• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.138-144
• /
• 2024

This paper presents a bistatic to monostatic conversion technique to analyze the bistatic target strength of submarines. The technique involves determining the transmission path length of acoustic waves, which are emitted from a source, scattered off an underwater target, and eventually received by a receiver. By generating a corresponding virtual scattering surface, this method effectively transforms the target strength analysis problem from bistatic to monostatic. The converted monostatic target strength problem can be assessed using a well-established monostatic numerical methods. The bistatic target strength analysis for Benchmark Target Strength Simulation (BeTTSi), a widely used target strength model were performed. The results were compared with those calculated by boundary element methods and Kirchhoff approximation, and confirmed the validity and the practical applicability of the proposed analysis technique for evaluating submarine target strength.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.12-22
• /
• 2017

It is important to predict accurately reverberation level, which is a limiting factor in underwater target detection. Recently, the studies have been expanded from monostatic sonar to bistatic sonar in which source and receivers are separated. To simulate the bistatic reverberation level, the computation processes for propagation, scattering strength, and scattering cross section are different from those in monostatic case and more complex computation processes are required. Although there have been many researches for bistatic reverberation, few studies have assessed the bistatic scattering cross section which is a key factor in simulate reverberation level. In this paper, a new method to estimate the bistatic scattering cross section is suggested, which uses the area of intersection between two circles. Finally, the reverberation levels simulated with the scattering cross section estimated using the method suggested in this paper are compared with those estimated using the methods previously suggested and those measured from an acoustic measurements conducted in May 2013.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.305-313
• /
• 2024

For effective bi-static sonar operation, detection performance analysis must be performed reflecting the characteristics of sound propagation due to the ocean environment and target information. However, previous studies analyzing bistatic sonar detection performance have either not considered the ocean environment and target characteristics or have been conducted using simplified approaches. Therefore, in this study, we compared and analyzed the bistatic detection performance in Yellow sea and Ulleung basin both with and without considering target characteristics. A numerical analysis model was used to derive an accurate bistatic target strength for the submarine-shaped target, and signal excess was calculated by reflecting the simulated target strength. As a result, significant changes in detection performance were observed depending on the source and receiver locations as well as the target strength.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.8
• /
• pp.389-394
• /
• 2006

Mid-Frequency bistatic reverberation level is modeled using ray theoretic algorithms. The algorithm assumes multiple forward/backward scatter along with reciprocity in the Propagation paths. The environments modeled are assumed to be range independent in bathymetry, bottom scattering and surface scattering. Mid-Frequency bistatic scattering algorithm is used as a scattering model. A comparison of predicted reverberation versus time with measured data is presented to verify the bistatic reverberation model. The result demonstrates that it is possible to obtain reasonable reverberation Predictions in experimental site.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.6
• /
• pp.472-481
• /
• 2003

Low-frequency hi-static reverberation model (LHYREV-B, Low-frequency Hanyang univ. Reverberation model-Bistatic) based on the parabolic approximation for shallow water environment is presented. In this paper bistatic reverberation level is computed using the angle-independent scattering strength function and the wave-based acoustic model. The signal simulated by the LHYREV-B model is compared with the observed signals and it is shown that the LHYREV-B model provides a closer fit to the observed signals.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.3
• /
• pp.224-232
• /
• 2003

In this paper, efficient deployment method of sensors and target positioning performance with respect to measurement error are dealt with. Active sonar can be categorized into Monostatic, Bistatic, Multistatic sonar, and characteristics of respective sonar are different. Assuming that each sensor can receive range and angular information, we compare the performance of Monostatic, Bistatic, and Multistatic systems. And we suggest Weighted least square (WLS) which gives the weight to former case, LS. In particular. adopting suggested method we investigate the target positioning performance according to number of sensor, distance from transmitter to receiver, and propose efficient arrangement rule for Multistatic sonar configurations. According to the experimental results, RMSE of Multistatic sonar is found to be superior to Monostatic and Bistatic by 35.98%. 37.45% respectively, and WLS is superior to LS approximately by 7.4% in average. Furthermore, as the difference of respective sensor's variance is large, it is observed that the improvement ratio of target positioning performance is increased.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.3
• /
• pp.139-146
• /
• 2018

Monostatic sonar systems localize targets using the time information of pulse transmission and receipt. Whereas, in asynchronous bistatic sonar systems, receivers need to detect direct blast to localize targets, since a source doesn't share pulse information with receivers. In this paper, we propose a direct blast detection algorithm, which estimates PRI (Pulse Repetition Interval) of direct blast and adaptive thresholds. Experimental results show the proposed algorithm has robust direct blast detection performance in the environment where strong background noise and target signal exist.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.4
• /
• pp.419-425
• /
• 2022

This paper aims to evaluate the acoustic detection performance for the deployment of the source and receiver positions of a bi-static sonar. In contrast with a mono-static sonar, a bi-static sonar has a large amount of computation and complexity for deployment. Therefore, in this study, we propose an assessment method that reduces the amount of computation while considering the variability of the ocean environment as a method to apply to the placement of the source and receiver of a bi-static sonar. First, we assume the representative ocean environment in the shallow and deep water. The signal excess is calculated with the source to receiver ranges and sensor depths. And the result is compared with the proposed assessment method of acoustic detection performance.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.4
• /
• pp.437-444
• /
• 2024

Bistatic sonar performance varies significantly depending on the ocean environment, the location (latitude, longitude) and water depth of the source and receiver. Therefore, research on optimal deployment of bistatic sonar considering ocean environment is necessary. In this study, we suggest an algorithm to optimize the location and water depth of source and receiver when operating monostatic and bistatic sonar on two spatially separated surface ships in the Ulleung Basin in the East Sea. A particle swarm optimization algorithm was used to search the location and water depth of the source and receiver to maximize the detectable area within the search area. As a result of performing bistatic sonar deployment using the algorithm proposed in this study, the detectable area increased as the number of model iterations increased. Additionally, it was confirmed that the source and receiver on the two surface ships converged to the optimal location and water depth.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.4
• /
• pp.445-454
• /
• 2024

To detect underwater targets using sonar, sonar performance analysis that reflects the ocean environment and sonar characteristics must be performed. Sonar performance modeling of passive and monostatic sonar can be performed relatively quickly even considering the ocean environment. However, since bistatic and multistatic sonar performance modeling require higher computational complexity and much more time than passive or monostatic sonar cases, they have been performed by simplifying or not considering the ocean environment. In thisstudy, the effects of reverberation and ocean environment in bistatic sonar performance were analyzed using the bistatic reverberation modeling in the Ulleung Basin of the East Sea. As the sonar operation depth approaches the sound channel axis, the influence of the bathymetry on sound propagation is reduced, and the reverberation limited environment is formed only at short distances. Finally, it was confirmed that similar trends appeared through comparison between the simplified and elaborately calculated sonar performance modeling results.