• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.134-134
• /
• 2015

최근 액체 플라즈마에 대한 주된 이슈는 방전에 의해 발생하는 히드록실라디칼(OH-)과 버블이다. 액체 플라즈마를 이용한 다양한 응용분야에서는 히드록실라디칼에 주목하고 있다. 액체 플라즈마는 그래핀 파생물의 용액 친화도 향상을 위해 이용될 수 있다. 흑연이 포함된 과산화수소(H2O2) 용액에서 전기적인 방전으로 만들어진 히드록실라디칼로 그래핀 파생물의 용액 친화도를 향상시킨다. 이는 잠재적인 프린팅(printing) 기술 발전에 기대된다. 그리고 이 라디칼은 폐수에서 발암성의 트라이클로로아세트산(CCl3COOH)을 탈 염소하고 분해하는 역할을 하여 액체 플라즈마가 새로운 수처리 기술로 부상되고 있다. 또한 인체에서는 살균 작용을 하는 것 뿐만 아니라 단백질 고리를 끊는 역할을 하여 전립선 수술과 같은 인체수술에 적용될 수 있다. 최근 액체 플라즈마를 이용한 돼지 각막 임상수술에서 레이저와 필적할 정도로 매우 정밀하게 수술된 연구결과가 발표되어 인체 각막수술 적용에 기대된다. 이처럼 액체 플라즈마를 이용한 대부분의 응용분야에서 히드록실라디칼의 역할이 중요하다. 액체 플라즈마의 또 다른 이슈인 버블은 2가지의 역할을 한다. 첫 번째로 방전소스의 역할이다. 액체 속에 담긴 얇은 전극에 전압을 인가하면 전극 주변에서 강한 전기장의 발생으로 줄열(joule heating)에 의해 버블이 생성된다. 전극에서 버블이 생성되었을 때, 서로 다른 유전율을 가진 두 물질로 나누어진다. (버블 안은 공기로 상대 유전율 ${\varepsilon}r{\fallingdotseq}=1$, 용액은 ${\varepsilon}r{\fallingdotseq}=80$이다.) 시스템에 인가된 전압이 항복 전압(breakdown voltage)을 넘어서면 유전율이 상대적으로 낮은 버블내부에 강한 전기장이 걸리게 되어 방전이 일어난다. 만약 버블이 존재하지 않는다면 방전을 위해서 매우 높은 전압이 필요하다. 따라서 버블은 플라즈마 방전의 소스역할을 한다. 두번째로 버블은 전극의 부식을 방지하는 역할을 한다. 전극 부식은 주로 전기분해로 인한 산화반응에 의해 발생하는데 버블을 전극에 오래 머무르게 하면 부식을 방지할 수 있다. 이처럼 액체 플라즈마 시스템에서 버블의 역할들은 상당히 중요하다. 일반적으로 버블은 시스템에 인가하는 전원, 전극 극성 그리고 전압크기에 따라 거동이 달라진다. 시스템에 AC파워를 인가하면 버블은 주파수가 높을수록 전극에서 떨어지는 속도가 빨라지는 특성을 보인다. 핀 전극 극성이 음극일 때는 양극일 때보다 버블이 더 잘 생성된다. 또한 인가전압크기에 따라 거동이 달라지며 시스템에 같은 전압을 인가하여도 크기가 항상 같지 않고, 거동도 일관성을 보이지 않은 랜덤적인 모습을 보인다. 본 연구에서는 이 랜덤적인 버블의 거동을 정리하고 응용분야에서 중요하게 여기는 히드록실라디칼 생성에 대해 공부하기 위해 염류 용액(saline solution)에 핀(pin)-면(plane) 전극 구조를 설치하여 10Hz 주파수(1% duty cycle)를 가진 0-600V 구형펄스로 실험하였다. 실험을 통한 결과로서 랜덤적인 버블의 거동을 전극에서 버블이 떨어지는 속도와 플라즈마 특성에 따라 슈팅모드(shooting mode)와 유지모드(keeping mode) 2가지 모드로 분류하였다. 슈팅모드에서는 버블이 핀 전극에서 성장하지 못하고 빠른 속도로 떨어지는 모드로 플라즈마 방전이 잘 이루어지지 않는다. 반면 유지모드에서는 버블이 핀 전극에서 떨어지지 않고 지속적으로 성장한다. 이 모드에서는 펄스 시간 동안 하나의 버블로 연속적인 방전이 가능하다. 방전이 일어날 때 발생하는 히드록실라디칼의 생성은 버블 내부의 쉬스와 관련이 있다. 이 라디칼을 만들기 위해서는 높은 에너지가 요구되기 때문에 버블 내부의 쉬스(sheath)에서 만들어진다. 펄스 동안 쉬스는 주로 핀 전극 주변에서 유지되며 히드록실라디칼은 이곳에서 주로 만들어진다. 따라서 버블과 함께 쉬스도 성장하는 버블유지모드에서 슈팅모드보다 히드록실라디칼이 더 많이 생성된다.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.55-63
• /
• 2020

In order to investigate the separation of Co(II) and Ni(II) by ionic liquids from weak hydrochloric acid solutions, extraction experiments were performed by changing the type and concentration of ionic liquids and the initial pH of the aqueous phase. Two kinds of ionic liquids based on Aliquat 336 were employed in this work; one was synthesized by reacting organophosphorus acids(D2EHPA, PC88A, Cyanex 272, Cyanex 301) with Aliquat 336 and the other was prepared by exchanging the chloride ion of Aliquat 336 with SCN^-. The three types of ionic liquids (ALi-D2, ALi-PC, and ALi-CY272) showed better extraction of Co(II) than Ni(II), and the equilibrium pH was higher than the initial pH. In the case of ALi-CY301, the selectivity of Co(II) and Ni(II) depended on the extraction conditions. In addition, the effect of the addition of TBP to the ionic liquid on the extraction of two metals was also investigated. Employment of ALi-SCN as an extractant resulted in selective extraction of Co(II) and complete separation of the two metal ions was possible.

• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.259-271
• /
• 2008

The analytical method of extracting compounds from human blood to examine accumulated organochlorine pesticides (OCPs) has been widely used the traditional liquid-liquid extraction (LLE) method and solid-phase extraction (SPE) method, yet these methods have certain limitations in purification and usafe of a large amount of sample. In order to overcome the se problems reside in these, solid-phase microextraction (SPME), known as a highly efficient extration method with less samples and relatively simple, was employed to collect 18 different kinds of OCPs in blood as extraction method in this study. To optimize extraction method, we examine various experimental SPME-parameters such as adsorption (fiber type, adsorption time, adsorption temperature, salting out effect), and desorption (desorption time, desorption temperature etc.). From the experimental results, the optimal conditions are as follows: fiber was polyacrylate with $85{\mu}m$, adsorption time was for 5 min, adsorption optimum temperature was at $280^{\circ}C$, and salting out effect was NaCl with 0.1 g. MDL, precision and accuracy was in the ranges of 0.05~0.20 ng/mL, 5.59~13.39%, respedively, and accuracy was -0.5% ~24.5% for all OCPs.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.6
• /
• pp.53-59
• /
• 2007

Optimal quenching curves have been studied for the accurate analysis of $^{14}C$ in groundwater polluted by reducing efficiency of volatile organic compounds (VOCs) in liquid scintillation counter (LSC). The quenching parameters (SQP(E)) were measured for ten VOCs such as benzene, toluene, ethylbenzene, o-(m-,p-)xylene, trichloroethylene (TCE), tetrachloroethylene(PCE), carbon tetrachloride and chloroform. The quenching curves were plotted using $^{14}C$ standard solution and chloroform as a quenching agent. Optimal plotting conditions were determined for standard solution, LSC measuring time and the concentration of chloroform. The quenching effects of chlorinated organic compounds such as TCE, PCE, carbon tetrachloride and chloroform were greater than those of BTEX (benzene, toluene, ethylbenzene and xylene). Optimum measuring time was 100 minutes far 7,000 dpm/mL standard solution. A few mL of chloroform should be added for good quenching curves. These quenching curves have good correlation coefficients (> 0.99) and the curves could be applied to accurate analysis of $^{14}C$ in groundwater and tap water.

• The Safety technology
• /
• no.190
• /
• pp.24-26
• /
• 2013

최근 화학물질 안전사고가 잇따라 발생하면서 사업장 내 안전제품을 구비하고 안전한 작업환경을 조성하려는 움직임이 확산되고 있다. (주)유민에쓰티(대표 유흥근)는 이러한 화학물질 안전사고를 예방하기 위해 불산, 염소 등의 화학약품 유출을 감지하는 센서장치를 생산하는 곳이다. 이곳은 누수감지센서를 비롯해 스팀검출센서, 옥외용 강산 검출센서, 유기성액체 검출센서 등을 개발하면서 산업안전제품시장에서 무서운 신장세를 드러내고 있다. 특히 지난 2008년에는 인쇄전자 기반의 필름형 누수감지센서를 세계 최초로 개발해 국무총리상을 수상하면서 우수한 기술력을 자랑하기도 했다. 또한 국내외 약 50여 건에 이르는 특허 획득을 통해 품질을 인증받았으며, 미국전기전자공학회(IEEE)에 소개되는 등 해외에서도 기술력을 인정받고 있다. 이처럼 (주)유민에쓰티는 끊임없는 기술 개발로 안전한 작업현장을 조성하는 데 이바지하고 있다. 하지만 유민에스티의 모든 관계자들은 사업장 내 안전이 먼저 확보됐었기에 이 같은 성장이 가능했다고 입을 모아 말한다. 제조업 특성상 안전사고 발생률이 높은데도 불구하고 2003년 설립된 이후 단 한 건의 안전사고와 산재가 발생하지 않았을 만큼 철저한 안전관리를 전개하고 있는 것이다. 안전을 바탕으로 눈부신 성장을 하고 있는 (주)유민에쓰티를 찾아가봤다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.47-51
• /
• 2000

2,4,5-trichlorophenoxyacetic acid (2,4,5-T)-degrading bacterial strains were isolated from rice field and field in suburbs of Taejon. Of the total 100 isolates, 19 strains were selected by fast growth on solid minimal media containing 2,4,5-T as a sole of carbon and energy, and they were identified to genus level. 11 strains were identified as Pseudomonas, 4 strains as Acinetobacter, 1 strains were as Alcaliagenes and 3 strains were not identified. Strains MU19 and MU92 which were identified as Pseudomonas were capable of degradation for 4 kinds of chlorinated aromatic hydrocarbons, 2,4-D, 2,4,5-T, MCPA and 3CB. Acinetobacter sp. MU38 showed the highest degradability in liquid minimal media at 48 hours after inoculation, and Pseudomonas spp. MU19. MU57, MU73, and MU92 were able to degrade carbon source at higher rates. As the results Acinetobacter sp. MU38 and Pseudomonas spp. MU19 and MU92 were capable of biodegradation for broad range of halogenated aromatic hydrocarbons, and had higher rates of degradation for 2,4,5-T.

• Nuclear Engineering and Technology
• /
• v.5 no.3
• /
• pp.202-213
• /
• 1973

In a continuation of the 1st series of these studies, a separation of the components in organic phases obtained from Szilard Chalmer reactions of aromatic chloro derivatives was attempted to clarify the conditions of isolating the main component. Though it was unable to isolate all constituents of organic phases, the main component was well isolated by means of a simple distillation or a thin layer chromatography. It was identified that the main component was a recombined product of the recoiled $^{38}$ Cl atom with the original sample. In cases of solid samples the main component amounted about 80-60% of the radio activity of the organic phase, whereas the main component from liquid samples gave less than 70% of the radio activity of the organic phase. A prolonged irradiation could increase the yield of a main component, but it was, in case of a radiation senintive compound, decreased as the irradiation is extended. The number of aide produets separated from an organic phase of a liquid sample was greater than that of a solid sample, and hence the main component of a solid sample was isolated easier. The overall fields of the labelled main products of 22 kinds of compounds were listed and a procedure of the separation of the main component by a thin layer chromatograply was proposed and evaluated. The feasibility of the present procedure for labelling purpose was also reviewed with respects to the chemical structure of a compound.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.4
• /
• pp.261-265
• /
• 2000

To develope the enhanced bacterial strains capable of biodegradation for various chlorinated aromatic compounds, 100 bacterial strains were isolated from soil samples of suburbs of Taejon, Cheongju, and Jeonju by the enrichment culture. These strains can degrade pentachlorophenol (PCP) which is a kind of wood preservatives. Nineteen strains of the isolates were selected by fast colony-forming rate on solid minimal media containing PCP as an only source of carbon and energy. These strains were identified to genus level. Fifteen strains were identified as Pseudomonas, 1 strain as Acinetobacter and 3 strains were not. Genus Alcaligenes strains were not found among them. Pseudomonas sp. MU135. MU139, MU163 and MU 184 were able to degrade for 4 kinds of chlorinated compounds, PCP, 2,4-D, MCPA and 3CB. Pseudomonas sp. If was observed that MU139 exhibits the highest degradability in liquid minimal media at 72 hours after inoculation. Pseudomoans sp. MU147, MU177, MU184 and MU192 also degraded the compounds at higher rates. As the results, Pseudomonas sp. MU139 and unidentified strain MU184 had biodegrability for broad range of chlorinated compounds and higher rates of degradation for PCP.

• The Journal of Engineering Geology
• /
• v.3 no.2
• /
• pp.203-214
• /
• 1993

Underground Injection Control regulations for Class I injection wells require that the vertical dufusion be considered as a mechanism for transport of contaninants in evaluating containment Due to the low permeability in the confining aquitard, the movement of contaminants over the long term is controlled by the molecular diffusion. The movement can be predicted, using the Fick' S second law of diffusion. The diffusion coefficient in Fick' s law has been determined experimentally in this study. Instantaneous injection of $^{51}Cr$ was used to trace the distribution of Cr(VI) in soil plugs and an analytical solution was applied to calculate the diffusion coefficients. This study shows the effect of environmental factors, such as temperature, chloride concentration, applied amount of $^{51}Cr$, and bulk density of injection formations on diffusion of Cr(VI)

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.790-795
• /
• 1997

Polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofuransfurans are the archetype of toxic chemicals. So it has absorbed public attention. The majors primary sources of PCDDS and PCDFs are chemical, thermal and photochemical reactions. Municipal solid waste incinerator facilities has been reported as the major contributors of dioxins to the environment. In this paper, Dioxins and furans were examined emission gas and fly ash produced during combustion in municipal solid waste incinerator. More effective method for sampling, extraction was described. The sample was extracted using a soxhlet method and purified using silicagel, alumina and carbon fibre HPLC to remove interfering compound. The extract was then analyzed by HRGC/HRMS. The result of this study showed recovery standard was good and the data resembled those of thermal processes. Total dioxins and furans were $1076.20pg/Nm^3$ and $1452.34pg/Nm^3$ respectively. The amount of highly chlorinated compound was more than that of lowly chlorinated compound. The 2,3,7,8-substituted TCDD was Just 0.34% of the total dioxins/furans amount.