• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.4
• /
• pp.341-348
• /
• 2016

The experiments related on structure and water electrolysis performance of HALE UAV stack were conducted in this study. Anode catalyst $IrRuO_2$ was prepared by Adam's fusion methods as 2~3 nm nano sized particles, and the cathode catalyst was used as commercial product of Premetek. The MEA (membrane electrode assembly) was manufactured by decal methods, anode and anode catalytic layers were prepared by electro-spray. HALE stack was composed of 5 multi-cells as $0.2Nm^3/hr$ hydrogen production rate with hydrogen pressure as 10 bar. The water electrolysis performance was investigated at atmospheric pressure and temperature of $55^{\circ}C$. Best performance of HALE UAV stack was recorded as cell voltage efficiency as 86%.

• Membrane Journal
• /
• v.15 no.4
• /
• pp.255-271
• /
• 2005

polymer/layered silicate nanocomposite (PLSNs) is new type of materials, based on clays usually rendered hydrophobic through ionic exchange of the sodium interlayer cation with an onium cation. It could be prepared via various synthetic routes comprising exfoliation adsorption, in situ intercalative polymerization and melt intercalation. The whole range of polymer is used, i.e. thermoplastics, thermosets and elastomers as a matrix. Two types of structure may be obtained, namely intercalated nanocomposites where the polymer chains are sandwiched in between silicate layers and exfolicate nanocomposites where the separated, individual silicate layers are more or less uniformly dispersed in the polymer matrix. This new family of materials exhibits enhanced properties at very low filer level, usually inferior to 5wt$\%$, such as increased mechanical properties, increase in thermal stability and gas barrier properties and good flame retardancy. Gas permeability through the PLSNs films decreased due to increased tortuosity made by intercalation or exfoliation of clay in polymer.

• The Korean Journal of Physiology
• /
• v.23 no.2
• /
• pp.237-252
• /
• 1989

Effect of a $Na^+$ gradient on $Ca^{2+}$ uptake was studied in isolated sarcolemmal vesicles of cat ileal longitudinal muscle. $Ca^{2+}$ uptake was markedly stimulated in the presence of an outwardly directed $Na^+$ gradient. External $Na^+$, monensin and A23187 abolished the $Na^+-dependent$ $Ca^{2+}$ uptake. Monovalent cations such as $K^+$, $Li^+$, $Rb^+$, $Cs^+$ and choline could not substitute for $Na^+$ in enhancement of $Ca^{2+}$ uptake. Divalent cations such as $Ba^{2+}$, $Sr^{2+}$, $Mn^{2+}$ and $Cd^{2+}$ but not $Mg^{2+}$ inhibited the $Na^+-dependent$ $Ca^{2+}$ uptake. Increase in external pH in the range of 6.0 to 8.0 stimulated the $Na^+-dependent$ $Ca^{2+}$ uptake. Amiloride inhibited the $Na^+-dependent$ $Ca^{2+}$ uptake at concentrations above 0.5 mM, whereas diltiazem or vanadate did not. The apparent Km of the $Na^+-dependent$ $Ca^{2+}$ uptake for $Ca^{2+}$ was 18.2 ${\mu}M$ and apparent Vmax was 689.7 pmole/mg protein/5 sec. Kinetic analysis of the $Na^+-dependent$ $Ca^{2+}$ uptake showed a noncompetitive interaction between internal $Na^+$ and external $Ca^{2+}$. The dependence of $Ca^{2+}$ uptake on internal $Na^+$ showed sigmoidal kinetics and Hill coefficient for internal $Na^+$ was 2.52. Inside positive membrane potential generated by imposing an inwardly directed $K^+$ gradient and valinomycin significantly stimulated the $Na^+-dependent$ $Ca^{2+}$ uptake. These results indicate that a $Na^+-Ca^{2+}$ exchange system exists in the sarcolemmal membranes isolated from cat ileal longitudinal muscle and it might operate as an electrogenic process.

• Membrane Journal
• /
• v.4 no.3
• /
• pp.163-170
• /
• 1994

The separation of inorganic salt from amino acid solution using was performed electrodialysis. In order to review the availability of electrodialysis using isoelectric point of amino acid as a bio-separation technique, electrodialysis stacks were designed using ion exchange membrane. Separation of NaCl from amino acid solution was performed in the condition similar to amino acid fermentation process. To obtain otimum conditions of separation, leakage of amino acid depending of pH and limiting current density were measured. On the basis of optimum condition, removal of NaCl and leakage of amino acid were investigated quantitatively in batch and continuous process, and current efficiencies were also obtained. As a result of batch experiment for 11 hours each amino acid solution, removal efficiencies of NaCl were in the ranges of 96.1~96.2%. Amino acid leakage rate of glycine, methionine, alanine were 2.5, 1.7, 2.0% respectively. Current efficiencies were in the ranges of 44.5~44.6%. As a result of continuous experiment in various flow rate of each amino acid solution, it took 120 ~ 150 min to reach to steady state. Removal efficiency of NaCl was increased as the flow rate was decreased, but current efficiency was decreased. At the steady states, there were no leakage of amino acid.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.868-873
• /
• 2019

In this study, the evaluation of performance of AORFB using methyl viologen and TEMPOL as organic active materials in neutral supporting electrolyte (NaCl) with various membrane types was performed. Using methyl viologen and TEMPOL as active materials in neutral electrolyte solution, the cell voltage is 1.37V which is relatively high value for AORFB. Two types of membranes were examined for performance comparison. First, when using Nafion 117 membrane which is commercial cation exchange membrane, only the charge process occurred in the first cycle and the single cell couldn't work because of its high resistance. However, when using Fumasep anion exchange membrane (FAA-3-50) instead of Nafion 117 membrane, the result was obtained as the totally different charge-discharge graphs. When current density was $40mA{\cdot}cm^{-2}$ and cut off voltage range was from 0.55 V to 1.7 V, the charge efficiency (CE) was 97% and voltage efficiency (VE) was 78%. In addition, the discharge capacity was $1.44Ah{\cdot}L^{-1}$ which was 54% of theoretical capacity ($2.68Ah{\cdot}L^{-1}$) at $10^{th}$ cycle and the capacity loss rate was $0.0015Ah{\cdot}L^{-1}$ per cycle during 50 cycles. Through cyclic voltammetry test, it seems that this difference in the performance between the full cell using Nafion 117 membrane and Fumasep anion exchange membrane came from increasing resistance due to chemical reaction between membrane and active material, not the capacity loss due to cross-over of active material through membrane.

• Membrane Journal
• /
• v.13 no.2
• /
• pp.110-117
• /
• 2003

Sulfonated polyimides had been utilized and studied widely as available materials in chloro-alkali electrolysis, cationic exchange resins, and so on. However, a slow decrease in performance during experiments had been reported, which could be attributed to a loss of ionic conductivity related to either a continuous dehydration or polymer degradation. One of main reasons to account for the degradation of sulfonated polymers is the hydrolysis leading to polymer chain scission and decrement of molecular weight. Therefore, the objective of our study was to investigate possible imide cycle and additional ester bond cleavage connected with $SO_3$H presence under hydrated condition. In order to confirm and obtain as clear information as possible about breakages of bonds via $^1H\; and \;^{13}C$ NMR and IR spectroscopic analyses, our study was performed by model compound. Consequently, model compounds with both phthalic and naphthalenic imide ring and ester bonds were synthesized to evaluate the hydrolysis stability of sulfonated polyimide. The experiments were performed for prepared model compounds before and after aging in deionized water at $80^{\circ}C$ and were terminated by lyophilization technique. The aging products were finally analyzed by NMR and IR spectroscopy.

• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.45-50
• /
• 2023

Microfluidic preconcentration technologies, which collect or extract low-abundance analytes in a specific location, have been spotlighted in various applications such as medical and bio-engineering. Here, we conducted extensive studies on the variables to be considered when concentrating target samples based on electrophoresis in an electromembrane system utilizing an ion exchange membrane. Using negatively charged Alexa Fluor 488 and positively charged Rhodamine 6G as fluorescent dyes, we examined the effects of flow velocity of the main channel, channel electrolyte concentration, and applied voltage on sample preconcentration. As a result, it was found that the preconcentration of the target sample occurs much better when the flow velocity is slow and the concentration of the main channel containing the sample is high, given that the channel concentration ratio (main and buffer) is constant. In addition, based on the experimental data acquired in this study, the electrophoretic mobility values of Alexa Fluor 488 and Rhodamine 6G were experimentally calculated and compared.

• Membrane Journal
• /
• v.21 no.1
• /
• pp.1-12
• /
• 2011

Partially fluorinated poly(arylene ether sulfone) block ionomer membranes with different branch degree for fuel cell applications were investigated. A sulfonable monomer, a non-sulfonable monomer and a trifunctional branching agent were synthesized and the sulfonable monomer was oligomerized to obtain block structures. The oligomer was then further polymerized with the non-sulfonable monomer and the branching agent. The mole ratio of oligomer : non-sulfonable monomer was fixed at 4:6 and the content of the branching agent was varied from 0 to 2 mol% (BBC-40Bx). Post-sulfonation of BBC-40Bx was carried out using chlorosulfonic acid (CSA) (SBBC-40Bx). All the synthesized compounds were characterized by $^1H$-NMR, $^{19}F$-NMR and FT-IR. It was confirmed that the ion exchange capacity (IEC), water uptake and ion conductivity of SBBC-40Bx increased with the increment of branching agent content.

• Membrane Journal
• /
• v.15 no.3
• /
• pp.247-254
• /
• 2005

Chitosan film has potential applications in agriculture, food, and pharmacy. However, films made only from chitosan lack gas barrier and have poor mechanical properties. For enhanced gas barrier and mechanical properties, chitosan/clay nanocomposites have been prepared with montmorillonite (MMT) which is a layered structure of clays and chitosan. The cationic biopolymer, chitosan is intercalated into $Na^+-montmorillonite$ through cationic exchange and hydrogen bonding process. Diluted acetic acid is used as solvent f3r dissolving and dispersing chitosan. Chitosan was intercalated or exfoliated in MMT and it was confirmed by X-ray diffraction method. D-spacing of the characteristic peak from MMT plate in chitosan/clay nanocomposites was moved and diminished. The thermal stability and the mechanical properties of the nanocomposites are measured by TGA and Universal Testing Machine. Gas permeability through the chitosan/clay nanocomposites films decreased due to increased tortuosity made by intercalation of clay in chitosan.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.3
• /
• pp.227-236
• /
• 2019

In this work, preparation and characterizations of hybrid membranes containing sulfonated poly(arylene ether sulfone) (SPES) and sulfonated poly(vinylidene fluoride-co-hexafluoropropylene) (SPVdF-co-HFP) (20, 30 or 40 wt%) were carried out. The structure of hybrid membranes was confirmed using X-ray diffraction (XRD) analysis and the Fourier transform infrared (FT-IR) spectroscopy. The prepared SPAES/SPVdF-30 membrane exhibits higher ionic conductivity of 68.9 mS/cm at $90^{\circ}C$ and 100% RH. Besides, the other studies showed that the hybrid membrane has good oxidation stability, thermal stability, and mechanical stability. Thus, we believe that the prepared hybrid membrane is suitable for the development of membranes for fuel cell applications.