• 수산해양기술연구
• /
• 제13권2호
• /
• pp.21-26
• /
• 1977

대서양(大西洋) Africa 연안어장(沿岸漁場)에서 조업중(操業中)인 태창수산(太倉水産) 소속(所屬) Stern trawl 선(船) No. 85 PARTO(499S)에서 사용(使用)하고 있는 PT-4 형(型) 어구(漁具)의 조정한계(調整限界) 및 적정(適正)한 예망속도(曳網速度)와 주기(主機)의 운전상태(運轉狀態)를 판단(判斷)하기 위(爲)하여 warp에 작용(作用)하는 장력(張力)을 측정(測定)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 어구조정(漁具調整)의 한계(限界)는 warp에 작용(作用)하는 장력(張力)의 크기가 약(約) 7,500kg, 강약(强弱)의 범위(範圍)가 약(約) 1,000kg을 초과(超過)하지 않는 것이 효과적으로 판단(判斷)했다. 2. 예망속도(曳網速度)는 주기(主機)의 효과적인 운전상태(運轉狀態)와 어획성능(漁獲性能)을 고려(考慮)하여 $3.6{\sim}4.0$ knot로 판단(判斷)했다. 3. 주기(主機)의 운전상태(運轉狀態)는 유량소모(油量消耗)가 급증(急增)하는 r. p. m. 290, propeller pitch 각도(角度) 13.8를 초과(超過)하지 아니하고 $13.5^{\circ}{\sim}13.8^{\circ}$를 사용(使用)하는 것이 효과적으로 판단(判斷)했다.

• 수산해양기술연구
• /
• 제46권3호
• /
• pp.195-203
• /
• 2010

Recently, Fishermen have required to expand the circumference of trap entrance for conger eel because it was difficult to take the catch out as well as to put the baits into. A series of fishing experiments was carried out in coastal areas of Tongyoung, Korea in 2008 and 2009 using the traps to describe the effect of the entrance size on the catch. The experimental traps (five types) were used in filed experiments with four types circumference size traps (140, 180, 220 and 260mm) with mesh size 22mm and another type was used the same one usually using in filed with mesh size 35mm (750mm circumference). The experiment results were, the conger eels of total length 35mm more or so were caught 85, 93, 142 and 176 individual by the experiment traps with mesh size 22mm as increase circumference size from 140mm to 260mm, respectively. And the small conger eels of the total length below 35mm to be prohibited to catch by law were caught 145, 160, 288 and 304 individual according to increase the circumference size of trap, respectively. In addition, in case of the trap with mesh size 22mm, bycatches were 230 - 260 individuals and much more than bycatches of the trap with mesh size 35mm. In conclusion, when we expand the circumference size of trap according to fishermen's requirement, we should review not only economic of fishery but also increasement the bycatch of non-target fishes and small size fishes.

• 수산해양기술연구
• /
• 제43권1호
• /
• pp.28-37
• /
• 2007

In order to develop the biodegradable monofilament gill net for the protection of marine ecosystem and reduction of ghost fishing, enpol monofilament gill net was made for Chionoecetes opilio using polybutylene succinate as a biodegradable chip. Catching efficiency on 2 type monofilament gill net, PA and Enpol, were carried out using 2 commercial fishing boats around the fishing ground of Wang-dol rock from January 2004 to May 2006. Enpol monofilament gill net spun polybutylene succinate as a biodegradable chip was appeared high practicality for Chionoecetes opilio gill net. Target fishing ratio were 98% and 98.3% for the PA and enpol monfilament gill net, respectively. In addition, CPUE ratio of female and male(CL < 90mm) to Chionoecetes opilio caught in the enpol gill net were 25.3-40.3%, 14.0-22.1% less than PA gill net, respectively. However, CPUE ratio of male(CL > 90mm) to Chionoecetes opilio caught in the enpol gill net were 2.5-11.3% more than PA gill net. There was no difference in CPUE of female and male to Chionoecetes opilio caught using 2 gill nets as a result of the significance level of 5% by T-test.

• 수산해양기술연구
• /
• 제50권3호
• /
• pp.326-333
• /
• 2014

This study was conducted to investigate the fishing efficiency of an improved LED fishing lamp for squids. A total of 31 fishing operations were carried out with six-crew commercial fishing vessel Haengbok-Ho (24 tons) on which 43.2kW LED was installed, along with 14 automatic jigging machines, from October 6 to November 16, 2012. The 19 fishing vessels with Haengbok-Ho were compared with a control subject was 24 tons or 29 tons. A total illuminating power of metal halide (MH) fishing lamps in the control fishing vessel was either 84kW or 120kW. The number of automatic jigging machines in the control vessels was 8-18 and the number of crews engaged for fishing operation was 3-13. Average fuel consumption of LED fishing vessels during fishing operation was 505.1l which led to an average fuel consumption of 42.7l per hour. LED fishing vessel and MH fishing vessel caught on an average 1,946 squids and 2,439 squids, respectively, during the study period. Crews (hand line and hand reel) caught about 2.2 times the automatic jigging machines for LED fishing vessel and about 2.1 times for MH fishing vessel. Meanwhile, catches by the fishing vessels with LED in the combined total number per one line of automatic jigging machine and per crew were 86.6% of that of the control fishing vessel with MH. Also, fishing vessels with LED per automatic jigging machine achieved 71.8% of catches of that with MH fishing lamp. The catches of squids per the fishing vessel with 1W LED fishing lamp were higher by more than 135.5% of that in the fishing vessel with MH, which showed a good fishing performance even with only the use of a LED fishing lamp.

• 수산해양기술연구
• /
• 제50권3호
• /
• pp.396-406
• /
• 2014

Shrimp beam trawl fishery is one of the important coastal fisheries in Korea. It has a regulation to the length of beam (8m) and wing net (7m) of shrimp beam trawl that has been used in the district of Junlanam-do and Gyungsangnam-do. This regulation was made in relation to the size of shrimp beam trawler of 3-ton class at that time. Now the shrimp beam fishing vessel has a limit not greater than 5 tons in gross ton. Recently, with improvement of fishing industry and fishing vessel fishermen asked the expansion of the length of beam and wing net, therefore it is necessary to investigate the effect of lengthening the beam and wing net length. Three different beams (8m, 10m and 12m in length) and three different wing net (7m, 10m and 13m in length) were made and the experiment was conducted near Narodo of Goheng by two fishing vessels of 4.98 and 4.88 tons in gross ton between June 2011 and October 2012. When the length of wing net was increased from 7m to 10m and 13m, the relative catch ratio in total biomass was increased 25% and 79% for shrimp, (17% and 22% in total), respectively. And when the beam length was increased from 8m to 10m and 12m, the relative catch ratio was increased 35% and 84% for shrimp, (21% and 37% in total), respectively. The force exerted to the iron guide of inhauler's with the beam length of 8m was about 30% greater than that with the beam length of 10m when hauling the shrimp beam trawl net.

• 수산해양기술연구
• /
• 제54권4호
• /
• pp.279-286
• /
• 2018

The objective of this study was to quantitatively evaluate the influence of the netting hanging ratio on fishing performance of gillnet. A total of six tests was carried out using three kinds of gillnets with different horizontal hanging ratios (0.3, 0.5 and 0.7) on the basis commercial gillnet of mesh size of 60 mm used in Yeosu Dolsan. As a result of the test fishing operation, catches of the net with hanging ratio 0.3 and the shortest float length was 1.34 times larger than the net with hanging ratio 0.7. The caught species in experimental testes was lager in the net with hanging ratio 0.3 than the net with hanging ratio 0.7. The catch rate per unit area (CPUE) is on the silver croaker with the largest catches in tests as follows. The net with hanging ratio 0.3 net was $89.45g/m^2$, hanging ratio 0.5 net was $41.63g/m^2$, and hanging ratio 0.7 net was $24.50g/m^2$. The net with hanging ratio 0.3 (float line length of 45 m) exhibited the largest CPUE value.

• 한국수산과학회지
• /
• 제54권6호
• /
• pp.1030-1035
• /
• 2021

Diving fishermen are demanding permission to use an inspirator that can efficiently catch Manila clam; however, coastal fishermenargue that the use of inspirator devastates the seabed and depletes fishery resources. Therefore, the aim of this study was to evaluate the fishing power of diving gears and its effect on coastal fishing grounds. The average time taken to fish in the seabed (4 m²) with a rake, water gun, and an inspirator was 11.17 min, 13.33 min and 7.81 min, respectivelyThe values of catch per unit time with a rake, water gun, and an inspirator were 3.35 kg/min, 2.26 kg/min, and 3.83 kg/min, respectively. Suspended sediments were observed the most in the water gun fishing area, and were observed more in April when fishing was not carried out than in February when fishing was carried out. However, the difference in the amount of sediment deposited in the fishing area using the three-fishing gears was very small. For an accurate analysis of the impact of the fishing gears on the seabed, supplementary tests such as grain size analysis and changes in benthic organisms need to be conducted.

• 수산해양기술연구
• /
• 제27권4호
• /
• pp.266-277
• /
• 1991

분사류의 해저 굴삭성능을 이용하여 해저의 모래속에 서식하고 있는 개량조개, Mactra chinensis(PHILIPPI)를 어획하기 위해, 전보의 분사노즐의 모래면 굴삭성능에 관한 수조실험 결과를 근거로 분사식 항망 시험어구를 제작하고, 군산 앞바다의 개량조개 어장에서 1990년 10월 5일에서 10월 30일까지 현장실험을 실시한 결과는 다음과 같다. 1) 시험어구의 굴삭깊이는 분사속도 1200cm/s일 때 10~11cm, 1350cm/s일 때 11~13cm, 1500cm/s일 때 13~14cm 이상이었다. 2) 예망장력은 예망속도 6.7cm/s에서 105$\pm$5kg으로 매우 작았다. 3) 단위소해면적당 평균어획량은 0.42kg/m 상(2)으로 재래식 형망에 비해 1.2~1.6배로 많았다. 4) 분사식 항망시험 어구는 조개를 파손시키지 않아 어획물에 파손패가 거의 없었다. 5) 분사류에 의한 어장의 탁도 변화량은 수심, 유속, 저질등에 따라 다소 다르나, 표층에서는 수심 5.2m이상이면 변화량을 볼 수 없고, 해저면상 3m의 저층에서는 어구의 후방 1m에서 9~11ppm으로 최대치를 보였으나, 점차 감소되어 9m 후방 이후에서는 변화량이 거의 없었다.

• 해양환경안전학회지
• /
• 제30권4호
• /
• pp.348-357
• /
• 2024

상선에 비해 잦은 변침을 하고 어획물로 인한 중량 및 무게중심의 변화와 같은 다양한 운항조건을 가진 어선의 경우, 조종성능은 선박 운항 시에 매우 중요한 역할을 한다. 소형 어선의 사고는 2022년 기준 전체 해상 사고의 약 60%를 차지하며, 이는 부족한 조종성능으로 인한 충돌과 좌초 사고가 주요 원인이다. 특히 10톤 미만의 소형선박에서 발생한 사고는 전체 사고의 약 65%를 차지하는데, 소형 어선의 조종성능 관련 기준이 부재하여 이를 정확히 평가하기엔 어려움이 있다. 이에 본 연구에서는 4.99톤급 소형 어선을 대상선으로 선정하여 3D-CAD로 모델링 한 후, 상용 수치해석 프로그램인 STAR-CCM+를 활용하여 선박의 조종운동 시뮬레이션 환경을 구축하였다. 이를 바탕으로 다양한 표준재화상태와 무게중심을 고려하여 10° / 10° 및 20° / 20° zigzag test와 35° turning test를 수행하였고, 선체 중량이 증가함에 따라 변침성능이 감소하고 선회성능이 향상되는 경향을 분석하였다. 그 중, 만재출항과 부분만재입항 상태에서는 상대적으로 선회성능이 부족한 결과를 확인하였다. 이를 바탕으로 소형선박의 안전한 운항을 위한 표준재화상태와 무게중심을 고려한 조종성능의 평가 및 그에 상응하는 표준화된 조종성능 평가 기준의 필요성을 제시하였다. 또한, 본 연구의 조종성능 평가 결과가 소형선박의 조종성능 평가 기준 선정을 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• 한국해안·해양공학회논문집
• /
• 제30권3호
• /
• pp.95-102
• /
• 2018

고속 주행시 마찰저항을 감소시키기 위해 선체의 선저부분의 모양을 변화시키는 등 최근 관련 분야의 개발이 이루어지고 있는 바, 본 개발에서는 기하학적으로 고속활주선의 스텝 단면을 유선형(streamlined type) 구조로 제작해 침수 표면적에 의한 마찰저항의 최소화를 목적으로 준비하였다, 본 개발의 목적은 어업의 각종 위급상황 및 안전성을 고려한 고속활주선의 구조설계를 기반으로 하여 어업의 특수성 및 작업특성(어군 추적 및 어획물 출하)을 고려한 최적선형으로서 유선형 마찰저감형 고속활주선을 제작하는데 그 목표가 있으며, 이 과정에서 제작된 성과물에 대한 성능평가를 수행하여 정량적 목표치를 확보하고자 함에 본 기술개발 논문의 소개 배경이 있다.