• Journal of the Korean Ceramic Society
• /
• v.48 no.3
• /
• pp.222-227
• /
• 2011

The hexavalent chromium ions in wastewater are highly toxic chemicals even at low concentrations. It causes serious diseases, such as cancer, skin disease, digestive trouble et. al. In this study, $Cr^{6+}$ ions were removed by using borosilicate glasses. Various glasses system with different compositions were prepared and then reacted in a solution contaning $Cr^{6+}$ ions. After the reaction, the concentration of the $Cr^{6+}$ ions remained in the solution was measured by ICP-OES. The reacted surface of the glasses was also analyzed by using a XRD, SEM, and EDS. When $Na_2O-RO-SiO_2-B_2O_3$ (RO=MgO, CaO, SrO, BaO) glasses were reacted with a solution containing $Cr^{6+}$ ions, the optimum removal efficiency of $Cr^{6+}$ ions was observed in the BaO glass. $Ba^{2+}$ ions leached out of these glasses combine with $Cr^{6+}$ ions in a solution to form $BaCrO_4$ crystals on the glass surface. In this manner, the $Cr^{6+}$ ions can be removed from the solution. It is conceivable that $Ba^{2+}$ ions are reacted with $Cr^{6+}$ ions in a solution immedeately after leaching out of the glasses. The pH of the solution for optimum removal of $Cr^{6+}$ ions were 3.0~5.0.

• Resources Recycling
• /
• v.12 no.1
• /
• pp.25-32
• /
• 2003

A study on the separation of heavy metals such as iron, copper, zinc and nickel from electroplating waste water has been investigated. The results showed that the PC-88A was more effective extractant for the extraction of zinc and the efficiency of zinc was to be about 100% at pH 2.5. And copper and nickel were extracted about 100% at pH 2 and more than 90% at pH 4～5 with LIX 84, respectively. On the other hand, in the case of solvent extraction of electroplating waste water(Acid-Alkali type) containing heavy metals, the ferric ion was first extracted at pH 2∼2.5 with 20% Naphthenic acid or 10% Versatic acid-10. And then, copper and zinc were extracted at pH 2 with 3% LIX 84 and at pH 2.5∼3 with 20% PC-88A respectively, remaining nickel in the raffinate. In this manner, the heavy metals in electroplating waste water could be effectively separated with solvent extraction method.

• Journal of Aquaculture
• /
• v.13 no.2
• /
• pp.137-145
• /
• 2000

Capacity of water treatment of the three phase fluidized bed reactor as a biofilter in the seawater recirculating system was evaluated. The water treatment system consists of fluidized bed reactor for ammonia removal, cartridge filter for solid removal and ozone contactor for disinfection. Mean concentration of water quality parameters: COD, TAN, $NO_2$-N, $NO_3$-N, SS and alkalinity were 9.0, 0.22, 0.05, 20.0, 9.5 and 70.0 mg/l, respectively; the relevant values were 7.6 for pH and 3.64 NTU for turbidity. These indicate the maintenance of good water quality by the treatment system. The influent TAN loading rate in to the fluidized bed reactor ranged from 4.3 to 32.9 g/$m^3$/day, and averaged to 20 g/$m^3$/day. TAN removal efficiency of each phase of the fluidized bed reactor was 47-60%, indicating the effective ammonia removal. During operation the effluent of fluidized bed reactors also maintained the unionized ammonia nitrogen level below 0.002 mg/l.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.33-43
• /
• 1994

In the present work, to clarify the mechanism of the neutral salt effect on the alkaline hydrolysis of PET, many salts with different cations like LiCl, NaCl, KCl, CsCl were added to the aqueous alkaline solutions. Then PET was hydrolyzed with aqueous solutions of many salts in alkali metal hydroxides under various conditions. Some conclusions obtained from the experimental results were summarized as follows. The reaction rate of the alkaline hydrolysis of PET was increased by the addition of neutral salts and In k was increased nearly linearly with the square root of ionic strength of reaction medium. This fact suggested that the ionic strength effect by Debye-Huckel and Bronsted theory was exerted on the reaction. The specific salt effect was also observed. The reaction rate was increased with the increase in the electrophilicity of cations of neutral salts, i. e., in the order of $Cs^+$/ < $K^+$/ $a^+$/ $i^$^+$. It was considered that the reaction rate was increased in the order of C $s^+$. < $K^+$. $a^+$. $i^+$. because the lowering effect of the cations on the negative charge of PET surface was increased with the electrophilicity of cations. It was thought that $E_{a}$ was increased because the cations of neutral salts decreased the negative charge of PET surface. It, however, was inferred from the increase in ${\Delta}$S＊ and the decrease in the ${\Delta}$G＊ that the cations of neutral salts associated with PET increased the collision frequency between carbonyl carbon and OH- ion and then accelerated the reaction rate.te.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.61-73
• /
• 1995

Inorganic salts have negative or positive effects on the rates of many chemical reactions and also the rates of acidic and alkaline hydrolysis of carboxylic esters. The direction of salt effects on the hydrolysis of ester depends on the charge of esters. It is expected that the rate of the alkaline hydrolysis of Poly(ethylene terephthalte)(PET), polymeric solid carboxytic polyester with carboxyl end group at the polymer end, is also influenced by inorganic salts. In the present work, to clarify the effect of divalent cations on the alkaline hydrolysis of PET, many salts with divalent cations like $MgCl_{2},CaCl_{2},SrCl_{2},BaCl_{2},$ were added to the aqueous alkaline solutions. Then PET was hydrolyzed with aqueous NaOH solution having many salts under various conditions. Some conclusions obtained from the experimental results were summarized as follows. Many salts with various divalent cations increased or decreased the reaction rate of alkaline hydrolysis of PET depending on their electrophilicity, hydration property, ability of ion pair formation, solubility, and the degree of interactions between divalent cations and anions, etc. The hydrolysis was interrupted in the order of $Ca^{+2} and was generally accelerated in the order of $Ba^{+2}. It was inferred from the increase in ΔS$^*$and the decrease in the ΔG$^*$that the divalent cations $Sr^{+2}$ and $Ba^{+2}$attracted by PET increased the collision frequency between carbonyl carbon and $OH^{-}$ion and then accelerated the reaction rate. $Mg^{+2}$and $Ca^{+2}$decreased the reaction rate because of their strong interaction with $OH^{-}$.

• Membrane Journal
• /
• v.13 no.2
• /
• pp.110-117
• /
• 2003

Sulfonated polyimides had been utilized and studied widely as available materials in chloro-alkali electrolysis, cationic exchange resins, and so on. However, a slow decrease in performance during experiments had been reported, which could be attributed to a loss of ionic conductivity related to either a continuous dehydration or polymer degradation. One of main reasons to account for the degradation of sulfonated polymers is the hydrolysis leading to polymer chain scission and decrement of molecular weight. Therefore, the objective of our study was to investigate possible imide cycle and additional ester bond cleavage connected with $SO_3$H presence under hydrated condition. In order to confirm and obtain as clear information as possible about breakages of bonds via $^1H\; and \;^{13}C$ NMR and IR spectroscopic analyses, our study was performed by model compound. Consequently, model compounds with both phthalic and naphthalenic imide ring and ester bonds were synthesized to evaluate the hydrolysis stability of sulfonated polyimide. The experiments were performed for prepared model compounds before and after aging in deionized water at $80^{\circ}C$ and were terminated by lyophilization technique. The aging products were finally analyzed by NMR and IR spectroscopy.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.749-753
• /
• 1998

Methoxy polyoxyethylene dodecanoates, kinds of nonionic surfactants, could be obtained from addition of ethylene oxide (5, 7, 9, and 12mol) with fatty acid methyl ester utilizing solid catalyst, metal oxide. Because ethylene oxide (EO) couldn't react directly in acid or alkali catalyst with dodecanoic acid methyl ester (DME) that had no active hydrogen, the reaction to add EO was carried out using active solid catalyst. By using IR, HPLC and $^1H$ NMR analysis, structural confirmation of methyl polyoxy ethylene dodecanate showed high yield ranging from 93 to 97%. EO unit mol number of reacted products was 5.2, 7.1, 9.2 and 12.1 mol respectively. Also, EO adduct distrobution of ethoxylated methyl laurate (MPD) had normal distribution curve like polyoxyethylene alkyl ether (AE).

• Journal of Soil and Groundwater Environment
• /
• v.14 no.1
• /
• pp.36-43
• /
• 2009

The feasibility of electrokinetic remediation was investigated in the laboratory to treat contaminated soil with Zn, Ni and F. Electro-migration and electro-osmosis are the major removal mechanisms because fluorines desorbed from soil exist as an anionic form in soil pores, and Zn and Ni exist as a cationic form. Desorption of fluorine was enhanced under the alkaline condition, but that of Zn and Ni increased under the acidic condition. Sequential pH control was effective to control the mixed wastes from contaminated soil. 2 V/cm was applied to reactor to evaluate the effect of constant voltage gradient, after two weeks, the removal efficiency of Zn, Ni and F was 20.5%, 2.5% and 57.4%, respectively. Even though the removal of Zn and Ni was very low, the pH control enhanced transport of Zn and Ni significantly. As a result, sequential pH control is a effective method to remediate mixed waste-contaminated soil.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.93-98
• /
• 2017

The fixing behaviors of raw silk yarns treated with melamine and formaldehyde at a molar ratio of 1:3 for trimethylolmelamine were investigated. Sericin was fixed during the fixing process, but a part of sericin I was removed simultaneously by hot water. The weight losses by fixing and the degumming losses by degumming greatly decreased with increasing concentrations of melamine and formaldehyde. The silk yarns fixed with 0.011 M melamine and 0.033M formaldehyde were significantly degummed due to the insufficient fixation of sericin and the alkaline hydrolysis of sericin by sodium carbonate during the degumming process. On the other hand, the silk yarns fixed with 0.055M melamine and 0.165M formaldehyde were degummed slightly (the degumming losses of 3-8%) due to the strong fixation of sericin, which might result from the many cross-linkages between the sericin I molecules, which were formed by trimethylolmelamine. Those fixed with the fixing solution containing 15% owf softener showed the lowest weight and degumming losses because under the condition of 15% owf softener, the cation of the softener can effectively form ionic bonds with the negatively charged side chain of aspartic acid in sericin. In addition, van der Waals' forces may be also formed between the hydrophobic tail of the softener and the hydrophobic region of sericin, which may help inhibit the removal of sericin I.

• Journal of the Korean Society of Groundwater Environment
• /
• v.3 no.1
• /
• pp.37-49
• /
• 1996

The objectives of this study are to investigate the groundwater and surface water contamination, to interpret the attenuation mechanism of contaminant transport, and to find the appropriate contamination indicator. at the two big landfill sites : Nanjido Landfill and Hwasung Landfill. Leachate from the Nanjido, th, Hwasung and the Kimpo waste disposal sites is characterized by high temperature (31.7-40.1$^{\circ}C$), high electric conductivity (14,650-32,800 ${\mu}$S/cm), somewhat higher pH(7.58-8.45) and low Eh (-119.4-20.4 mV), and is enriched in both major (Na$^{＋}$, K$^{＋}$, Ca$^{2＋}$, Mg$^{2＋}$, HC $O_3$$^{－}$, Cl$^{－}$) and minor (Mn, Sr$^{2＋}$, Ba$^{2＋}$, Li$^{＋}$, F$^{－}$, Br$^{－}$) ions. Municipal solid waste leachate and industrial waste leachate are effectively discriminated by the content of S $O_4$$^{2－}$, Fe, and heavy metals. The attenuation mechanism of each component was assessed using the chemical analysis. Cl-normalizing process, WATEQ4F simulation, and preceding flownet analysis. Based on the calculation of Contamination Factor, K, Na, Ca, Mg, B, Zn, HC $O_3$, Cl, F, Br and TOC are effective contamination indicators in the Nanjido landfill site, and K, Na, Ca, Mg, B, S $O_4$, HC $O_3$, Cl, F, Br and TOC in the Habsburg landfill site Particularly, TOC is the best contamination indicator in landfill sites influenced by sea water.