• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.293-300
• /
• 1997

This paper is concerned with the vibration control of multi-layer structure for ultra-tall buildings and main tower of large bridge etc. We have modeled the multi-layer structure with the distributed mass system as the lumped mass system of two-degree-of-freedom structure and made experimental equipment. The H$_{\infty}$ control theory is applied to the design of the control system. The designed control system is simulated by computer. As a result, the designed H$_{\infty}$ controller showed good vibration control performance to impact excitation and the good frequency response.e.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.2
• /
• pp.97-108
• /
• 1994

The DC Servo Motor has been used as an actuator in automatic control fields because of the good response and the control easiness nevertheless it has some disadvantage such as spark at the brush. Recently, along with the fast development of semiconductor industries, the digital control scheme is increasing in comparison with analog control because of the strength against noise and the accuracy. In this paper, authors proposed a combined control algorithm, which is mixed Modified Minimum Time Position Control(MMTPC) and PI control algorithm. for minimum time position control of DC Servo Motor by the one-chip microcontroller. The proposed control algorithm showed the fast response and offset-free. The validity of the proposed method comparing with the VSS control is proved by the response experiments.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.85-87
• /
• 2003

Intermediate annealing was carried out during wire drawing for uniform deformation of 500 m class Bi-2223/Ag HTS tapes. Wire drawing force was measured to evaluate the uniformity of wire deformation along the length. To prevent sausage and filament breakage of wire, drawing stress was controlled below 200 MPa by using intermediate annealing process. Thickness and width of the rolled tapes was measured 0.23 mm and 4.1 mm with low deviation $\pm$ 0.08 mm and $\pm$ 0.09 mm, respectively. The critical current of the 500 m tapes was measured 33.7 A $\pm$ 3.7 A by continuous critical current measurement system.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.105-108
• /
• 2003

Long length of Bi-2223 superconducting wires were fabricated by stacking, drawing process with different precursor owders and different heat-treatment histories. The precursor powders were 2 kinds of Pb content. And a part of the tapes were experienced pre-annealing process which caused tetragonal structure of Bi-2212 phase to orthorhombic structure of it was during drawing process. We confirmed the transformation of Bi-2212 phase from tetragonal structure to orthorhombic structure and reduction of second phases. We designed and made a continuous Ic measurement system for Bi-2223/Ag HTS tape. We could achieve best Ic of 65 A at the Bi-2223/Ag tape using low Pb content of precursor powder and experienced pre-annealing process.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.65-67
• /
• 2003

The critical current of Bi-2223/Ag HTS wire could be improved by the second phase modification pre-treatment (SPMT). On the other hand, the pre-treatment conditions are possible to affect to the degradation of silver alloy sheath, such as brittleness. Chlorine was detected at the outer sheath of wire by Auger observation, we also have tried to search new pre-treatment conditions that do not affect the degradation of silver sheath but, improve the critical current of the wire.

• 보존과학연구
• /
• s.14
• /
• pp.1-34
• /
• 1993

1. Metallurgical Properties of Iron artifacts excavated from Yangju-Mountain fortress were studied for the scientific conservation and metallurgical history of ancient Iron artifacts.2. Iron artifacts form Yangju-Mountain fortress were found to be the products of having well-established Carburizing and remelting technique in that period.3. These artifacts seem to be manufactured from very pure ores, because very pure ferrite structure and low impurity.4. Especially evidence of very suitable carburizing technic well-established and usealloying method of Fe-C system on purpose were found.5. Cast iron artifacts were found to be eutectic composition (4.31%) having lowestmelting point in Fe-C system.

• Annual Conference on Human and Language Technology
• /
• 1999.10e
• /
• pp.150-155
• /
• 1999

다국어를 이용한 통계적 자연어 처리의 연구가 진행됨에 따라 병렬 말뭉치의 중요성이 대두되고 있다. 그러나 여러 가지 제약점으로 인하여 현재 이용 가능한 한국어 병렬 말뭉치가 드문 상황이다. 월드 와이드 웹 상에는 다양한 언어로 번역된 문서들이 있으며 이를 병렬 말뭉치로 구축, 활용한다면 말뭉치의 희소성으로 인한 문제를 해결할 수 있다. 본 논문에서는 웹 상에서 번역문서 후보를 추출한 다음 HTML 문서 구조를 비교하여 번역문서인지를 판별하고 문장 단위 정렬을 이용하여 병렬 말뭉치로 구축하는 방법을 제시한다.

• Journal of Power System Engineering
• /
• v.3 no.1
• /
• pp.60-66
• /
• 1999

Most of the small-type fishing boats in this country don't have the autopilot system such as the large ships have. In this papers, we describes on the development of electro magnetic compass for the autopilot system of the small-type fishing boat, which is utilized the MR(magnetic resistance) device and the inclination sensor. And we investigated the validity of the developed electro magnetic compass through results of actual experiment.

• Journal of Power System Engineering
• /
• v.4 no.4
• /
• pp.84-91
• /
• 2000

This paper describes a state feedback controller design method of the integral type magnetic levitation servo system which satisfies the design objectives. The design objective is a $H_{\infty}$ performance, asymptotic disturbance rejection and a robust pole assignment in linear matrix inequality(LMI) region. To the end, we investigated the validity of the designed controller which considering a robust pole assignment region, through results of simulation.

• Journal of Power System Engineering
• /
• v.1 no.1
• /
• pp.144-153
• /
• 1997

The magnetic levitation system is utilized in the magnetic bearing of high-speed rotor because of little friction, no lubrication, no noise and so on. The magnetic levitation system need the feedback controller for the stabilization of system, and gap sensors are generally used to measure the gap. The use of gap sensors brings out the increase of the number of troublesome, and the decrease of the control performance because of the dislocation between the measurement point and the control point. This paper presents the design of the gap estimation circuit for the sensorless method proposed by authors in the magnetic levitation system. We made the gap estimation circuit which was composed of both the superposition circuit and the measuring circuit. And we investigated the validity of the usefulness of the proposed sensorless method in the magnetic levitation system through results of actual experiment.