• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.751-758
• /
• 2020

As the application fields using various types of communication, including the Internet of Things, have emerged, the form of communication has been diversified. Some applications require fast feedback and the others continue to send data regardless of whether it is received or not. Transmitting data in one way can be acknowledged by the opposite direction response. These information exchanges form a two-way communication. For applications that need to issue commands remotely, such as network control systems, it is important to give a fast response because the sender decides the next action based on the response from the recipient. In this paper, we propose the base station (BS) cooperation to improve the latency performance of the two-way communication in cellular networks. We design the two-way communication strategy utilizing cooperating BSs with the same direction of traffic as well as bidirectional traffic. We show that the proposed scheme improves the latency performance than the previous works.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.1
• /
• pp.39-53
• /
• 2019

Bi-directional pile load test (briefly called 'BDH PLT') cannot be performed at loading levels where ultimate bearing capacity could be assessed in field, it is not possible to precisely determine both ultimate load and yield load and under loading. Since the load is transmitted separately to the skin and the end unlike the static pile load test (briefly called 'SPLT') and the direction of loading on the skin is opposite, such methods could have a result different from actual movements of shafts. In this study, three-dimensional finite element method (briefly called '3D FEM') analysis was conducted from results of the BDH PLT, made with barret piles, which were large-diameter cast-in-place concrete piles, and the calculated design constants were applied to the 3D FEM analysis of the SPLT to interpret them numerically and then, actual behaviors of cast-in-place concrete piles were estimated. First, using the results of the BDH PLT with cast-in-place concrete piles, behaviors of the piles made by loading upwards and downwards were analyzed to calculate load-displacement. Second, the design constants, calculated by the 3D FEM analysis and the back analysis, were applied on the 3D FEM analysis for the SPLT, and from these results, behaviors of the SPLT through the BDH PLT was analyzed. Last, the results of the 3D FEM analysis of the SPLT through the BDH PLT was expressed in relationships as {A ratio of bearing capacity of the SPLT and of the BDH PLT (y)} ~ {A ratio of reference displacement and pile circumference (x)}, and they were all classified by reference displacement at 10.0 mm, 15.0 mm, and 25.4 mm.

• Korea Information Processing Society Review
• /
• v.11 no.1
• /
• pp.84-92
• /
• 2004

최근 방송, 통신, 컴퓨터를 융합한 디지털 기술의 급속한 발전으로 방송사업자가 기존의 단방향 방송서비스 제공에서 벗어나 시청자가 참여할 수 있는 TV-Commerce, 양방향 광고, TV-AnyTime, 주문형 비디오(VOD) 등의 사용자 요구 중심의 다양한 양방향 방송서비스를 제공할 수 있게 되었다.(중략)

• The Mathematical Education
• /
• v.33 no.1
• /
• pp.75-82
• /
• 1994

리더를 선출하는 기존의 선거 전략은 노드의 성능을 고려하지 않아서 양질의 리더를 선출할 수 없다. 이러한 문제점을 해결하기 위하여 성능을 고려하여 리더를 선출하는 방안에 대한 연구가 진행 되고 있다. 본 논문에서는 성능을 양방향 지연값을 선호도로 할 때, 선거전략중 다수결 선거 전략을 확률론적으로 분석하였다.

• Information and Communications Magazine
• /
• v.13 no.11
• /
• pp.192-210
• /
• 1996

본 고에서는 일반 가정 및 소규모 업무용 가입자들을 대상으로 광대역 멀티미디어 서비스를 경제적으로 제공할 수 있는 ATM 기반의 디지털 Hybrid Fiber-Coax 망에 대한 표준화 동향을 분석하고, 양방향 통신 서비스를 수용하기 위한 기술적 사항에 대해 고찰한 내용을 기술한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2B
• /
• pp.97-109
• /
• 2012

In this paper, we propose a modulation scheme for a network-coded bi-directional relaying (NBR) system over an asymmetric channel, which means that the qualities of the relay channel (the link between the BS and RS) and access channel (the link between the RS and MS) are not identical. The proposed scheme employs a dual constellation in such a way that the RS broadcasts the network-coded symbols modulated by two different constellations to the MS and BS over two consecutive transmission intervals. We derive an upper bound on the average bit error rate (BER) of the proposed scheme, and compare it with the hybrid constellation-based modulation scheme proposed for the asymmetric bi-directional link. Furthermore, we investigate the channel utilization of the existing bi-directional relaying schemes as well as the NBR system with the proposed dual constellation diversity-based modulation (DCD). From our simulation results, we show that the DCD gives better average BER performance about 3.5~4dB when $E_b/N_0$ is equal to $10^{-2}$, while maintaining the same spectral efficiency as the existing NBR schemes over the asymmetric bi-directional relaying channel.

• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.137-144
• /
• 2018

The study figured out the operational conditions of a two-way movement actuator made of one-way shape memory alloy (OWSMA) for versatile ventilation intelligent garments. To develop a low-power actuator that consumes energy only when a garment changes its form such as opening and closing, multiple channels of OWSMA were used, and optimum diameter of the wires was examined. For the switch device, optimum voltage application unit time was determined. Optimum diameter of OWSMA wire was determined by applying 3.7V to the pre-determined candidate diameters, which demonstrated two-way operation in previous studies. In order to evaluate the optimum voltage application time, the internal diameter of the actuator was measured while increasing and decreasing by 50 ms from the unit time of voltage application. Delay time under two-way operation of the actuator was measured to minimize interference caused by heat between channels. Power of 3.7V was applied to OWSMA for assessment of optimal time, and the whole process from heating to cooling was video-recorded with a thermal image camera to determine the point of time at which the temperature of OWSMA wire dropped below the phase transformation temperature. The results showed that $0.4{\Phi}$ was the most suitable diameter, and the optimum unit time of voltage applied to open and close the actuator was 4100ms. It was also shown that the delay time should be more than 1.8 seconds between two-way operations of the actuator.

• Journal of Digital Convergence
• /
• v.12 no.6
• /
• pp.375-384
• /
• 2014

This research was done to determine and analyze a qualitative on the essential structure of the experiences of stroke patients with combined treatment of oriental and western medicine. Methods: Participants in this study were targeting 25 stroke patients who live mostly in D city and received the combined treatment of oriental and western medicine, but received oriental medicine treatments based on their own wills. Data were collected and recorded through in-depth interviews. Data analysis was conducted by Colaizzi's phenomenological method. Results: As a result, their acculturation were classified into 21 clusters of theme and 6 categories. Selected 6 categories as follows. 'being severely shocked from sudden attack', 'being depressed with rehabilitation', 'western therapy was more effective in emergency situations', 'having limitations in western therapy', 'selecting oriental therapy for themselves', 'discovering the meaning of rehabilitation in oriental therapy'. Conclusion: Based on these necessary data for systematic oriental rehabilitation development.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.5
• /
• pp.1-10
• /
• 2014

This research focuses on the warrants for the Two-Way Left-Turn Lanes (TWLTL). Using a microscopic traffic simulation tool, two key parameters were investigated herewith. One is a wide range of the Design Hourly Volume (DHV), reflective of recent Korean roadway volume characteristics, that is conventionally reduced from the Average Daily Traffic (ADT). The other is driveway spacing, the length of the middle-lane section where two conflicting left-turn demands often compete for space. In addition, unlike previous researches, the way and the procedure the TWLTL operation is realized in the VISSIM S/W with its add-on application such as VISVAP is clearly stated and described in detail. According to the result of simulations for 10 volume scenarios, as expected, the higher the volume level is, the more delay the left-tuner experience. The Level Of Service (LOS) for most cases was in the range of C and D based on the non-signalized intersection LOS criteria. Furthermore, the TWLTL was found operable up to the volume level of 1,116 and 1,860 vph in heavy direction (equivalent of volume level 7) for 3-lane and 5-lane facility respectively, which covers significant portion of existing two to four-lane highway volumes in Korea.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.9
• /
• pp.5-12
• /
• 2013

In this study, each top-down load test and bi-directional load test has been performed on the 480mm diameter of two rock socketed drilled shafts, which are located next to each other, and the results have been compared. The result shows that the settlement from the equivalent load-settlement curve of bi-directional load test is smaller than one from top-down load test, because elastic is not considered in equivalent load-settlement curve of bi-directional load test. Therefore elastic shortening should be considered to obtain appropriate equivalent load-settlement curve. Three existing methods used to obtain equivalent load-settlement curve with consideration of elastic shortening has been compared with the result of top-down load test. The result shows that those existing methods are sufficiently applicable to the design. In addition, result of comparison between top-down load test and bi-directional load test shows that bi-directional load test was found to overestimate bearing capacity because it does not consider pile body failure.