• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.5
• /
• pp.65-72
• /
• 2000

This paper presents the study of the tension control in a web transfer system. In this study the sliding mode controller is applied to a time-varying nonlinear mathematical model. The model was derived to consider the effects of changing the roll radius in tension variation during winding and unwinding. The uncertainty in modeling may be due to unmodelled dynamics, on variations in system model. Designed sliding mode controller made the system error always staying in the suggested surface from the beginning. Through this, system is maintained to be robust against a disturbance and uncertainty. To verify the designed controller has a good performance, various inputs such as desired velocity, step input, and trapezoidal input are applied. When the sliding mode controller was used, the system(the tension control) performance was improved comparing to the PID controller. The robustness of the controller with respect to an estimation error was verified through simulations.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.239-240
• /
• 2014

$In_2O_3$에 Sn이 도핑된 Indium Tin Oxdie (ITO)는 높은 전기전도성 및 광투과율을 가지므로 터치센서, 태양전지, 스마트 윈도우, 플렉시블 디스플레이등의 수많은 광전자 소자에 필수적이다. 특히 스마트산업이 발전함에 따라 Touch Screen Panel (TSP) 에 적용되는 터치용 고품질 초박막 ITO의 수요가 증가하고 있다. 그러나 초박막 ITO 필름은 얇은 두께로 인해 낮은 결정성을 가지기 때문에 높은 전기전도성을 확보하기 힘들다. 따라서 본 연구에서는 결정성을 향상시키기 위하여 초기 박막 성장 메커니즘에 영향을 주는 인자를 제어하는데 목표를 두었으며 이러한 박막 초기의 성장에 영향을 미치는 인자들 중 자장강도를 변화시킴으로써 플라즈마 임피던스를 조절하였다. 그 결과 전기적 특성 및 광학적 특성은 자장강도에 매우 의존함을 확인할 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.87-88
• /
• 2015

최근 Touch screen panels (TSPs) 의 높은 전기적 특성 및 고해상도 요구에 따라 고품질 초박막 ITO의 중요성이 대두되고 있다. 하지만, 초박막 ITO 필름은 얇은 두께로 인해 낮은 결정성을 가지므로 높은 전기전도성을 확보하기 힘들다. 따라서 본 연구에서는, 결정성을 향상시키기 위하여 초기 박막의 성장에 영향을 주는 인자를 제어하였으며, 이러한 인자들 중 자장강도 변화에 따른 ITO 박막의 물성 변화를 관찰하였다. 그 결과 ITO 초박막의 전기적 특성은 스퍼터링 전류보다 스퍼터링 전압에 크게 의존하는 것을 확인 할 수 있었다.

• Membrane Journal
• /
• v.27 no.5
• /
• pp.406-414
• /
• 2017

In this study, we have developed pore-filled ion-exchange membranes (PFIEMs) filled with ionomer in a thin polyethylene porous film (thickness = $25{\mu}m$) and investigated the charge-discharge characteristics of the all vanadium redox flow battery (VRFB) employing them. Especially, the degree of crosslinking and free volume of the PFIEMs were appropriately controlled to produce ion-exchange membranes exhibiting both the low membrane resistance and low vanadium permeability by mixing crosslinking agents having different molecular size. As a result, the prepared PFIEMs exhibited excellent electrochemical properties which are comparable to those of the commercial membranes. Also, it was confirmed through the experiments of vanadium ion permeability and VRFB performance evaluation that the PFIEMs showed low vanadium ion permeability and high charge-discharge efficiency in comparison with the commercial membrane despite their thin film thickness.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.4
• /
• pp.356-360
• /
• 2000

In order to utilize the processing wastes of squid, chitosan was prepared by intermittent deacetylation treatment of ${\beta}-chitin$ richly contained in the pen of squid, and then their characteristics of chitosan and N-acetylchitosan film were studied. The acetylation time of N-acetylchitosan film-1 (N-ACE-1) manufactured from chitosan solution by treating with acetic anhydride was about 12 hrs. In SEM photomicrographs, the surface of chitosan film was regularly arranged netlike, and that of N-acetylchitosan film-2 (N-ACE-2) was rough like snowflake and larger than chitosan film. The chitosan film (thickness 0.02 mm, time 60 min) had the highest tensile strength ($1,240 kg/cm^2$) and elongation ($58.25{\%}$), N-ACP-1 (thickness 0.02 mm, time 60 min) had the highest water permeability ($539 g/m^2{\cdot}24 hrs$), oxygen permeability ($20,000 cm^3/m^2{\cdot}24 hrs{\cdot}atm$) and water uptake ($350{\%}$) among the tested films.

• KSBB Journal
• /
• v.22 no.6
• /
• pp.409-413
• /
• 2007

Polydiacetylene(PDA)-based sensors possess a number of properties that can be successfully applied for label-free detection system. PDA is one of the most attractive color-generating materials, with growing applications as sensors. Here we introduce various PDA-based devices, used as biosensor, chemosensor, thermosensor, and optoelectronics sensor. In general, PDA liposomes and films are closely packed and properly designed for polymerization via 1,4-addition reaction to form an ene-yne alternating polymer chain. PDA-based two/three dimensional structures have been used for colorimetric or fluorescent devices, sensing biological as well as chemical components. This color-generating material also present a very high charge carrier mobility, allowing its application as field-effect transistor (FET). The immobilized PDA structures or films have distinct advantages for the detection of low concentration target molecules over the aqueous solution-based detection systems. In the present review, reported detection methods by using various PDA structures are summarized with updated references.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.734-736
• /
• 2012

Cadmium telluride (CdTe) films have been prepared on Corning 7059 glass, molybdenum (Mo), and polyimide (PI) substrates by r.f. magnetron sputtering technique. The influence of the sputter pressure on the structural and optical properties of these films was evaluated. In addition, a comparison of the properties of the films deposited on fferent substrates was performed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.12
• /
• pp.1007-1010
• /
• 2017

In this paper, a frequency selective surface(FSS) with bandstop operation for radio-frequency spectrum management is presented. The proposed FSS is composed of patterns of fractal-based miniaturized unit cells for stable performance for angles of incidence and polarizations. For practical applications requiring high productivity and environmental compatibility, we fabricated a film-type FSS by screen-printing using Ag ink, rather than a conventional manufacturing method using a printed circuit board. To validate this study, we measured the transmission characteristics of the proposed FSS using the free-space measurement method, and observed the received strength of signal penetrating the FSS film applied to a wall.

• Journal of Adhesion and Interface
• /
• v.17 no.3
• /
• pp.89-95
• /
• 2016

An environmentally friendly water-based pressure sensitive adhesive (PSA) was designed in an attempt to replace the solvent-based adhesive for dry lamination used in flexible food packaging films. Instead of using a low molecular weight surfactant, which may have variable material properties, a high molecular weight dispersant was used for emulsification. A polymeric nano-dispersant (PND) was synthesized using solution polymerization, and it was used as a micelle seed in the surfactant, resulting in the synthesis of a core/shell grafted acrylic adhesive. The shell and core exhibited different $T_g$ values, so that the initial adhesion strength and holding power were complemented by the film's flexibility, which is required to provide good adhesion of thin films. Results showed that the PSA designed in this study using the PND instead of traditional low molecular weight surfactant had adhesive properties applicable to the flexible packaging with appropriate tack.

• Journal of the Korean Institute of Gas
• /
• v.8 no.3 s.24
• /
• pp.24-30
• /
• 2004

Gas hydrate formation process is studied in this paper. Natural gas was introduced into both pure water and water added anionic surfactant(promotor) at 276.65 K and 6 MPa. Gas hydrate nuclei was easily generated by instantaneous agitation. Gas hydrate film was formed on the interface of water and gas. The very thin film which was instantly covered the surface of the water, followed by generation of the clear film layer. Whiskery crystal of gas hydrate was created more actively in the water added naionic surfactant than in the pure water. Whiskery hydrate formed in the pure water looks like short and thick thread colony while the one shoes long and thin thread colony in the water added promoter.