• Journal of Korean Society of Archives and Records Management
• /
• v.19 no.1
• /
• pp.69-93
• /
• 2019

Archive exhibitions are one of the important tasks of archives that promote the value of archives and contribute to increasing users' interest and positive image but have not yet been activated. Recently, there has been a shift from a one-way archive exhibition to a new way to draw attention and understanding from users by using archival contents. This study aims to propose ways to activate archive exhibitions by utilizing archival contents by analyzing the exhibits of domestic cultural heritage institutions. Focusing on ways to improve the understanding and utilization of records through archival contents, the proposed strategy for developing archive exhibition programs is a three-way contents-based exhibition, experiential exhibition, and digital environment-based exhibition. The results of this study are expected to help develop archival exhibition programs that will enhance users' interest and understanding of records.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.495-501
• /
• 2023

P-3C/K aircraft for maritime patrols that Republic of Korea Navy is using, is equipped with a variety of sensors and communication devices. Collected data from the aircraft is managed as tactical information by flight operators and stored. When the flight mission is completed, this information is transferred to tactical support center on the ground and played back or used for follow-up work through a analysis tool. During a flight mission, there are tens of thousands of detection objects within an hour in KADIZ (Korea air defense identification zone). In contrast, in TSD (tactical situation display), which displays a map when using the analysis tool, all detected objects are expressed as symbols. The increase in display symbols has a significant impact on the TSD image updating and consequently interferes with the smooth operation of operators. In this paper, we propose applying multiple threads and multiple layers to improve the performance of existing TSD. And the performance improvement is proven through the execution results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.581-589
• /
• 2021

With the recent increase in the introduction of micro-electric vehicles in Korea, interest in micro-electric vehicle user satisfaction is increasing to revitalize related markets. In this paper, a basic study was conducted on the development of public services using micro-electric vehicle based on the constituent factors of user satisfaction. The survey includes: ① 'Analytic Hierarchy Process (AHP) for selecting the priority factors of user satisfaction of micro-electric vehicles', ② 'A survey of micro-electric vehicles image' to collect data in advance for providing users' preferences and transportation services for micro-electric vehicles, ③ In order to investigate the user satisfaction level of users who actually operated micro-electric vehicles, the order of 'user satisfaction survey of micro-electric vehicle drivers' was conducted. In the Analytic Hierarchy Process (AHP) analysis, it was found that users regarded as important in the order of 'user utilization data', 'vehicle movement data', and 'charging service data'. In the micro-electric vehicle image survey, users perceived micro-electric vehicles more positively in terms of "safety", 'durability', 'Ride comfort', 'design', 'MOOE (Maintenance and other operating expense)', and 'environment-friendly' when comparing micro-electric vehicles with electric motorcycles. In the survey on the user satisfaction of micro-electric vehicle drivers, the use of micro-electric vehicle did not directly affect work performance efficiency, and there was an experience of being disadvantaged on the road due to the size of the micro-electric vehicle, and driving in a cluster of micro-electric vehicle for outdoor advertisements. The city's public relations effect was great, but it was concerned about safety. In the future, based on the results of this study, we plan to build a user satisfaction structural equation model, preemptively discover feedback R&D for micro-electric vehicle utilization services in the public field, and actively seek to discover new public mobility support services.

• Management & Information Systems Review
• /
• v.39 no.3
• /
• pp.1-16
• /
• 2020

The current tariff return system requires tax officials to calculate tax amount by themselves and pay the tax amount on their own responsibility. In other words, in principle, the duty and responsibility of reporting payment system are imposed only on the taxee who is required to calculate and pay the tax accurately. In case the tax payment system fails to fulfill the duty and responsibility, the additional tax is imposed on the taxee by collecting the tax shortfall and imposing the tax deduction on For this reason, item classifications, together with tariff assessments, are the most difficult and could pose a significant risk to entities if they are misclassified. For this reason, import reports are consigned to customs officials, who are customs experts, while paying a substantial fee. The purpose of this study is to classify HS items to be reported upon import declaration and to indicate HS codes to be recorded on import declaration. HS items were classified using the attached image in the case of item classification based on the case of the classification of items by the Korea Customs Service for classification of HS items. For image classification, CNN was used as a deep learning algorithm commonly used for image recognition and Vgg16, Vgg19, ResNet50 and Inception-V3 models were used among CNN models. To improve classification accuracy, two datasets were created. Dataset1 selected five types with the most HS code images, and Dataset2 was tested by dividing them into five types with 87 Chapter, the most among HS code 2 units. The classification accuracy was highest when HS item classification was performed by learning with dual database2, the corresponding model was Inception-V3, and the ResNet50 had the lowest classification accuracy. The study identified the possibility of HS item classification based on the first item image registered in the item classification determination case, and the second point of this study is that HS item classification, which has not been attempted before, was attempted through the CNN model.

• Journal of Digital Convergence
• /
• v.14 no.3
• /
• pp.287-297
• /
• 2016

This research paper is of a 'mixed method' research design: the quantitative analysis covering general data and the current condition of male nurses, the qualitative analysis being used on interview transcript data. The research subjects are 19 male nurses who work at a hospital and 29 female nurses who are doing Masters degrees in "J" province of the Republic of Korea. The data collection period was March 25 to April 1, 2015. The quantitative data was analyzed with SPSS WIN 19.0 software while the qualitative data was analyzed according to the 'contents analysis' method. The results show that the satisfaction of male participants in their profession is higher than average. The item 'growth as a professional' was rated highest as a satisfying aspect of working as a nurse. A difference was observed in the points of view of male and female participants, however, both male and female nurses have a positive view of male nurses which over comes traditional stereotypes. These results will be used to establish a positive image of nurses across genders.

• Land and Housing Review
• /
• v.14 no.2
• /
• pp.125-135
• /
• 2023

Drones are used in various fields, including land survey, transportation, forestry/agriculture, marine, environment, disaster prevention, water resources, cultural assets, and construction, as their industrial importance and market size have increased. In this study, image data for deep learning was collected using a mavic3 drone capturing images at a shooting altitude was 20 m with ×7 magnification. Swin Transformer and UperNet were employed as the backbone and architecture of the deep learning model. About 800 sheets of labeled data were augmented to increase the amount of data. The learning process encompassed three rounds. The Cross-Entropy loss function was used in the first and second learning; the Tversky loss function was used in the third learning. In the future, when the crack detection model is advanced through convergence with the Internet of Things (IoT) through additional research, it will be possible to detect patching or potholes. In addition, it is expected that real-time detection tasks of drones can quickly secure the detection of pavement maintenance sections.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.1
• /
• pp.114-122
• /
• 1999

The development of EDI is playing a very great role in strengthening corporate competitiveness in the foreign market in addition to the expansion of the size of trade volumes between nations and the solution of the problem or streamlining procedures for trade as well as the smooth processing of trade business and cost and time savings effects. At point in time that corporate credibility and national image in Korea have greatly fallen in the IMF-supported regime, Korea is making every effort to restore its national credibility through the expansion of exports and focusing on the increase of exports through EDI for trade as part of this. Therefore. this study was intended to probe the EDI promotion strategy of the exporting firm with the development of EDI As a result, the following conslusion was drawn : (1) Development of the EDI system to provide immediate options. (2) Making the staff information - minded at a company-wide level. (3) Development of the website as the tool of the marketing strategy. (4) Construction of the Cyber Shopping Mall.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.1
• /
• pp.9-18
• /
• 2012

The BIM called information modeling is used by tool not only it will simply be appearing the image and can save the information. Recently, there is a lot of case that improves the construction productivity by using the BIM during the life cycle of bridge from order to management. Although we already recognize the advantage of BIM, it is a careful phase to use the BIM. Therefore, We made the BIM for bridge, evaluated the possibility that can build the object used in the civil engineer, studied about the utility, the improvement in order to use the BIM properly. As a result, the BIM can recycle the information by using parametric model and attribute the efficiency and accuracy on drawing and calculating the quantity. The BIM is able to help productivity increase by using the builded model after we spend the effort building a model in early stage.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.4
• /
• pp.433-439
• /
• 2015

The aim of this study is to suggest basic data about efficient motivation plans for improving the image of the design and Construction Management (CM) field and enhancing professional consciousness of employees. The major findings and conclusions of this study are as follows. First, the employees in design firms had a relatively high level of dissatisfaction with the 'Reduction of work hours', and those in CM companies had a relatively high level of dissatisfaction with the 'Fringe benefit conditions'. Second, when the effects of the items of job satisfaction on overall job satisfaction were analyzed through factor analysis, job performance satisfaction had the biggest effect on the employees in design firms, and intrinsic reward and opportunity satisfaction had the biggest effect on those in CM companies.

• Proceedings of the Technology Innovation Conference
• /
• 2004.06a
• /
• pp.170-213
• /
• 2004

생산자 중심에서 소비자 중심으로의 경영 패러다임이 변화함에 따라, 이제 디자인 경영(design management)의 시대가 도래하였다 즉, 제반 기능의 활동이 독립적이고 순차적으로 이루어지는 기존 경영방식(즉, 제품 개발 $\rightarrow$ 제품 디자인 $\rightarrow$ 제조 $\rightarrow$ 마케팅 $\rightarrow$ 판매)과는 달리, 디자인 경영은 디자인을 중심으로 제반 기능간의 통합과 조정을 이룬다. 이 결과, 디자인 경영은 조직간의 커뮤니케이션을 활성화시키며 소비자의 추상적인 욕구가 구체적으로 상품에 표현되도록 노력한다. 이렇게 함으로써, 디자인 경영은 기업 이미지 창조의 역할을 적극적으로 수행하는 것이다. 이와 같은 소비자 중심의 경영은 과거 제품의 판매(sales)지향적이던 기업 활동을 소비자와의 관계(relationship)지향적으로 변화시키고 있다. 본 연구의 분석 목적은 제품 디자인을 품질경쟁력의 결정요인으로서 포함시켜 품질경쟁력의 평가모형을 개발하고 품질경쟁력의 결정요인 및 상관관계와 품질함수를 추정함으로써 제품 디자인 및 디자인 경영의 기능적 역할을 규명하고 디자인 경쟁력 수준을 평가 및 측정할 수 있는 모형을 정립함과 동시에 이를 제고할 수 있는 정책방향을 제시하는 것이다. 이로써, 본 연구는 신상품의 개발과정에서 어떻게 제품 디자인이 연구개발, 제조, 마아케팅, 판매 등의 제반 기능들과 상호 작용하며 이들 기능들의 통합과 조정을 추구할 수 있는가를 보여주는 디자인 경영의 이론적 기초를 제공하고자 함이다. 상기와 같은 연구목적과 분석목표를 위하여, 한국 제조업 부문의 400개 표본기업에 대하여 소정의 설문조사를 통하여 추출된 측정변수들을 기초로 품질경쟁력의 결정요인을 분석하고 품질경쟁력 지수를 도출하여 산업부문별 및 제품유형별로 비교하였으며, 품질함수를 추정하였다. 전술한 분석결과를 토대로, 디자인 경영이론의 기초를 제공하기 위한 시도로서 제품 디자인의 파급효과와 인과관계에 대한 가설검정을 실시하였다. 본 연구의 분석 결과는 다음과 같이 요약될 수 있다. (1) 품질경쟁력의 결정요인으로서 주요 제품들의 기능성, 기본 성능, 제품성과의 기술적 성취도, 제품 수명(내구성), 신뢰성, 핵심 기술력, 사용 편의성, 서비스 편의성, 생산 용이성, 제품 디자인의 우수한 정도가 a=0.01 수준 하에서 유의적으로 추정되었다. 이들 변수들 중에서 품질경쟁력에 가장 큰 영향을 미치는 측정변수는 제품의 기본 성능, 수명(내구성), 신뢰성, 제품 디자인의 순서로 추정되었다. 이것은 한국 제조업이 아직 산업 디자인이 품질경쟁력에 크게 영향을 미치는 성숙단계에 이르지 못하였음을 의미한다. (2) 제품 디자인에게 영향을 끼치는 유의적인 변수는 연구개발력, 연구개발투자 수준, 혁신활동 수준(5S, TPM, 6Sigma 운동, QC 등)이며, 제품 디자인은 우선 품질경쟁력을 높여 간접적으로 고객만족과 고객 충성을 유발하는 것으로 추정되었다. 상기의 분석결과로부터, 본 연구는 다음과 같은 정책적 함의를 도출하였다. 첫째, 신상품 개발과 혁신을 위한 포괄적인 연구개발 프로젝트를 품질 경쟁력의 주요 결정요인(제품의 기본성능, 신뢰성, 수명(내구성) 및 제품 디자인)과 연계하여 추진해야 할 것이다. 둘째, 기업은 디자인 경영 마인드 제고와 디자인 전문인력 양성을, 대학은 디자인 현장 업무를 통하여 창의력 증진과 기획 및 마케팅 능력 교육을, 정부는 디자인 기술개발 및 디자인 교육지원의 강화를 통하여 각각 디자인 경쟁력$\rightarrow$품질경쟁력을 제고시켜야 할 것이다.