• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.1
• /
• pp.33-40
• /
• 2023

Todorokite is a manganese oxide mineral containing Mg²⁺ in a tunnel structure in which MnO₆ octahedra share corners. In order to investigate the suitability and efficiency of high temperature-treated todorokite as a material for adsorption and fixation of Cs, Cs was ion exchanged and the amount of leached Cs from todorokite was measured. The todorokite used in this study was synthesized by transforming Na-birnessite to Mg-buserite and used as a precursor. After high temperature treatment, Cs exchanged todorokite changed to birnessite and hausmannite as the temperature increased. The amount of leached Cs was investigated for Cs exchanged todorokite which was reacted with distilled water and 1 M NaCl solution at different reaction times. In general, for the samples reacted with 1 M NaCl solution, the fixation of Cs was quite effective, although the amount of leached Cs was greater due to the ion exchange reaction with Na. As the treatment temperature increased, the amount of leached Cs increased and then decreased again, which was related to the mineral phases formed at each temperature. As birnessite was formed, the amount of leached Cs increased, but as birnessite decreased, that decreased again. As the mineral phase changed to hausemanite, the amount of Cs decreased rapidly. The results of our study show that Cs exchanged todorokite can be used as a material that effectively fixes Cs and prevents its diffusion by high temperature treatment.

• Journal of the Korean Chemical Society
• /
• v.20 no.6
• /
• pp.441-447
• /
• 1976

The infrared spectra obtained in the region of $4000∼1200 $cm^{-1}$ has been measured for pyridine, tertiary butylamine, and ethylenediamine adsorbed on various cation-exchanged silicates at various degassing temperature. It was possible to distinguish between protonic and aprotonic acid sites of all cation-exchanged silicates which exhibited both Bronsted and Lewis acidity. The sodium form appeared to be the least reactive towards adsorbates. The relative ratio of the band intensities of tertiary butylamine was directly related to the polarizing power of exchanged cations. Ethylenediamine was less easily desorbed from silicate surface than tertiary butylamine due to the additional amino group to react with surface active site, and probably to form ether hydrogen bond with surface oxgen by liberating migrating proton besides the coordination bond with Lewis acid site and the formation of$NH3^+$ species with Bronsted acid site.

• Journal of the Korean Chemical Society
• /
• v.46 no.6
• /
• pp.515-522
• /
• 2002

Solid beta-dicalcium silicate hydrate $(\beta-C_2SH)$ synthesized under hydrothermal conditions at $240^{\circ}C$ and Ca/Si=2 molar ratio shows cation exchange properties towards divalent metal cations such as Fe, Cu, Zn, Cd, or Pb. The ability of metal cation uptake by the solid was found to be in the order: $Fe^{2+}$〉$Cu^{2+}$〉$Zn^{2+}$〉$Cd^{2+}$ = $Pb^{2+}$. Cesium selectivity of the solid was demonstrated in the presence of univalent cation such as $Li^+$, $Na^+$ and $K^+$ and divalent cations such as $Ca^{2+}$, $Mg^{2+}$ and $Ba^{2+}$, which are one hundred times more concentrated than the $Cs^+$. The uptake of $Cs^+$ is maximum in the presence of $Mg^{2+}$ whereas it is minimum in the presence of $K^+$. The different affinities of ${\beta}-C_2SH$ towards divalent metal cations can be used for the separation of those ions. Due to its selectivity for cesium it can be used in partitioning of radioactive Cs+ from nuclear wastes containing numerous cations. The mechanism of the metal cation exchange and cesium selectivity reactions by the solid is studied.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.812-825
• /
• 2019

Two dolomite samples mined from the different mines were calcined using a batch-type microwave kiln ($950/60min^{\circ}C$) to produce $CaO{\cdot}MgO$. The hydration of the $CaO{\cdot}MgO$ samples shows different reactivity. MgO was separated by reacting with a strong acid cation exchange resin using the reactivity of the hydration properties of light dolomite ($CaO{\cdot}MgO$). Calcium ($Ca-(R-SO_3)_2$) was separated from the prepared $CaO{\cdot}MgO$ by the cation exchange resin ($CaO{\cdot}MgO:R-SO_3H=1:12mass%$). High purity MgO (higher than 94 mass %) with unburned $CaCO_3$ (1~2 mass %) was obtained by the separation process. The separated MgO was heated at $950^{\circ}C$ for 60 minutes to afford high purity MgO with MgO content higher than 96%. And High-grade $CaCO_3$ was prepared from the reaction with calcium adsorbed resin ($Ca-(R-SO_3)_2$) and NaOH, $CO_2$ gas.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.138-147
• /
• 1992

Chemically-modified electrodes were fabricated and their electrocatalytic behaviors have been investigated. As a modifying layer, poly-[1-methyl-3-(pyrrol-1-ylmethyl) pyridinium] was electropolymerized onto Pt electrodes under constant current. The thickness of the polymer film was controlled by means of total charge consumed during the electropolymerization. SEM was used to measure the thickness. There was a linear relationship between the passed charge and the film thickness. Ferro/ferricyanide, used as an electron mediator in this study, was rapidly ion-exchanged into the polymer layer with its concentration of 1.2~1.3M. It was found that electrooxidation of ascorbic acid is catalyzed by incorporated ferri/ferrocyanide couple. Kinetic parameters for electrooxidation were determined by RDE experiments. The results indicate that the present system corresponds to ER+S case based on the Saveant theory. Improving methods have been proposed to be R+S case which is ideal for electrocatalysis.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.4
• /
• pp.313-321
• /
• 2023

Numerous studies have investigated the adsorptive sequestration of radioactive cesium in the natural environment. Among these studies, adsorption onto minerals and high-temperature treatment stand out as highly effective, as demonstrated by the use of zeolite. In this study, cesium was ion-exchanged with birnessite and subsequently underwent high-temperature treatment up to 1100℃ to investigate both mineral phase transformation and the leaching characteristics of cesium. Birnessite has a layered structure consisting of MnO₆ octahedrons that share edges, demonstrating excellent cation adsorption capacity. The high-temperature treatment of cesium-ion-exchanged birnessite resulted in changes in the mineral phase, progressing from cryptomelane, bixbyite, birnessite to hausmannite as the temperature increased. This differs from the phase transformation observed in the tunneled manganese oxide mineral todorokite ion-exchanged with cesium, which shows phase transformation only to birnessite and hausmannite. The leaching of cesium from cesium-ion-exchanged birnessite was estimated by varying the reaction time using both distilled water and a 1 M NaCl solution. The leaching quantity changed according to the treatment temperature, reaction time, and type of reaction solution. Specifically, the cesium leaching was higher in the sample reacted with 1 M NaCl compared to the sample with distilled water and also increased with longer reaction time. For the samples reacted with distilled water, the cesium leaching initially increased and then decreased, while in the NaCl solution, the leaching decreased, increased again, and finally nearly stopped like the sample in the distilled water for the sample treated at 1100℃. These changes in leaching are closely associated with the mineral phases formed at different temperatures. The phase transformation to cryptomelane and birnessite enhanced cesium leaching, whereas bixbyite and hausmannite hindered leaching. Notably, hausmannite, the most stable phase occurring at the highest temperature, demonstrated the greatest ability to inhibit cesium leaching. This results strongly suggest that high-temperature treatment of cesium-ion-exchanged birnessite effectively immobilizes and sequesters cesium.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.525-531
• /
• 2006

In this study, Sulfonated PONF-g-styrene ion exchange fibers were synthesized by radiation induced graft copolymerization. And also, hybride ion exchange fibers, which was combined sulfonated PONF-g-styrene fibers and cationic ion exchange resin, were fabricated by hot melt adhesion method and then their adsorption properties were investigated. ion exchange capacity and water content of hybrid ion exchange fibers increased as compared with those of bead and ion exchange fiber. Their maximum values were 4.76 meq/g and 23.5%, respectively. Adsorption breakthrough time for mercury of hybrid ion exchange fiber was slower than those of bead resin and fibrous ion exchanger. It's value was 130 minutes. Their breakthrough time become short as increasing of pH, and concentration. The initial breakthrough time was observed before and after 10 minutes as increasing of concentration. The adsorption of hybrid ion exchange fibers for $Hg^{2+}\;Pb^{2+},\;Cd^{2+}$ among heavy metals in the mixed solution was observed before 20 min. And also, The adsorption for $Hg^{2+}$ among the heavy metals by hybride ion exchange fibers was observed.

• Journal of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.553-559
• /
• 1991

The elution characteristics of rare earth elements in $NH^{4+}$ form cation exchange resin had been investigated. Elution were performed varing the loading amount, column diameter, column length and eluent pH. Analysing the chemical species contained in each effluent, elution mechanisms of rare earth elements and the separation of rare earth elements in monazite could be understood. The resolution values of adjacent rare earth elements were improved increasing rare earths adsorption amount wfith the same column within it's exchange capacity. With $NH^{4+}$ resin form, column length does not affect on the resolution values and retention time of rare earth elements and the rare earth-EDTA complex were not adsorbed on $NH^{4+}$ resin form. pH of eluent affected on the reactivities between rare earth elements and EDTA. Decreasing eluent pH, resolution values of adjacent rare earth elements were increased while increasing elution time.

• Analytical Science and Technology
• /
• v.23 no.6
• /
• pp.566-571
• /
• 2010

This paper describes the sorption behaviors of aqueous uranium ions on the K-birnessite. K-birnessite was synthesized by adding a concentrated HCl to an aqueous solution of $KMnO_4$. Physicochemical characteristics of the K-birnessite, such as structure, specific surface area and surface charge, were investigated. K-birnessite is a layered material and the $K^+$ ions exist in the interlayer of layered K-birnessite. BET specific surface area of the K-birnessite was 38.30 m2/g. The surface charge of K-birnessite was $-1.65\;C/m^2$ at pH 5.00 and ionic strength of 0.010 M $NaClO_4$, at which the sorption experiments of uranium ions were carried out. Uranium ions were incorporated into the interlayer of the K-birnessite by cation-exchange reaction with $K^+$ ions, and the distribution coefficient is quite similar to those of common ion-exchange materials. The results might be applicable in the retardation of migration of radioactive materials from the underground disposal site of high-level radioactive waste.

• The Journal of Natural Sciences
• /
• v.5 no.1
• /
• pp.77-86
• /
• 1992

By cation-exchange-reaction long-chain organic cationic tensides can be intercalated in the montmorillonite layer space, and thus intercalations-complexes of montmorillonite with different properties of materials can be obtained. Such intercalations-complexes are finding strong technical appliances in many areas and are also used very often as model-systems for studying behaviors of materials. Therefore in this research intercalations-complexes of montmorillonite with organic cationic tensides ad model-systems were synthesized and their behabiors under various different conditions were studied.