• Convergence Security Journal
• /
• v.17 no.2
• /
• pp.15-22
• /
• 2017

This paper presents new 8-bit implementation of AES. Most typical 8-bit AES designs are to reduce the circuit area by sacrificing its throughput. The presented AES architecture employs two separated S-box to perform round operation and key generation in parallel. From the simulation results of the proposed AES-128, the maximum critical path delay is 13.0ns. It can be operated in 77MHz and the throughput is 15.2 Mbps. Consequently, the throughput of the proposed AES has 1.54 times higher throughput than the other counterpart although the area increasement is limited in 1.17 times. The proposed AES design enables very low-area design without sacrificing its performance. Thereby, it can be suitable for the various IoT applications that need high speed communication.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.1
• /
• pp.19-24
• /
• 2018

This paper presents an IoT platform of common interfaces that are flexible IoT applications and Connect the smart devices. The IoT platform includes automatic collaboration discovery the smart Device. It is different things case with connection each device through IoT Platforms are each device and application service. Due to these heterogeneities, it is quite advantages to develop applications working with derived IoT services. This circumstance needs the generic interface and results in a range of IoT architectures by not only the environments settings and discovery resource but also varied uniqe to implementation services working with IoT applications. Therefore, this suggestion of solve the problems and make it possible independent platforms always alive to connection with each devices based on the generic interface. The generic interface is heterogeneity-driven solve the problems and effectively contributions a platform that could be operated in diverse IoT Platforms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.293-297
• /
• 2009

This paper describes a real-time reliable measurement and analysis system for ubiquitous healthcare based on IEEE802.15.4 standard. In order to obtain and monitor physiological body signals continuously, wearable pulse oximeter is designed in wrist that could used to measure oxygen saturation of a patient unobtrusively. The measured data was transferred to a central PC or server by using wireless sensor nodes via a wireless sensor network for storage and analysis purposes. LabVIEW server program was designed to monitor and process the measured photoplethysmogram(PPG) to accelerated plethysmogram(APG) by appling second order derivatives in server PC. These experimental results demonstrate that APG can precisely describe the features of an individual's PPG and be used as estimation of vascular elasticity for blood circulation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.221-228
• /
• 2018

The purpose of this study is to design and implement a maritime telemedicine system to provide the best medical service for patients who rescue and happens in sailing ship. For this purpose, INMARSAT and MVAST, which are necessary communication channels for maritime telemedicine, were examined and diversity in maritime communication path was suggested. It was implemented to enable maritime telemedicine by linking smart devices and medical devices for physical examination. The marine telemedicine system adopts the HTTP communication protocol to configure the web server and process the client request. The patient's chart information was entered using an application for AndroidPad and the patient was diagnosed using Bluetooth electronic stethoscope for diagnosis. This system enables appropriate medical treatment to emergency patients at maritime, which ultimately can improve medical services. It is expected to be a more effective medical support system through linkage with various medical equipment.

• Journal of Digital Convergence
• /
• v.20 no.2
• /
• pp.63-75
• /
• 2022

In this study, the smart docent interface provided at 25 exhibition halls at domestic and foreign were compared and analyzed based on affordance. Heuristic evaluation techniques were adopted, centered on a small number of experienced people, and six research participants were selected based on Jacob Nielsen's guidelines that five to eight people per set of research can achieve sufficient results. As a result of comparative analysis of affordance, smart docent used in the Oriental showed a higher average value than smart docent used in the Western, but a lower value for sensory affordance alone. In addition, the categories were subdivided to derive the affordance values for each country, and a singularity was found that the sensory affordance of smart docents used in the United States represents the highest value compared to other countries. In conclusion, this study was able to compare the four affordances of smart docents used in domestic and foreign exhibition halls while presenting directions for future behavioral improvement, which could provide practical implication for smart docent interface design and exhibition hall service strategies.

• Journal of Broadcast Engineering
• /
• v.17 no.4
• /
• pp.584-595
• /
• 2012

Recently, 3D stereoscopic video and HTTP adaptive streaming technologies have received a lot of attention from relevant industrial fields and markets in terms of multimedia contents and delivery services, respectively. It is expected that promising and marketable service models can be created by means of these noticeable two technologies. However, current standard specifications do not provide a method for organized connection between those two technologies. 3D stereoscopic video services are weighted in broadcasting and storage services that are only available under environments in which the network bandwidth is guaranteed or free. Also, HTTP adaptive streaming technologies only provide plain 3D service methods that are dependent on particular Codec. Therefore, this paper proposes 3D video delivery format for HTTP adaptive streaming service which enables stable and seamless display for various stereoscopic video sequences over internet networks. The proposed technology is designed on the basis of Stereoscopic Video Application Format which is a service-oriented standard specification for storing stereoscopic video sequences. Also, this delivery format is directly applicable over DASH that is the representative standard technology for HTTP adaptive streaming services. The delivery format proposed in this paper has been submitted to MPEG and it has been accepted as a working draft, thus it expected to pave the way for practical industrialization in relevant fields from now on.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.3
• /
• pp.59-71
• /
• 2020

This study is empirically intended to look into the effects of smart factory technologies on quality and innovation performance in small and medium-sized Enterprises(SMEs). The research results are as follows. Device and application technologies for smart factory had a positive effect on the information quality and system quality, while platform technologies had an insignificant effect on the information quality and system quality, rejecting the effect of platform technologies for smart factory on information quality and system quality. Device technologies for smart factory had also a significant effect on innovative performance, while platform and application technologies had an insignificant effect on innovative performance, rejecting the effect of platform and application technologies for smart factory on innovative performance. The system quality had a significant effect on innovative performance, while the information quality had an insignificant effect on innovative performance. The quality played a partial mediating role in the effect of device technologies for smart factory on innovative performance. These results indicate that small and medium-sized venture firms should implement a high standard of information quality management(IQM) through interconnection as the kernel of a smart factory in the 4th revolutionary era, and that they can improve their corporate performance through the interlocking between components from manufacturing design to execution and analysis and the integrated management of systematic information collected from devices if necessary.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.239-261
• /
• 2001

A large suite of official statistical data sets has been compiled for geographical units under the national directives, and it is the quantitative regional analysis procedures that could add values to them. This paper reports our attempts at prototyping a statistical GIS which is capable of serving over the Web a variety of regional analysis routines as well as value-added statistics and maps. A pilot database of some major statistical data was ingested for the city of Seoul. The baseline subset of regional analysis methods of practical usage was selected and accommodated into the business logic of the target system, which ranges from descriptive statistics, regional structure/inequality measures, spatial ANOVA, spatial (auto) correlation to regression and residual analysis. The leading-edge information technologies including the application server were adopted in the system design and implementation so that the database, analysis modules and analytic mapping components may cooperate seamlessly behind the Web front-end. The prototyped system supports tables, maps, and files of downloadable format for input and output of the analyses. One of the most salient features of out proposed system is that both the database and analysis modules are extensible via the bi-directional interface for end users; The system provides users with operators and parsers for algebraic formulae such that the stored statistical variables may be transformed and combined into the newly-derived set of variables. This functionality eventually leads to on-the-fly fabrication of user-defined regional analysis algorithms. The stored dataset may also be temporarily augmented by user-uploaded dataset; The extension of this form, in essence, results in a virtual database which awaits for users commands as usual. An initial evaluation of the proposed system confirms that the issues involving the usage and dissemination of information can be addressed with success.

• Informatization Policy
• /
• v.21 no.2
• /
• pp.67-88
• /
• 2014

The research hypothesis of this paper is that education for smart device utilization has a positive effect on ability and utilization of smart devices for the disabled. The data for disabled of NIA's 2012 survey about digital divide is used, and the research method is "Heckman's 2-stage method" which considers the problem of selection bias. As a research result, this paper says that the disabled who had experience of education for smart device utilization have higher level of ability and utilization of smart devices. Also, a high level of education and family income, professional career and young generation have been very positive effect on the high level of ability and utilization of the disabled. The level of ability and utilization of the blind tend to be lower than those of the physically disabled. These results remind that the education for smart device utilization for the disabled is important and effective. And various contents and methods of education which are appropriate for the disability types should be developed.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.8
• /
• pp.269-280
• /
• 2022

With the rise of a decentralized finance market (so called, DeFi) using blockchain technology, users and capital liquidity of decentralized finance applications are increasing significantly. The Automated Market Maker (AMM) is a protocol that automatically calculates the asset price based on the liquidity of the decentralized trading platform, and is currently most commonly used in the decentralized exchanges (DEX), since it can proceed the transactions by utilizing the liquidity pool of the trading platform even if the buyers and sellers do not exist at the same time. However, Automated Market Maker have some disadvantages since the cost efficiency of each transaction using Automated Market Maker depends on the liquidity size of some liquidity pools used for the transaction, so the smaller the size of the liquidity pool and the larger the transaction size, the smaller the cost efficiency of the trade. To solve this problem, some platforms are adopting Transaction Path Routing Algorithm that bypasses transaction path to other liquidity pools that have relatively large size to improve cost efficiency, but this algorithm can be further improved because it uses only a single transaction path to proceed each transaction. In addition to just bypassing transaction path, in this paper we proposed a Multi-Path Routing Algorithm that uses multiple transaction paths simultaneously by distributing transaction size, and showed that the cost efficiency of transactions can be further improved in the Automated Market Maker-based trading environment.