• 상하수도학회지
• /
• 제29권6호
• /
• pp.685-692
• /
• 2015

The concern over the risk of environmental exposure to brominated phenols has been increased and has led the researchers to focus their attention on the study of bromophenol treatment. In this study, the effects of pH and ferrate(VI) dose on the degradation of 2-bromophenol were investigated. The results indicated that the oxidation of 2-bromophenol by liquid ferrate(VI) was found to be highly sensitive to the pH condition. Furthermore, the highest removal efficiency was observed at the neutral condition with the removal efficiency of 94.2%. In addition, experimental results showed that 2-bromophenol removal efficiency increased with increasing of ferrate dosage. Ferrate(VI) dose of 0.23 mM was sufficient to remove most of the 2-bromophenol with the efficiency of 99.73% and kapp value of $2982M^{-1}s^{-1}$. Seven compounds were identified as the intermediate products by the GC/MS analysis.

• 상하수도학회지
• /
• 제32권2호
• /
• pp.123-130
• /
• 2018

This paper provided the information related to the removal of 2,4,6-tribromophenol using in-situ and stable liquid ferrates(VI). This research's goal was to observe the differences of oxidation power between in-situ liquid ferrate(VI) and stable liquid ferrate(VI). The in-situ liquid ferrate(VI) ($FeO_4{^{2-}}$) has been successfully produced with the concentration 42,000 ppm (Fe) after 11 minutes of reaction time. The stable liquid ferrate(VI) was also successfully produced following the modification method by Sharma with the produced concentrations 7,000 ppm. The stable liquid ferrate(VI) was stable for 44 days and slightly decreased afterwards. This research has been carried out using 2,4,6-tribromophenol as the representative compound. Both of ferrates(VI) have the highest oxidation capability at the neutral condition. Furthermore, the stable liquid ferrate(VI) has higher oxidation power than the in-situ liquid ferrate(VI).

• 상하수도학회지
• /
• 제32권1호
• /
• pp.27-35
• /
• 2018

The stability of liquid ferrate(VI) produced by an innovative method was confirmed and the degradation characteristics of cyclic compounds(Benzene, Aniline, Toluene, 1,4-Dioxane) by liquid ferrate(VI) were investigated under the same reaction conditions. When it was compared with the ferrate manufactured by the wet oxidation method, the liquid ferrate was more stable. And the stability of liquid ferrate was tested at the storage temperature. As a result, only 17.7% of liquid ferrate(VI) has decomposed at the storage temperature($4^{\circ}C$) for 28 days. Among the cyclic compounds, the aniline was rapidly degraded compare to other cyclic compounds, which seems to be due to the electron-donating ability of the substituent, $-NH_2$ group. Especially, when 1,4-dioxane was compared with benzene, the decomposition rate of 1,4-dioxane was lower than that of benzene, suggesting that oxygen atoms hinder the electrophilic reaction. Among 4 cyclic compounds, it was observed that aniline has the highest rate constant than those of other cyclic compounds.

• 상하수도학회지
• /
• 제36권3호
• /
• pp.167-175
• /
• 2022

수용액에서 EBT의 분해는 pH, Ferrate (VI) 투입량, 초기 농도, 수용액 온도 등 다양한 변수의 조건에서 연구되었다. 최대 분해 효율은 pH 7.0에서 95.42%가 달성되었으며, 이 실험 조건에서 얻은 kapp 값은 872.87 M^-1s^-1 이었다. EBT 분해율은 Ferrate (VI)의 투입량이 증가함에 따라 증가하였으며 EBT 초기 농도가 감소함에 따라 EBT 분해의 초기 속도 상수가 증가하였다. 또한 EBT의 분해율은 온도가 10℃에서 45℃에 도달할 때까지 수용액의 온도에 따라 증가하였으며 이 실험조건에서 활성화 에너지 값은 EBT 분해에 대해 11.9 kJ/mol의 값이 도출되었다. 따라서 분해 실험의 결과는 Ferrate (VI)가 수용액상에서 EBT를 효과적으로 분해시킬 수 있음을 보여주고 있다.

• 대한환경공학회지
• /
• 제37권12호
• /
• pp.705-711
• /
• 2015

습식산화법으로 합성한 Ferrate(VI)를 적용하여 2,6-Dichlorophenol의 분해 연구를 하였다. 최적의 분해 조건을 찾기 위해 영향인자로 pH(산성, 염기성, 중성), DCP의 초기 농도, ferrate 주입 농도, 수용액의 온도를 두어 실험하였다. Ferrate(VI)는 강력한 산화력과 선택성이 있으며, 무해한 최종산물인 Fe(III)을 만들어 유용한 성질을 가지고 있다. Ferrate 이온은 산성과 중성 조건에서 재빠르게 Fe(III)으로 환원한다. 본 실험 결과로 DCP의 분해율은 산성과 염기성 조건보다 중성 조건에서 좋은 것으로 나타났다. ferrate 주입 농도와 DCP의 초기 농도에 따라 영향을 강하게 받는다. ferrate의 주입 농도가 증가할수록 또한 DCP의 초기 농도가 감소할수록 DCP의 분해율이 좋게 나타났다. 수용액의 온도는 10, 25, 35, $50^{\circ}C$에서 실험을 진행하였다. 최적의 조건은 $25^{\circ}C$로 나타났으며, $25^{\circ}C$에서 $50^{\circ}C$까지의 범위에서는 증가할수록 효율이 감소하는 것으로 나타났다. DCP의 중간생성물 연구는 GC/MS를 통해 실험하였다.