediation of shooting range soil contaminated with heavy metals, and various operating conditions including concentration of sulfur input, inoculum volume of bacteria, and operation temperature exerted significant influence on bioleaching efficiency.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.409-412
• /
• 2010

This study investigated and discussed the drying characteristics of municipal wood wastes (wood, particle board, medium density fiber-board(MDF)) in the $N_2$ environment with an isothermal thermogravimetric analyzer. The drying rate could be expressed by a first order reaction model on remaining fraction of moisture. The activation energy ranged from 12.72 kJ/g mol to 18.31 kJ/g mol and the frequency factor from 0.2155 1/s to 1.249 1/s.