• Title/Summary/Keyword: 어선원

Search Result 143, Processing Time 0.02 seconds

Stabilization of ship's heading in AIS of fishing vessel by a hybrid GPS/EM compass (어선 AIS에서의 하이브리드 GPS/EM 컴퍼스에 의한 선수방위 안정화)

  • Lee, Yoo-Won;Jo, Hyeon-Jeong;Lee, Dae-Jae
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.46 no.1
    • /
    • pp.50-55
    • /
    • 2010
  • The ship's heading information of hybrid GPS/EM compass were applied to the AIS of fishing vessel and examined the possibility of accuracy improvement. It is observed 453 each in AIS receiver of land among 3,982 each in AIS Rx/Tx transponder of the test ship at sea, and transmission interval according to the speed of ship is determined the 11.4% good transmitting data of the all information. In results, maximum compass error for the ship's heading of an EM compass was $19.1^{\circ}$. The variance of ship's heading owing to the speed of ship is surveyed. The COG (Course Over Ground) was changed extremely in $180^{\circ}W-179^{\circ}E$ range under 4.9knots, and in $24^{\circ}W-23^{\circ}E$ range over 4.9knots. Finally, using the ship's heading of EM compass and the COG from GPS for the autopilot system of a small fishing boat and the ship's heading information of AIS results in danger on the own ship's navigation safety and leads to make confusion both the others and VTS (Vessel Traffic Service) center. Therefore, the hybrid GPS/EM compass is identified as the best system for a small fishing boat and is allowed to offer continuously a ship's heading information with high accuracy and stability.

Analysis on Curriculum of Fisheries Universities for Fishing Vessel Officer (수산계 대학 어선항해사 지정교육기관 교과편성 분석)

  • Kim, Hyung-Seok;Kang, II-Kwon;Kim, Wook-Sung;Lee, Yoo-Won;Kim, Seok-Jae;Ryu, Kyung-Jin
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.26 no.5
    • /
    • pp.1129-1137
    • /
    • 2014
  • This research analyzes whether the curricula of the designated educational institutions which cultivate fishing vessel officers are properly coordinated to fulfill the requirements of an international convention and the designated compulsory courses. It also compares these with the educational curriculum published by the designated educational institutions in 2013 with the STCW-F Convention and IMO Model Course. The outcome of this research shows the curricula operated by the designated institutions fulfills the standard of The Ministry of Maritime Affairs and Fisheries. However, some of them do not meet the requirements of the STCW-F Convention and IMO Model Course. The compulsory coursework for marine technicians comprise 21 to 34 credits, compared to the 64 compulsory credits approved by maritime university. For the last five years (2008-2012), 555 out of 833 graduates have earned marine technician licenses, which accounts for 62% of the total. In preparation for ratifying the STCW-F Convention and in accordance with IMO Model Course and the minimum requirements of STCW-F Convention in the near future, improvements to the curricula are recommended.

A Study on the Development of Collision Avoidance System for Small-Sized Vessel Using WAVE Communication Technology (WAVE 통신기반 소형 선박 충돌회피 보조시스템 개발)

  • KIM, Mong-Ju;OH, Joo-Seok;NAM, Yong-Yun
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.26 no.1
    • /
    • pp.8-14
    • /
    • 2020
  • According to the statistics provided by Korean Maritime Safety Tribunal for the year 2018, the majority of marine accidents in the past four years have occurred in fishing boats and small-sized boats. Negligent behavior resulting from not looking outside and non-compliance with navigation laws are the primary reasons behind ship collisions. Although safety education and training are reinforced to prevent such accidents, they still occur frequently. Hence, technical methods are continuously being developed to reduce ship collisions caused by human cause. The objective of this study is to reduce ship collisions by employing the WAVE communication system, which has short transmitting and receiving periods that can be incorporated for high-speed small-sized vessels. In this study, the suitability of the communication range was examined, and the appropriate range and timing for avoidance motion were accordingly selected, and a control algorithm based on the same was thereby designed. Consequently normal operation of the collision avoidance system was verified by connecting and simulating the proposed WAVE communication router-controller-steering equipment.

Fishing Management Using Automatic Fishing Information Recording System of Fishing Vessel (어선조업정보 자동기록장비를 이용한 어업관리)

  • LIM Dong-Kyu;SHIN Hyeong-Il;LEE Dae-Jae;KIM Hyung-suk;KIM Seok-Jae;LEE Yoo-Won
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.38 no.1
    • /
    • pp.70-77
    • /
    • 2005
  • This paper studied the feasibility for utilization of the automatic fishing information recording system, which stores and manages navigational information and fish catch results of a fishing vessel in a portable storing device, in order to help promote the systematic management of fishing information by offshore and coastal fishing vessels. Position accuracy was within 10 meters on the position accuracy experiment using GPS module. Characteristics of navigation according to the navigation, anchoring and fishing operation showed the difference of navigation track information for GPS, and fishing possibility of fishing boat could be estimated through the analysis as the utilization result of system for the large pair trawl and large purse seiners. In particular, it is impossible to provide false positional information by arbitrarily operating the system, and it may be possible to present the factual results of fish catch by date, fishing ground, and fish species by comparing the fishing information with fish catch. Such contents are considered to be useful as basic data for the management of fisheries resources.

Mechanization of Fishing Operation on the Sea Eel Pots (장어통발 어업의 자동기계화에 관한 연구)

  • Ha, Jeong-Sik;Kim, Yong-Hae;Jang, Chung-Sik
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.26 no.1
    • /
    • pp.45-50
    • /
    • 1990
  • The basic investigation of the sea eel pots fisheries by questionnarie observation and dimension of the pots by fishing operation were carried out in order to develop for mechanical hauling system with 20~50 gross tonnage fishing boats from June to December, 1988. Number and weight of fish per pot between smaller diameter 11cm and larger 13cm of the pot have no significance so that the drag of the smaller pots can be decreased about 20% than the larger pots. The operating time by two men from opening to closing with screwing lock entrance was slightly faster than that by three men with knotting entrance even though the losses with two kinds of entrances while fishing operation were about the same. It was very reasonable that stone and lead sinker on the main line were substitute for two or three lead core P.P rope to make it smooth surface of the main line for mechanization of the continuous fishing operation.

  • PDF

Analysis on fishing conditions of the Korean tuna purse seiner operating in the western and central Pacific Ocean (중서부태평양 한국 다랑어 선망어선의 조업실태 분석)

  • PARK, Yong-Ye;LEE, Yoo-Won;LEE, Dae-Jae
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.52 no.4
    • /
    • pp.356-363
    • /
    • 2016
  • To suggest more efficient fishing operation, it was analyzed using five years (2011~2015) catch data of six Korean-flagged tuna purse seiners (with 1000 mt of haul capacity) operating in the western and central Pacific Ocean. In terms of annual total catch, it presented a two-year cycle of variation on catch, showing that catches of 2012, 2014 and 2015 were high, whereas those of 2011 and 2013 were low. The proportions on fishing effort of associated set were around 21.9~30.8% having 21.5~45.0% of total catch. In this study, there was no significant difference between catches of unassociated set and associated set. When considered having good fishing conditions, fishing activities were concentrated in the areas of Papua New Guinea (PNG) and Kiribati, while it showed that fishing ground spreaded out to the areas of not only PNG and Kiribati but also Federated States of Micronesia (FSM), Tuvalu and Solomon islands. The average number of fishing days was 271 with a range of 246~285. As restriction on fishing operation such as reduction of fishing days and higher fishing fee are expected to strengthen, the result of this study will be helpful to select more efficient fishing methods for purse seine fishery based on fishing conditions.

Risk evaluation of fisher's safety on stow net fishing vessel (안강망어선에서 조업하는 선원의 위험도 평가)

  • HYUN, Yun-Ki;KIM, Hyung-seok;LEE, Yoo-Won
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.56 no.2
    • /
    • pp.138-146
    • /
    • 2020
  • Stow net fishery is one of the fishery with high fishing work accidents in southwestern sea of Korea. We conducted to serve as basic data for improving the healthy and safe working environment of fisher using risk assessment process (ISO45001) with fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) from 2016 to 2018. The average occurrence rate of victim in this fishery was 9.04%, 16.7 times more than such rate in all industries. In addition, the average fatality rate was found to have a very serious level management to 31.06‱, 27.7 times more than such rate in all industries. The safety hazards of stow net fishery was more likely to occur by other general industrial groups, with more severe consequences after the accident. According to 4M analysis, 58.6% of all accidents were caused by human factors, 24.0% by environmental factors, 16.0% by mechanical factors, and 1.5% by managerial factors, respectively. The occurrence frequency by accident type was the highest in 187 cases (32.2%) for struck by object, 158 cases (27.2%) for slipping, and 94 cases (16.2%) for being in contact with machinery. Severity is the highest for others such as diseases etc., in the order of being struck by object, being in contact with machinery, falling from above slipping, collapsing, bumping, and burning. Being struck by object, being in contact with machinery, and slipping are high-risk groups, falling from above others, bumping, and burning are medium-risk groups based on the risk assessment using the occurrence frequency and severity of accident. The obtained results are expected to contribute to the safe operation environment subsidy for fishing crews on the stow net fishing vessel.

Risk factors of fisher on stow net fishing vessel using analysis of adjudication (재결서 분석을 통한 안강망어선에 승선하는 선원의 위험요인)

  • KIM, Wook-Sung;HYUN, Yun-Ki;LEE, Yoo-Won
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.56 no.2
    • /
    • pp.155-162
    • /
    • 2020
  • The adjudication of Korean Maritime Safety Tribunal (KMST) was analyzed to collect basic data to identify the cause of the risk that did not appear in the current data provided by the fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) in stow net fishing vessel from 2015 to 2019. The personnel's carelessness was the most common in 29 out of 33 accidents (87.9%), followed by 25 cases (75.8%) of inadequacy of instructions, 24 cases (72.7%) of inadequacy of education on hazard factor, 20 cases (60.6%) of no personal protection equipment, 18 cases (54.5%) of poor guard, 17 cases (51.5%) of inadequacy of work method, 16 cases (48.5%) of absence of emergency stop button, 14 cases (42.4%) of work practice of poor safety precautions that affected more than 40% of all accidents as accident causes. These causes had a strong influence on each other, and the ratio of accident causes is high. With this relationship, accidents can be prevented or the severity of human injury can be reduced if types of accident process can be estimated with a scenario, and the key points before the accident in the scenario are switched to safe points.

Risk awareness survey of fisher on stow net fishing vessel using a questionnaire (설문을 통한 안강망어선에 승선하는 선원의 위험인식 조사)

  • HYUN, Yun-Ki;KIM, Hyung-seok;LEE, Yoo-Won
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.56 no.2
    • /
    • pp.147-154
    • /
    • 2020
  • The questionnaire survey was carried out to collect basic data to identify the cause of the risk that did not appear in the current data provided by the fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) to the onsite specialist, such as a fishing master, chief engineer and fisher in stow net fishing vessel from June to July 2018. The results are as follows. A total of 134 cases were surveyed, including 53 cases in Yeosu, 44 cases in Mokpo, 30 cases in Boryeong and 7 cases in Gunsan. Approximately 60% of the respondents on board the stow net fishing vessel were more than 20 years old, and the boarding experience was seasoned and suitable for the respondents. In the 4M analysis by safety accident factor during fishing work, the mechanical factors included 51 cases (25.0%) of decrepit equipment or poor maintenance and 49 cases (24.0%) of systemic error of fishing equipment. The environmental factors exhibited 71 cases (33.5%) of poor communication by mixed manning of foreign fishermen and 63 cases (29.7%) of poor environment such as heavy weather etc. The human factors showed 78 cases (37.3%) of personnel's carelessness and 45 cases (21.5%) of unskillfulness of operating net and haulers. The management factors exhibited 59 cases (32.1%) of work practice of poor safety precautions and 56 cases (30.4%) of inadequacy of education on hazard factor. The results are expected to contribute to the creation of a safe operating environment for stow net fishery, such as a fisher boarding a stow net fishing vessel, enabling the analysis of major causes of working safety accidents by cause.

A Study on the Remote Control System for Outboard Engine (선외기 원격제어시스템에 관한 연구)

  • Jung, Gab-Dong;Kim, Hyun-Soo;Ahn, Byong-Won
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.13 no.3
    • /
    • pp.229-234
    • /
    • 2007
  • Currently offshore fisheries are one of shrinking industries and fishermen are getting older. Moreover it is difficult to work fisheries for decreasing fishermen as the time goes. Two people per a boat work together at least for proper fisheries. If the unskilled fisherman boards on boat, it will make some troubles to speak each other and diminish the efficiency of working because one person should control the boat. So it need to study the remote control system for leasure and outboard engine that can control and work at the same time. The remote control system is consisted of engine, steering gear and forward reverse neutral gear controls. These three controls are made by position and speed control using DC motor, and microcontroller is used to control the engine speed and rudder angle. This system can be controled and worked alone and we tested the system at sea and confirmed that the system works properly.

  • PDF