• Journal of Climate Change Research
• /
• v.4 no.4
• /
• pp.349-358
• /
• 2013

In this study, the newest technology available to reduce GHG emissions, which can be applicable in energy industries of the future that has large reduction obligations by energy target management and large intensity of GHG emissions, has been investigated by searching the technical characteristics of each technology. The newest technology to reduce GHG emissions in the field of power generation and energy can be mainly classified into the improvement of efficiency, CCS, and gas combined-cycle technology. In order to improve the reliability of the GHG emission factor obtained from the investigation process, it has been compared to the technology-specific GHG emission factor derived from the estimated amount of emissions. Then the GHG abatement measures, using the derived estimation of factor, by using the newest technology to reduce GHG emissions have been predicted. As a result, the GHG reduction rate by technology of CCS development has been expected to be the largest more than 30%, and the abatement rate by technology of coal gasified fuel cell and pressurized fluidized-bed thermal power generation has been showed more than 20%. If the effective introduction of the newest technology and the study of its characteristics is continued, and properly applied for future GHG emissions, it can be prospected that the national GHG reduction targets can be achieved in cost-efficient way.

• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.627-637
• /
• 2013

기후변화가 산업단지에 미치는 영향은 지자체에까지 확산될 수 있으며 물리적, 경제적인 영향이 미쳐지므로 어떠한 물리적, 경제적 변수에 의해 산업단지의 피해가 초래되는지 규명될 필요가 있다. 따라서 본 연구는 국가 산업단지를 대상으로 산업단지 및 입지 시군구의 물리적, 경제적 특성을 기반으로 한 기후변화 취약성 평가를 수행하고 산업단지 입지에 영향을 미치는 시간, 공간별 극한기후를 규명하고자 하였다. 산업단지의 극한기후에 의한 취약성은 IPCC에서 제안한 상향식 취약성 평가 방법을 따라 분석되었으며 전력요구도, 위험지역유무 등 단지의 물리적 입지조건과 입지 지자체의 기반시설 현황, 지자체와 산업단지의 경제적 특성 등이 평가 기준으로 연구되었다. 기후노출, 민감도, 적응 능력의 항목별 가중치와 항목내 변수들의 가중치 분석에 AHP가 적용되었다. 본 연구는 홍수, 가뭄, 혹서, 혹한, 해수면상승에 대해 취약 입지 시군구를 밝혔고 홍수와 가뭄, 혹서와 혹한별로 대비되는 취약성 결과가 나옴을 고찰하였다. 또한, 각 극한기후별로 적응능력 함양이 시급한 시군구를 밝혀 지자체 차원의 노력이 필요한 시군구를 규명하였다. 서울시 금천구는 산업단지 입지에 가장 취약한 지역으로 나타났으며 홍수, 혹한에서 높은 취약성을 보임이 분석되었다. 한편, 극한기후의 발생에도 불구하고 전반적으로 낮은 취약성을 보인 산업단지 입지 지자체는 광주광역시, 전라북도 익산, 제주시 등으로 분석되었다. 따라서 본 연구는 산업단지의 업종에 따라 적합하지 않은 입지 지역을 규명하였으며 향후 산업단지 입지의 잠재 기후변화 영향을 고려한 의사결정을 지원할 수 있다.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.183-198
• /
• 1997

This case study was conducted by verification the site characteristics based on the questionnaire and interview obtained from the all factories located at No. 1 developing area in Kumi industrial complex. The site characteristics were presumed from the process of location behavior and spatial linkage. Kumi industrial complex was developed to improve export industry at national levels by providing chief land price and benefiting various tax. Kumi industrial complex which enticed many factories is playing an important role in export industry in Korea. At beginning, the detention of large enterprises promoted the establishment of related small to medium sized factories into the complex. Two distinctive industries. textile and electronic, were reflected by the purpose to establish the complex and industrial characteristics of Taegu city. respectively. In Kumi industrial complex, positive responses on traffic and raw material supply and negative reactions on the environmental impact on social community as well as high labor charge were investigated. Especially the higher labor cost prevented to hire laborers effectively. In the linkages of spatial and raw material, most factories in the complex depended on the availability of out side the Kumi city. For the textile factories, the supply of raw material and parts were relied on Taegu and/or other cities, whereas in electronic factories purchased them mainly from other cities and partly from abroad. Although questionnaire and interview suggested it, most of the parts were supplied by a parts maturing companies on the complex to a few large enterprises. In the marketing linkage, textile factories revealed higher relation-ship with the foreign countries and sewing factories in Korea. On the other hand, electronic factories have strong relation-ships in the marketing linkage to the parts supplying companies in the complex or large-scale resembling companies in other cities. In the textile companies, the right for decision on purchasing raw materials and parts is belonging to the owner whereas mother enterprise usually have the right for the marketing. In the case of the electronic factories, all the purchasing activities are related to the sub-contracting companies. In the service linkage, the Quality of the service created spatial distinction. There was high linkages on inside of Kumi complex for the low grade services such as repairing and installing machines, whereas strong linkages on outside of the complex for the high grade services such as management, law, taxation, new product development. and manufacturing technology. In the linkages of activity on the R&D (research and development), electronic factories do not have sufficiently qualified institutes in the complex. Strong regional linkages in the field of textile and electronic industries revealed limitations of the local industrial complex. In the sub-contracting linkage, high linkage ship within Kumi boundary reflected the characteristics of industrial site in the complex. There, most decisions by the companies centered by the mother enterprise.

• Journal of the Economic Geographical Society of Korea
• /
• v.19 no.2
• /
• pp.209-224
• /
• 2016

The purpose of this study are to analyze the realities and characteristics of the inflow manufacturing factories located in non-urbanized area in the Capital region, and to extract the problems from locational point of view during the last 10 years. Using the raw data of factory registration statistics from 2006 to 2015, this study has intended to show the distributional characteristics of the independently-located manufacturing factories by various mapping methods. As a result, about 90% of the factories are heavily concentrated into 10 adjacent regions to Seoul and large cities. This study carried out questionaire surveys and in-depth interview to the leaders of Janganmyeon, Hwaseong-shi which have experienced the rapid increase of manufacturing factories. The independently-located factories have caused environmental pollution, destroyed rural village landscape, and affected the negative impact of the neighborhood community. The results of this study provide some implications to establish a desirable industrial location policy of non-urban areas in Capital region.

• 대한공업교육학회지
• /
• v.41 no.1
• /
• pp.68-87
• /
• 2016

This research conducted a survey for total 166 teachers of schools so as to analyze validity and satisfaction for performance objectives of SMB administration subsidy the HRDP and the CEP in Specialized High School. The results of research are as follows. First, teachers recognize that purpose of HRDP is to expand employment of specialized high school and provide human resource of SMB. And, they recognize that HRDP is important to improve school outcomes and makes a positive effect on the improvement of school outcomes. Second, teachers recognize that objectives of HRDP are improvement of student's understanding for SMB, improvement of teacher's understanding for SMB, improvement of SMB's understanding of school, cultivation of student's occupational view, systematization of career guiding program based on employment process, strengthening of industry-academia cooperation education, improvement of the level of student's skill, fulfillment of workplace experience and practice focusing workplace learning, training of customized human resource for SMB, improvement of student's adaptation to the workplace, improvement of employment rate for SMB, expansion of job opportunities for students with SMB, preparation of the base of connection between school and SMB, publicity of school, expansion of opportunities to cooperate between SMB and school, establishment of cooperative system among industrial association and school, introduction and operation of the employment connective model for joint education and employment, strengthening of field professionalism of teachers. However, satisfaction for the achievement of objectives of HRDP except for strengthening of industry-academia cooperation education and improvement of employment rate for SMB is relatively lower than the validity. Third, teachers in charge of human resource training business of middle and small sized company's specialized high school recognize that objectives of CEP are expansion of job opportunities for students with SMB, excavation of good-quality SMB, expansion of opportunities to cooperate between SMB and school, fulfillment of workplace learning, improvement of student's major foundation and in-depth skill, improvement of literacy, math, teamwork and communication abilities for students' job performance, improvement of student's working attitude and student's proper career exploration decision. However, satisfaction for achievement of objectives of CEP is relatively lower than the validity.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.3
• /
• pp.13-29
• /
• 2021

The purpose of this study was to analyze the spatial distribution and location factors of startups by generation (young and middle-aged) in Seoul. To this end, a research model was established that included factors of industry, population, and startup institutions by generation in 424 administrative districts using the Seoul Business Enterprise Survey(2018), which includes data on the age group of entrepreneurs. As an analysis method, descriptive statistics were conducted to confirm the frequency, average and standard deviation of startups by generation and major variables in the administrative districts of Seoul, and spatial distribution and characteristics of startups by generation were analyzed through global and local spatial autocorrelation analysis. In particular, the spatial distribution of startups in Seoul was confirmed in-depth by categorizing and analyzing startups by major industries. Afterwards, an appropriate spatial regression analysis model was selected through the Lagrange test, and based on this, the location factors affecting startups by generation were analyzed. The main results derived from the research results are as follows. First, there was a significant difference in the spatial distribution of young and middle-aged startups. The young people started to startups in the belt-shaped area that connects Seocho·Gangnam-Yongsan-Mapo-Gangseo, while middle-aged people were relatively active in the southeastern region represented by Seocho, Gangnam, Songpa, and Gangdong. Second, startups by generation in Seoul showed various spatial distributions according to the type of business. In the knowledge high-tech industries(ICT, professional services) in common, Seocho, Gangnam, Mapo, Guro, and Geumcheon were the centers, and the manufacturing industry was focused on existing clusters. On the other hand, in the case of the life service industry, young people were active in startups near universities and cultural centers, while middle-aged people were concentrated on new towns. Third, there was a difference in factors that influenced the startup location of each generation in Seoul. For young people, high-tech industries, universities, cultural capital, and densely populated areas were significant factors for startup, and for middle-aged people, professional service areas, low average age, and the level of concentration of start-up support institutions had a significant influence on startup. Also, these location factors had different influences for each industry. The implications suggested through the study are as follows. First, it is necessary to support systematic startups considering the characteristics of each region, industry, and generation in Seoul. As there are significant differences in startup regions and industries by generation, it is necessary to strengthen a customized startup support system that takes into account these regional and industrial characteristics. Second, in terms of research methods, a follow-up study is needed that comprehensively considers culture and finance at the large districts(Gu) level through data accumulation.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.5
• /
• pp.55-66
• /
• 2017

The purpose of this study is to examine whether the social capital supported by social enterprises play a role in ensuring self-sustaining and sustainable growth, and to examine whether the mediating effect of social capital have a central effect on social performance. The results of this study are as follows: Innovation and orientation-to-social-value of social entrepreneurship have positive effects on structural capital, and positive influence on cognitive capital and relational capital, but innovation only has no effect. In addition, social entrepreneurship is partially mediated by structural capital. In the mediating effect between social entrepreneurship and cognitive capital, only the risk-taking and the orientation-to-social-value have a partial mediation effect on cognitive capital. However, only the initiative of relational capital was found to have a full mediating effect. And social capital has a positive effect on social performance as a whole. In conclusion, considering that the realization of economic purpose and other social purpose of social enterprises will help to develop and create jobs in the local community, and that they are engaged in business activities in a poor management environment, to provide policy support for inducing high value-added industries through industry-specific collaborations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1215-1224
• /
• 2013

Great efforts have been made worldwide to reduce the Green House Gas (GHG) emission following the "Kyoto Protocol" declared during the United Nations Framework Convention on Climate Change in 1997. Many industries have restructured to meet the standard set by the Protocol. However, no clear guidance has been established for the purpose of reducing the GHG emission in construction industry. In addition, no significant effort has been made to conserve the energy during construction activities. For more effective energy saving in construction industry, it is essential to collect data about energy consumption, quantity of environmental emissions and costs. However, most studies on sustainable construction have been concentrated on the use of equipment, maintenance and repair works during construction due to the difficulties of collecting such data. This study suggests a method to select the most environmentally friendly equipment combination for earthwork with comparing environmental loads and costs using the database of Life Cycle Inventory in the Ministry of Knowledge Economy and Ministry of Environment of Korea.

• Information Systems Review
• /
• v.17 no.2
• /
• pp.29-48
• /
• 2015

This study proposes an integrated operational model of branches with customer center at stock brokerage firms and suggests ways to improve existing systems. This suggested integrated model of branches and customer centers can increase customer satisfaction and customer values for the specific services at each channel. This integrated model also enables customers to make transactions at a desired specific time, make it possible to inquire whatever the customer wished to ask, and select desired contact channels. In addition, the firms can bring in improved effectiveness of internal resources by integrating all the resources the firm has. Personal resources and system resources are distributed by the characteristics of channels that can be selected by the customers. Then agents also can provide more speedy and accurate responses to the engaged customer interactions matching to his/her job in charge. Also, the model makes it possible to collect the latest customer and transaction information at the moment of each interactions, by which the firm can provide customized services specifically tailed to each customers' preferences. However, systematic interactions between branches and customer center, and completed system should be equipped with in order to provide the highest quality services.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.229-234
• /
• 2008

XBRL is fundamentally defined as a structure that enterprises expand based on KGAAP 2.1 developed by the Korea branch of XBRL. Each enterprise selects its type of business and must check and choose the tag suitable to each enterprise. Since a complicated part such as expanding tag exists, there is a difficulty to prepare document through the step of tag expansion and data input. Although the expressive way of style provides the standards using the presentation structure and label structure provided fundamentally by XBRL, there is a complicated problem of using XBRL Processor. The electronic public disclosure system of the Financial Supervisory Service (DART) and Korea Exchange (KIND, KEDIS) use the Markup Language of SGML, XML and XBRL as format language. The procedure of defining document and process method vary in accordance with the characteristics of each language. This study analyzes the effect by step in accordance with format language of each electronic disclosure system and studies a direction of format language.