• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.11
• /
• pp.222-226
• /
• 1995

인공심장에서의 박출량제어는 전부하에 따른 심박출균형, 심실내 완전충만과 완전구출을 구현하는데 그 목적이 있다. 본 논문에서는 인공심장 내부의 심실간 공간 압력파형을 심박출량의 제어에 활용하였다. 이를 위해서는 심실간 공간의 압력파형을 심실 유입부와 유출부의 혈류량에 대한 정보, 이동작동기의 위치신호와 동기시켜 해석하는 것이 필요하다. 이러한 압력파형의 해석을 바탕으로, 심실간 공간의 음압 크기로 좌,우 심방압을 추정하고 작동기의 좌,우 수축기때 심실간 공간의 음압크기를 비슷하게 유지하도록 작동거리를 제어하면 좌우 심박출 균형을 이룰 수 있음을 확인하였다. 또한, 심실의 완전충만과 완전구출의 실현을 위한 심실 충만 정도를 추정할 수 있게 하는 인자를 제시하였다.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.10
• /
• pp.67-79
• /
• 2016

Waveform micropile is an advanced construction method that combined the concept of conventional micropile with jet grouting method. This new form of micropile was developed to improve frictional resistance, which consequently leads to achieving higher bearing capacity and cost efficiency. Two field tests were conducted to examine the field applicability as well as to verify the effects of bearing capacity enhancement. In particular, waveform micropile construction using jet grouting method was performed to evaluate the viability of waveform micropile installation. After testing, the surrounding ground was excavated to check the accomplishment on the shape of waveform micropile. The result showed that waveform micropile can be installed by adjusting the grouting time and pressure. In the loading tests, waveform micropile's bearing capacity increased by 1.4 to 2.3 times depending on their shapes when compared with conventional micropile. Overall results clearly demonstrated that waveform micropile is an enhanced construction method that can improve bearing capacity.

• Geophysics and Geophysical Exploration
• /
• v.23 no.1
• /
• pp.38-49
• /
• 2020

Full-waveform inversion (FWI) is an optimization process of fitting observed and modeled data to reconstruct high-resolution subsurface physical models. In acoustic FWI (AFWI), pressure data acquired using a marine streamer has mainly been used to reconstruct the subsurface P-wave velocity models. With recent advances in marine seismic-acquisition techniques, acquiring multi-component data in marine environments have become increasingly common. Thus, AFWI strategies must be developed to effectively use marine multi-component data. Herein, we proposed an AFWI strategy using horizontal and vertical particle-acceleration data. By analyzing the modeled acoustic data and conducting sensitivity kernel analysis, we first investigated the characteristics of each data component using AFWI. Common-shot gathers show that direct, diving, and reflection waves appearing in the pressure data are separated in each component of the particle-acceleration data. Sensitivity kernel analyses show that the horizontal particle-acceleration wavefields typically contribute to the recovery of the long-wavelength structures in the shallow part of the model, and the vertical particle-acceleration wavefields are generally required to reconstruct long- and short-wavelength structures in the deep parts and over the whole area of a given model. Finally, we present a sequential-inversion strategy for using the particle-acceleration wavefields. We believe that this approach can be used to reconstruct a reasonable P-wave velocity model, even when the pressure data is not available.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2088-2090
• /
• 2005

산업현장에서 많이 사용되고 있는 전력기기에 결함이 발생하면 치명적인 사고로 진전되어 경제적, 인적 손실이 발생될 수 있다. 본 논문은 현재 대전력기기에서 많이 사용되는 $SF_6$ 절연가스의 압력 변화에 따른 부분방전을 모의하고, UHF법을 이용한 모의 GIS 내부 부분방전 신호 측정 및 접지전류를 측정하여 부분방전 시 방사되는 방사전자파의 스펙트럼 특성과 접지 전류 파형 특성을 분석하여, 챔버 내의 압력변화가 $SF_6$ 가스 부분방전에 미치는 영향을 측정하였다. 이러한 연구는 현장 GIS 및 $SF_6$가스 절연 전력설비에서 내부 압력 변화가 원인이 되어 발생되는 절연파괴 사고의 방지에 중요한 역할을 할 것으로 사료된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.947-952
• /
• 2010

Components such as pressure vessel, hydraulic hose assembly, accumulator, hydraulic cylinder, hydraulic valve, pipe, etc., are tested under the impulse-pressure conditions prescribed in ISO and SAE standards. The impulse pressure test machine needs to have a high pressure, a precise control system and a long life. It should satisfy the requirements for fabrication of the impulse tester to generate ultra high pressure in the hydraulic system. In the impulse tester, a servo-valve control system is adopted; although the control application is convenient, it is expensive owing to the cost of developing the system. The type of the control system determines the pressure wave, which affects the components that are tested. In this study, the manufacturing process and the intensifier system design related to the flow, pressure, and the increasing rate of pressure are investigated. The results indicate the ultra high pressure waves in the system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.466-466
• /
• 2010

유도결합형플라즈마(ICP)에서 부유 랑뮤어 탐침에 정현파, 톱니파, 사각파, 삼각파 형태의 전압 파형들을 쉬스에 인가하였을 때, 탐침으로 들어오는 고조파전류들의 특성을 넓은 범위에서 연구 하였다. 탐침으로 들어오는 플라즈마전류파형 및 기생전류파형의 모양과 고조파전류들에 대해 고찰하였고, 각각의 전압파형을 인가하였을 때 다양한 압력과 파워조건에서 부유 랑뮤어 탐침법을 이용하여 전자온도와 플라즈마 밀도를 측정하고, 측정결과는 싱글 랑뮤어 탐침법과 비교하였다. 정현파, 삼각파는 싱글 랑뮤어 탐침법과 잘 일치하는 결과를 보였고, 톱니파는 실험상의 오차로 정확한 측정이 안 되었으며, 사각파는 전류파형의 과도현상으로 인해 측정이 안되었다. 그 외에 기존의 부유 랑뮤어 탐침법과 다르게 부유전위의 변화와 제 1 고조파들의 비를 이용해서 전자온도를 구하는 방법도 소개한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.93-100
• /
• 2017

Four-stroke cycles in an automobile engine are suction stroke, compression stroke, combustion stroke and exhaustion stroke. A normal operation of engine in compression and power stroke must be processed in optimal fuel-air pressure. In this paper we describe a development of measuring equipment for engine cylinder pressure with observing supply current to self motor(start motor). By comparing the current wave on pressure of the 4 or 6 cylinder in engine, a abnormal cylinder state will be found. The validity of the proposed measuring equipment was shown by experiment for real automobile.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.14.2-14.2
• /
• 2009

잉크젯의 응용이 넓어 짐에 잉크젯 헤드에서의 잉크 토출을 효과적으로 제어해야되는 이슈가 대두 되고 있다. 이를 위해서는 잉크젯 헤드의 입력전압을 적절하게 인가 해야만 한다. 본 연구에서는 잉크젯 토출 현상을 이해하고 이를 통해 잉크젯 헤드의 최적의 입력 파형을 설계가 가능한 알고리즘을 소개 하려고 한다. 본 연구에서는 토출 현상을 측정하기 위하여 CCD 카메라의 이미지를 사용한 메니스커스 운동을 측정하였다. 측정된 메니스커스 운동은 잉크젯 헤드의 피에조에 인가되는 입력전압에 의해서 야기된 압력파가 노즐에 전달되어 나타나는 현상이다. 따라서 잉크젯 헤드내의 현상 뿐만 아니라 잉크젯 토출 현상의 많은 정보를 가지고 있다. 파형 설계를 위해서 메니스커스 운동의 주기를 측정하여 잉크젯 입력 파형의 최적의 휴지시간 (dwell time)을 결정하는것이 가능하였음을 실험적으로 검증하였다. 또한 메니스커스 운동을 측정 함으로서 설계된 파형을 평가하것도 용이함을 실험적으로 보였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4_1
• /
• pp.129-136
• /
• 1992

A precedure for recovering surface displacement from a time series of pressure measured by a pressure gage in a shallow water (that is, FFTM, LCM. IWM) is investigated with respect to a proper cut-off-frequency of a frequency response function for the accurate recovery of wave height and period. The authors examined the applicability of above mentioned three transformation procedures through field observations and laboratory experiments and the following results are obtained. i) The cut-off-frequency of the frequency response function used in FFTM is deeply depend on both the frequency response of the pressure sensor and the water depth at the sensor. In this study, a relatively accurate surface displacement can be recovered when the frequency response function is cut off at the frequency corresponding to kh=3.0 where k is a wave number at the depth of h. The frequency response function in the region higher than the cut-off-frequency is set constant to be the value at the cut-off-frequency. ii) The transformed surface displacements by LCM are affected by the small waves of short periods included in the measured pressure. It is found that pressure variation whose local frequency is higher than kh=1.5 has to be neglected to recover surface displacement sufficiently. iii) In IWM, the linear pressure response function is usually utilized by multiplying a coefficient N which is a function of the frequency (or kh) and takes a value around unity. However, in this study, a constant value of N(=1.0) gives a relatively accurate recovery of surface displacements.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.5
• /
• pp.491-502
• /
• 1997

This paper describes a theoretical and exprimental investigation of the pressure - time histories of some basic internal combustion engine exhaust systems. The program package is utilized the method of characteristics to solve the general equations of one - dimensional unsteady gas flow. This analysis is then combined with boundary models, based on quasi - steady flow approach, to give a complete treatment of the flow behavior in the exhaust system. Using a rotary valve exhaust simulator, experimental pressure - time histories were obtained. The predictions are com¬pared with measured results and show a high degree of correlation in amplitude and phasing.