• Journal of Welding and Joining
• /
• v.13 no.3
• /
• pp.1-7
• /
• 1995

1992년 9월 현재 전 세계적으로 운전 중(건설포함)인 액화 및 인수기지의 LNG 저장탱크는 지상식-이중벽 금속 탱크, 지상식-맴브레인 PC 탱크, 지상식-자립식 내부탱크/PC 외부탱크, 피드식-RC(Reinforced Concrete) 보강둑 탱크, 피트식-이중벽 금속탱크, 피트식-자립식 내부탱크/PC 외부탱크 및 지하식 탱크의 7가지 유형으로 나 타낼 수 있다. 또한 액화천연가스를 저장하는 내부탱크 소재에 따라 9%Ni강 및 MEMBRANE(SUS304) 형식으로 대별할 수 있다. MEMBRANE 저장탱크 형식의 핵심기술인 MEMBRANE은 -162.deg.C의 LNG에 의한 열수축팽창에 견딜 수 있도록 스테인레스강판 (SUS304)을 사용하여 기하학적으로 특이한 주름진 형상을 갖도록 설계되었으며 주름 형상에 따라 프랑스의 테크니가즈(Technigaz), 일본의 가와사끼(Kawasaki). 미쓰비시 (Mitsubishi), 이시가와지마하리마(Ishikawajima-Harima)사의 멤브레인과 세계에서 3번째로 한국가스공사 연구개발원이 개발한 링디식 멤브레인으로 구별할 수 있다. 본 해설에서는 국내의 전국 천연가스 공급사업계획 및 건설현황을 검토하고 최근 전 세계적으로 널리 사용되고 있는 액화천연가스 저장탱크의 종류를 용량별, 년도별로 분석하여 전세계의 액화천연가스 저장탱크에 관해 소개 하겠다.

• Journal of the Korean Institute of Gas
• /
• v.8 no.3 s.24
• /
• pp.57-62
• /
• 2004

This study is to assess the safety of the process facilities and fire fighting facilities for LNG storage tank which is the main facility in the LNG receiving terminal. The LNG storage tank(capacity : 140,000kl, type : aboveground, inner tank $9\%$ Ni steel plate, outer tank : prestressed concrete) was designed by foreign country up to now, but it has designed by domestic technology as the fifth in the world is under construction now.

• Journal of Welding and Joining
• /
• v.13 no.3
• /
• pp.18-33
• /
• 1995

천연가스는 지구상에서 비교적 광범위하게 생산되며 구미 등에서는 대부분 pipe line으로 소비지까지 운송하여 사용하고 있지만 일본 등에서는 액화 천연가스 (LNG)로 저장, 수송하여 사용하고 있다. LNG 저장탱크는 생산측의 액화기지와 사용측 의 수입기지에 설치되며 지금까지 약 240기가 건설되어 있다. 종래 탱크 1기의 용량 은 대부분 6 - 8만m$^{3}$ 규모였지만, 토지의 유효이용 등으로 대형화되고 있으며, 또 지상식에서는 PC(Prestressed Concrete)의 방파제를 외부탱크에 근접시켜 외부탱크 와 일체화시킨 PC LNG 탱크가 개발.설계되었다. 일본에서는 이미 이 방식으로 세계 최대규모인 14만m$^{3}$ 탱크가 건조되어 가동 중이다. LNG의 주성분은 메탄이고 비등점은 -161.5.deg.C로 극저온이다. 이러한 저온에서도 취화되지 않고 사용할 수 있는 재료는 9%Ni강, Al 합금, 스테인레스강 및 Invar 등이 있지만, 탱크의 대형화에 따라 가공성, 용접성 및 경제성을 고려하여 요즈음은 9%Ni강이 주로 사용되고 있다. 한편 9%Ni강용 용접재료는 고Ni계 합금 및 모재와 동일한 성분계의 공금계가 있지만 지금까지 고 Ni계 합급이 주로 사용되고 있다. 본 내용에서는 9%Ni강을 사용한 지상식 평지원통형 LNG 탱크를 예로 들어 탱크의 개요 및 용접재료, 용접시공 등을 포함한 용접기술에 대해서 개괄적으로 설명하고자 한다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.41 no.2
• /
• pp.94-99
• /
• 2004

전 세계적으로 천연가스의 수요가 급격하게 증가함에 따라 천연가스의 생산 및 공급이 활발하게 이루어지고 있고, 향후 10년 간 천연가스의 사용량이 현재의 2배 이상이 될 것이라는 추측도 나오고 있다. 이에 따라 천연가스 생산지에서는 천연가스 액화 플랜트(Liquefaction Plant)와 저장 탱크(LNG Storage Tank), 수입하는 곳에서는 재기화 플랜트(Regasification Plant)와 저장 탱크, 그리고 LNG를 운송할 LNG 운반선의 신조프로젝트가 활발하게 진행되고 있다. 미국의 경우 911테러와 NIMBY 사고의 확대로 인하여 LNG 수입기지의 육상건설을 주민들의 반대하자 해상에 건조하려는 경향을 보이고 있으며, 이에 따라 여러 가지 형태의 LNG Offshore 터미널이 설계되고 있다. 향후 LNG의 급격한 수입이 예상되는 나라로는 미국, 중국, 인도 등이 있으며 수출국으로는 카타르가 급격하게 부상하고 있다. (중략)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1543-1548
• /
• 2011

Structural analysis is performed to design anchor straps for a large-scale-liquefied-natural-gas (LNG) storage tank with corner protection and an inner tank by considering structural integrity. Anchor straps made of 9% nickel steel are attached to the inner tank, corner protection, and concrete raft to prevent the failure of the inner tank during both normal and emergency operating conditions. Two finite element (FE) models were analyzed in this study. One is a stand-alone model of the anchor strap, while the other is an extended model of the substructure of the anchor strap, inner tank, and corner protection. Three-dimensional shell elements are used to effectively assess the bending and axial behavior of structures. The Tresca stress values in each part of the two models are calculated for operation under five different load-condition cases: normal operation, leakage of the LNG, hydro test, and two earthquake conditions.

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.48-54
• /
• 2012

Building above-ground membrane LNG storage tanks have been recently actively reviewed because they have advantages in ease of large capacity, environmental friendliness, and low possibility of gas leakage of the inner tank (slow increase of leakage speed). In this paper, the safety of membrane LNG storage tanks was ensured through comparative risk assessment of full-containment LNG storage tanks and membrane LNG storage tanks by using Fault Tree Analysis (FTA). Risk assessment results showed that both types of tanks have very similar level of risk except for the membrane storage tanks without additional safety equipments (early model).

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.918-922
• /
• 2015

As international environmental regulations for pollutant and greenhouse gas emissions discharged from ships are being reinforced, it is drawing attention to use LNG as ship fuel. This paper compares the explosion risk potential in the LNG fuel gas supply systems of two types used in marine LNG fuelled vessels. By selecting 8500 TEU class container ships as target, LNG storage tank was designed and pressure conditions were assumed for the use of each fuel supply type. The leak hole sizes were divided into three categories, and the leak frequencies for each category were estimated. The sizes of the representative leak holes and release rates were estimated. The release rate and the leak frequency showed an inverse relationship. The pump type fuel gas supply system showed high leak frequency, and the pressure type fuel gas supply system showed high release rate. Computational fluid dynamics simulation was applied to perform a comparative analysis of the explosion risk potential of each fuel supply system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.10
• /
• pp.2797-2804
• /
• 1994

This paper analyzes the behaviors of corrugated membrane under the cryogenic liquid pressure and thermal loading using the FEM analysis program MARC. The FEM calculations were carried out on the basis of measured data of Technigaz membrane. It is very important to know the concentration levels and distributions of stress in the corrugated membrane. A quarter of the membrane sheet in place of the whole membrane was simulated because of its geometric symmetricity. The calculated results of the concentrated stress showed that the maximum stress occurs at the knot parts and at the root corner radius of the corrugations. The FEM calculated results indicated that the ring knot membrane which was developed in this study showed uniformly distributed stress and the lowest stress levels in the cross knot area in comparison with other two membranes. These results are very important to optimize the shape and improve the safety of membrane structure.

• Journal of the Korean Institute of Gas
• /
• v.2 no.3
• /
• pp.78-87
• /
• 1998

The mechanical properties, heat treatment and the history for the development of Ni-bearing ferritic steels for the application at low temperatures are reviewed. Ni-bearing ferritic steels are classified into $2-3\%$ Ni steels, $5.5\%$ Ni steel, $9\%$ Ni steel and $13\%$ Ni steel., of which $9\%$ Ni steels are most widely used for the large LNG storage tanks owing to their encellent fracture toughness up to $-196^{\circ}C$. The effect of retained austenite on the tensile properties and toughness was precisely discussed. As the size of LNG storage tank increases, thicker plates are needed. Thus, the recent efforts for the improvement of low temperature toughness and homogeneity are also introduced.

• Journal of the Korean Institute of Gas
• /
• v.2 no.1
• /
• pp.99-106
• /
• 1998

In order to investigate the impact properties of structural materials for LNG tank, instrumented Charpy impact tests were carried out at cryogenic temperatures. $9\%$ Ni steel showed a superior fracture resistance because of less degradation in toughness until 77 K. From the load-deflection curve obtained by an instrumented methods it was found that with the decrease of temperature from 173 K to 77 K, the peak load in the curve increased, but the total absorbed energy decreased. In addition, the energy absorbed during the crack growth was larger than one absorbed in the process of crack initiation. In SUS304L material, the energy absorbed in the process of the crack initiation was relatively large, but the energy absorbed in the process of crack growth was small, the behavior of absorbed energy was well agreed with the observations of the fracture surface which showed a relatively smooth fracture surface. The absorbed Charpy impact energy in the case of A5083 alloy was lower as compared with other steels, and some cracks were observed along the crack propagation direction at the fracture surface of 77 K.