• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.3
• /
• pp.19-27
• /
• 2001

In this seismic analyses of structures, it is well recognized that the effects of soil-structure interaction can not be ignored and seismic responses of a structure taking into account the stiffnesses of a foundation-soil system show the significant difference from those with a rigid base. However, current seismic analyses of apartment building structures were carried out with the rigid base ignoring the characteristics of the foundation and the properties of the underlying soil. In this study, seismic analyses of wall-slob type apartment buildings which have a particular structural type were carried out taking into account the soft soil layer comparing seismic response spectra of a flexible base with those of a rigid base and UBC-97. Low-rise or middle height wall-slab type apartment buildings built on the deep soft soil layer showed a rigid body motion with the reduced seismic responses due to the base isolation effect, indicating that it is considerably safe but uneconomical to utilize the design spectra of UB-97 for the seismic design of wall-slab type apartment buildings due to conservative design.

• Tunnel and Underground Space
• /
• v.14 no.1
• /
• pp.43-53
• /
• 2004

In this study, scaled-model tests were performed to investigate the effect of underground openings on the stability of surface structure around the abandoned coal mine areas. Four types of test models which had respectively different depths of openings and different ground reinforcement conditions were introduced, where the modelling materials were the mixture of sand, plaster and water. The model with deep openings were turned out more stable to the structure than the model with shallow ones, because the crack-initiating pressure of the former was 2.5 times as much as that of the latter. The models with ground reinforcement were also fumed out more stable than the model without reinforcement, because the crack-initiating pressure of the former was 2.4 times as much as that of the latter. Subsidence profiles were analysed to find the characteristics of slope and curvature, and the model with large reinforcement were turned out the most stable.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.6
• /
• pp.549-557
• /
• 2017

In order to improve the productivity in the civil engineering field, efforts to apply BIM have been continuing, however, research on information modeling of tunnel structures considering alignment is insufficient. In this study, we proposed the method of building tunnel models reflecting curved alignment by transferring point data to BIM Authoring Tools(BAT) through discretization of alignment in Alignment-centered Modeling Tools(AMT). IFC data schema was derived to consider the physical and spatial elements of tunnel structures and alignment and IFC-based information management for tunnel alignment, tunnel structures and ground conditions was possible by referring to the extended data schema and including meanings in IFC property sets. The ratings for ground condition in Rock Mass Rating(RMR) and Q-system was automatically derived by using generated information model according to the proposed method.

• Explosives and Blasting
• /
• v.22 no.1
• /
• pp.75-80
• /
• 2004

최근 도심지의 가속화에 따라 시가지 인근에서의 암반굴착이 활성화되고 있으며, 특히 보안을 요하는 구조물에 근접한 발과 또는 가동중의 설비 가까이 에서 발파굴착을 실시해야하는 등 주변환경을 충분히 고려하여 진동, 소음 및 비산을 효과적으로 제어할 수 있는 발파기술이 요구되고 있다. 이와 같은 배경에서 미진동 발파굴착을 위하여 콘크리트 파쇄기, 팽창성 파쇄제 등이 개발되어 실용화되고 있다. 국내에서는 (주)한화가 콘크리트 파쇄기(Finecker)를 개발하여 공급해 왔으며, (주)고려 노벨 화약에서는 저폭속(2,000 m/s) 화약을 2중의 Air Gap을 이용하여 진동 및 소음 제어하는 미진동 발파용 화약(Kinecker)을 출시하여 공급하고 있다. 이에 Kinecker의 원리와 특징 그리고 현장적용 사례 및 발파패턴을 소개하고자 한다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.605-614
• /
• 2010

In this paper, the initial behavior of transmission tower was analyzed. This tower was firstly constructed by rock anchor foundation in domestic 154 kV transmission line and wireless real-time monitoring system was installed to obtain the measured data for analysis of the structure behavior. For this purpose, 16 strain gauges was installed in anchors of foundation and strain gauges, clinometers, anemoscope and settlement sensors was installed at superstructure. As the results, the main factor which influence the behavior of superstructure is wind velocity, wind direction, rainfall and temperature change. Especially, the uplift load at stub of transmission structure revealed about 35.4 percentages of design load. Hereafter the long term stability will be analyzed.

• Tunnel and Underground Space
• /
• v.4 no.3
• /
• pp.287-296
• /
• 1994

Safety-related structures of power plants have to be protected against the effects of possible hazards and natural phenomena. Earthquakes are considered a major dynamic design loading as a requirement of plant design, but the effects of blast-induced vibratons are not. Due to the difficulties of obtaining construction site for new plants, following ones are inevitably being built in the site adjacent to existing power plants. Therefore considerable thought has been recently given to the dynamic loading generated by blasting works near the plants. In this paper, discussed is applicability of existing vibration standards and industrial codes to the blasting works near safety related structures. Also evaluated are the parameters for the safe vibration limits such as measure of vibration level, frequency consideration, structure response, propagation equation, etc.

• Tunnel and Underground Space
• /
• v.4 no.1
• /
• pp.63-76
• /
• 1994

This paper discusses contents of the existing design, the behaviours prediction on the strut and retaining wall around subsurfaces, and also evaluates the measured results in comparison with the management criterion during excavation period of ventilation shaft at Pusan-Subway 220. Field measurements showed that maximum displacement 23.74 mm at boundary site of multistratification and the weathered rock to be formed at 0.2~0.6 H of total excavating depth(H), 68 ton of maximum axial force and 4.4X102 kg/cm2 of stress on strut. The measured axial force exceeds prediction levels by up to 50 percent at the weathered soil & rock, and the others come under the category of their levels. The great gap of both field measurements and prediction on behaviour makes a difference of the site situation at the design stage and the practical working. This measured value is greatly safety in comparison with that of the safety criterion, but axial force at 4~5 strut of ventilation shaft l is higher than the prediction.

• Tunnel and Underground Space
• /
• v.15 no.5 s.58
• /
• pp.352-358
• /
• 2005

For non-destructive testing of concrete structures, time and frequency domain method were applied to detect cavity in underground model and pier model. To interpret the measured data, time domain method made use of tomography which was completed with first arrivaltime and inversion method. In this steady, frequency domain method using Fourier transform was tried. Maximum frequency in the frequency domain was analyzed to calculate location of cavity.

• Journal of KSNVE
• /
• v.3 no.4
• /
• pp.300-312
• /
• 1993

폭약은 탄광에서 석탄이나 각종 광물을 캐거나, 건축토목 현장에서 암반제거 를 위해서 주로 사용되었다. 전쟁에서 군사용으로 파괴를 위한 목적으로 사용되기도 하였으나 최근의 동서화해 분위기와 남북통일이 무르익는 시대적 추세를 볼때 더 이상 파괴용으로의 사용은 억제될 것이고 이제는 평화를 위하여 건설을 위하여 산업 발전을 위하여 더많이 사용되어지고 응용될 것이다. 작금의 첨단산업의 발달과 산업 의 고도화로 우리 화약업계에도 최근에는 첨단발파기술의 개발에 많은 관심과 연구 개발을 진행 중이다. 첨단발파기술의 응용사례를 소개하면, 건축토목분야에서 노후 고층 빌딩 및 굴뚝의 철거, 노후교량 및 공장시설의 철거 등에 활용되고 있으며, 위락 서비스분야에서 응용으로는 불꽃놀이를 들 수 있다. 최근에는 첨단과학장비를 이용하여 각종 꽃불의 모양이 음악과 미술등 예술적인 기능을 기억시킨 케비테이션 를 활용하여 보다 고차원의 고예술품을 만들어낸다. 아울러 각종 기공식 발파시에도 예술적 기능과 웅장함을 가미하여 그 화려함을 극치에 다다르게한다. 그외에도 로켓 발사추진제등의 우주개발에의 응용, 석유시추등 해양개발에의 응용, 각종 공학실험 연구에의 응용, 폭발가공에의 응용, 의학에의 응용, 철강산업에의 응용 등으로 그 숫자를 이제는 일일이 나열하기가 힘들 정도로 광범위 해졌다.

• Explosives and Blasting
• /
• v.19 no.2
• /
• pp.19-26
• /
• 2001

국토의 효율적 활용을 위한 각종 토목.건설공사나 석재 및 골재생산 등을 위해 암반을 굴착함에 있어 다양한 산업용 화약류가 이용되고 있다. 그러나 화약의 사용으로 인해 수반되는 발파진동은 인체 및 구조물 등에 피해를 발생시켜 인근의 주민과 마찰을 일으키고 있다.본 연구에서는 발파진동속도 data를 취합하여 분석 사용함에 있어서 V, T, L 성분의 최대 실벡터합을 사용하는 경우와 최대 벡터합을 사용하는 경우를 비교하여 실제 현장 기험시 적용성을 높이고자 하였다. 진동속도는 최대 실 벡터합에 비해 최대 벡터합에 의해 구해진 진동속도의 크기가 장승근에서는 24.6%, 삼승근에서는 26.1%가 증가하는 것으로 나타났으며, 단일성분의 최대치, 최대 실벡터합, 최대 벡터합의 안전율은 1 : 1.154 : 1.359로 나타났다